[GIT,PULL] PowerQUICC QMC and TSA drivers updates for v6.8

Message ID 20231212105514.273e8ab0@bootlin.com
State New
Headers
Series [GIT,PULL] PowerQUICC QMC and TSA drivers updates for v6.8 |

Pull-request

git@github.com:hcodina/linux.git tags/fsl_qmc_tsa_v6.8

Message

Herve Codina Dec. 12, 2023, 9:55 a.m. UTC
  The following changes since commit 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab:

  Linux 6.7-rc3 (2023-11-26 19:59:33 -0800)

are available in the Git repository at:

  git@github.com:hcodina/linux.git tags/fsl_qmc_tsa_v6.8

for you to fetch changes up to 7a2ee1576dcc6bbe017a8283fba237b05b13fd15:

  soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime (2023-12-12 10:29:20 +0100)

----------------------------------------------------------------
PowerQUICC QMC and TSA drivers updates for v6.8

This pull request contains updates to prepare the support for the QMC
HDLC driver.
        - Perform some fixes
        - Add support for child devices
        - Add QMC dynamic timeslot support

Signed-off-by: Herve Codina <herve.codina@bootlin.com>

----------------------------------------------------------------
Herve Codina (17):
      soc: fsl: cpm1: tsa: Fix __iomem addresses declaration
      soc: fsl: cpm1: qmc: Fix __iomem addresses declaration
      soc: fsl: cpm1: qmc: Fix rx channel reset
      soc: fsl: cpm1: qmc: Extend the API to provide Rx status
      soc: fsl: cpm1: qmc: Remove inline function specifiers
      soc: fsl: cpm1: qmc: Add support for child devices
      soc: fsl: cpm1: qmc: Introduce available timeslots masks
      soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa*
      soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa*
      soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans()
      soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans()
      soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries
      soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup
      soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag
      soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()
      soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan()
      soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime

 drivers/soc/fsl/qe/qmc.c      | 658 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
 drivers/soc/fsl/qe/tsa.c      |  22 ++--
 include/soc/fsl/qe/qmc.h      |  27 ++++-
 sound/soc/fsl/fsl_qmc_audio.c |   2 +-
 4 files changed, 538 insertions(+), 171 deletions(-)
  

Comments

Arnd Bergmann Dec. 22, 2023, 10:55 a.m. UTC | #1
On Tue, Dec 12, 2023, at 09:55, Herve Codina wrote:
> The following changes since commit 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab:
>
>   Linux 6.7-rc3 (2023-11-26 19:59:33 -0800)
>
> are available in the Git repository at:
>
>   git@github.com:hcodina/linux.git tags/fsl_qmc_tsa_v6.8
>
> for you to fetch changes up to 7a2ee1576dcc6bbe017a8283fba237b05b13fd15:
>

This is not a valid git URL I can pull from. I have instead pulled from

  https://github.com/hcodina/linux.git tags/fsl_qmc_tsa_v6.8

which is what I think you meant. 

You should probably edit your .gitconfig file to add a section
like (not sure about the exact syntax, you'll figure it out).

[url "https://github.com"]
    insteadOf = git@github.com


>  drivers/soc/fsl/qe/qmc.c      | 658 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------

This is an overly long line that you probably copied from a large
terminal window. Just for readability, I recommend redirecting the
'git request-pull' output, e.g. into 'xclip' or 'cat', which will
give it the appropriate line length for emails.

      Arnd
  
Herve Codina Dec. 22, 2023, 12:34 p.m. UTC | #2
Hi Arnd,

On Fri, 22 Dec 2023 10:55:00 +0000
"Arnd Bergmann" <arnd@arndb.de> wrote:

> On Tue, Dec 12, 2023, at 09:55, Herve Codina wrote:
> > The following changes since commit 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab:
> >
> >   Linux 6.7-rc3 (2023-11-26 19:59:33 -0800)
> >
> > are available in the Git repository at:
> >
> >   git@github.com:hcodina/linux.git tags/fsl_qmc_tsa_v6.8
> >
> > for you to fetch changes up to 7a2ee1576dcc6bbe017a8283fba237b05b13fd15:
> >  
> 
> This is not a valid git URL I can pull from. I have instead pulled from
> 
>   https://github.com/hcodina/linux.git tags/fsl_qmc_tsa_v6.8
> 
> which is what I think you meant. 

Yes, exactly.
Thanks a lot for having pulled the https url.

> 
> You should probably edit your .gitconfig file to add a section
> like (not sure about the exact syntax, you'll figure it out).
> 
> [url "https://github.com"]
>     insteadOf = git@github.com
> 
> 
> >  drivers/soc/fsl/qe/qmc.c      | 658 
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------  
> 
> This is an overly long line that you probably copied from a large
> terminal window. Just for readability, I recommend redirecting the
> 'git request-pull' output, e.g. into 'xclip' or 'cat', which will
> give it the appropriate line length for emails.
> 

Thanks you these feedback and tips.
I will be more careful in the future.

Hervé