[v3,07/11] leds: lm3532: use devm API to cleanup module's resources

Message ID 20231214082940.2718303-3-gnstark@salutedevices.com
State New
Headers
Series None |

Commit Message

George Stark Dec. 14, 2023, 8:29 a.m. UTC
  In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().

Signed-off-by: George Stark <gnstark@salutedevices.com>
---
 drivers/leds/leds-lm3532.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
  

Patch

diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 13662a4aa1f2..713900947e35 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -3,6 +3,7 @@ 
 // Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
 // https://www.ti.com/lit/ds/symlink/lm3532.pdf
 
+#include <linux/devm-helpers.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
@@ -542,6 +543,13 @@  static int lm3532_parse_als(struct lm3532_data *priv)
 	return ret;
 }
 
+static void gpio_set_low_action(void *data)
+{
+	struct lm3532_data *priv = (struct lm3532_data *)data;
+
+	gpiod_direction_output(priv->enable_gpio, 0);
+}
+
 static int lm3532_parse_node(struct lm3532_data *priv)
 {
 	struct fwnode_handle *child = NULL;
@@ -556,6 +564,12 @@  static int lm3532_parse_node(struct lm3532_data *priv)
 	if (IS_ERR(priv->enable_gpio))
 		priv->enable_gpio = NULL;
 
+	if (priv->enable_gpio) {
+		ret = devm_add_action(&priv->client->dev, gpio_set_low_action, priv);
+		if (ret)
+			return ret;
+	}
+
 	priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
 	if (IS_ERR(priv->regulator))
 		priv->regulator = NULL;
@@ -691,7 +705,10 @@  static int lm3532_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	mutex_init(&drvdata->lock);
+	ret = devm_mutex_init(&client->dev, &drvdata->lock);
+	if (ret)
+		return ret;
+
 	i2c_set_clientdata(client, drvdata);
 
 	ret = lm3532_parse_node(drvdata);
@@ -703,16 +720,6 @@  static int lm3532_probe(struct i2c_client *client)
 	return ret;
 }
 
-static void lm3532_remove(struct i2c_client *client)
-{
-	struct lm3532_data *drvdata = i2c_get_clientdata(client);
-
-	mutex_destroy(&drvdata->lock);
-
-	if (drvdata->enable_gpio)
-		gpiod_direction_output(drvdata->enable_gpio, 0);
-}
-
 static const struct of_device_id of_lm3532_leds_match[] = {
 	{ .compatible = "ti,lm3532", },
 	{},
@@ -727,7 +734,6 @@  MODULE_DEVICE_TABLE(i2c, lm3532_id);
 
 static struct i2c_driver lm3532_i2c_driver = {
 	.probe = lm3532_probe,
-	.remove = lm3532_remove,
 	.id_table = lm3532_id,
 	.driver = {
 		.name = LM3532_NAME,