[2/3] arm64: dts: ac5: add watchdog nodes
Commit Message
From: Elad Nachman <enachman@marvell.com>
Add watchdog nodes to ac5 and ac5x device tree files
Signed-off-by: Elad Nachman <enachman@marvell.com>
---
arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi | 8 ++++++++
2 files changed, 22 insertions(+)
Comments
On 14/12/2023 16:04, Elad Nachman wrote:
> From: Elad Nachman <enachman@marvell.com>
>
> Add watchdog nodes to ac5 and ac5x device tree files
>
> Signed-off-by: Elad Nachman <enachman@marvell.com>
> ---
> arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 14 ++++++++++++++
> arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi | 8 ++++++++
> 2 files changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> index b5e042b8e929..e898c6bd31f0 100644
> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> @@ -307,6 +307,20 @@ nand: nand-controller@805b0000 {
> status = "disabled";
> };
>
> +/*
> + * Global Watchdog:
> + */
Messed indentation. Also unnecessary line breaks around comment, unless
you have some KPI per lines of code. If it is the only watchdog, why
even commenting on it?
> + watchdog: watchdog@80216000 {
> + compatible = "marvell,ac5-wd";
> + reg = <0x0 0x80216000 0 0x1000>,
> + <0x0 0x80215000 0 0x1000>,
> + <0x0 0x80210000 0 0x1000>,
> + <0x0 0x7f900000 0 0x1000>,
> + <0x0 0x840F8000 0 0x1000>;
Lowercase hex.
Best regards,
Krzysztof
@@ -307,6 +307,20 @@ nand: nand-controller@805b0000 {
status = "disabled";
};
+/*
+ * Global Watchdog:
+ */
+ watchdog: watchdog@80216000 {
+ compatible = "marvell,ac5-wd";
+ reg = <0x0 0x80216000 0 0x1000>,
+ <0x0 0x80215000 0 0x1000>,
+ <0x0 0x80210000 0 0x1000>,
+ <0x0 0x7f900000 0 0x1000>,
+ <0x0 0x840F8000 0 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-sec = <30>;
+ };
+
gic: interrupt-controller@80600000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@@ -15,3 +15,11 @@ / {
&cnm_clock {
clock-frequency = <325000000>;
};
+
+&watchdog {
+ reg = <0x0 0x80216000 0 0x1000>,
+ <0x0 0x80215000 0 0x1000>,
+ <0x0 0x80210000 0 0x1000>,
+ <0x0 0x7f900000 0 0x1000>,
+ <0x0 0x944F8000 0 0x1000>;
+};