[4/4] MIPS: mobileye: eyeq5: add pinctrl properties to uarts
Commit Message
UART nodes are present in the platform devicetree. Add pinctrl to them
now that the pin controller is supported.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
@@ -52,6 +52,8 @@ uart0: serial@800000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 EQ5R_D0_UART0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
};
uart1: serial@900000 {
@@ -63,6 +65,8 @@ uart1: serial@900000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 EQ5R_D0_UART1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
uart2: serial@a00000 {
@@ -74,6 +78,8 @@ uart2: serial@a00000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 EQ5R_D0_UART2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
};
olb: olb@e00000 {