[v4,1/3] dt-bindings: arm: hwmon: gpio-fan: Convert txt bindings to yaml

  Convert fan devices connected to GPIOs to the YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v4:
 - dropped the 1st example
 - dropped unused label in 2nd example (now 1st example)

 .../devicetree/bindings/hwmon/gpio-fan.txt    | 41 -------------
 .../devicetree/bindings/hwmon/gpio-fan.yaml   | 60 +++++++++++++++++++
 2 files changed, 60 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
  

On Sat, Dec 09, 2023 at 06:15:39PM +0100, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>

I keep wondering: What does this have to do with arm (in the subject) ?

Guenter
  

Nothing, as I was working on others ARM-related bindings, it just 
sneaked in. Good catch.

Should I resend with adjusted name or can this by done by quick adjust 
before the merge?

David

On 11/12/2023 15:34, Guenter Roeck wrote:
> On Sat, Dec 09, 2023 at 06:15:39PM +0100, David Heidelberg wrote:
>> Convert fan devices connected to GPIOs to the YAML syntax.
>>
>> Signed-off-by: David Heidelberg <david@ixit.cz>
> I keep wondering: What does this have to do with arm (in the subject) ?
>
> Guenter
  

On 12/11/23 11:28, David Heidelberg wrote:
> Nothing, as I was working on others ARM-related bindings, it just sneaked in. Good catch.
> 
> Should I resend with adjusted name or can this by done by quick adjust before the merge?
> 

No need to resend. I'll fix that up, assuming you get a Reviewed-by: tag from a dt
maintainer.

Guenter

> David
> 
> On 11/12/2023 15:34, Guenter Roeck wrote:
>> On Sat, Dec 09, 2023 at 06:15:39PM +0100, David Heidelberg wrote:
>>> Convert fan devices connected to GPIOs to the YAML syntax.
>>>
>>> Signed-off-by: David Heidelberg <david@ixit.cz>
>> I keep wondering: What does this have to do with arm (in the subject) ?
>>
>> Guenter
>
  

On Mon, Dec 11, 2023 at 11:42:09AM -0800, Guenter Roeck wrote:
> On 12/11/23 11:28, David Heidelberg wrote:
> > Nothing, as I was working on others ARM-related bindings, it just sneaked in. Good catch.
> > 
> > Should I resend with adjusted name or can this by done by quick adjust before the merge?
> > 
> 
> No need to resend. I'll fix that up, assuming you get a Reviewed-by: tag from a dt
> maintainer.

I think it is okay.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
  

On Sat, 9 Dec 2023 18:15:39 +0100, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> 

Applied, thanks!

[2/3] arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
      commit: 75e8d5bad12282a35ad87db4409490b1fcd2518f

Best regards,
  

On Sat, Dec 09, 2023 at 06:15:39PM +0100, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Applied.

Thanks,
Guenter

> ---
> v4:
>  - dropped the 1st example
>  - dropped unused label in 2nd example (now 1st example)
> 
>  .../devicetree/bindings/hwmon/gpio-fan.txt    | 41 -------------
>  .../devicetree/bindings/hwmon/gpio-fan.yaml   | 60 +++++++++++++++++++
>  2 files changed, 60 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> deleted file mode 100644
> index f4cfa350f6a1..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Bindings for fan connected to GPIO lines
> -
> -Required properties:
> -- compatible : "gpio-fan"
> -
> -Optional properties:
> -- gpios: Specifies the pins that map to bits in the control value,
> -  ordered MSB-->LSB.
> -- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
> -  control value that should be set to achieve them. This array
> -  must have the RPM values in ascending order.
> -- alarm-gpios: This pin going active indicates something is wrong with
> -  the fan, and a udev event will be fired.
> -- #cooling-cells: If used as a cooling device, must be <2>
> -  Also see:
> -  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> -  min and max states are derived from the speed-map of the fan.
> -
> -Note: At least one the "gpios" or "alarm-gpios" properties must be set.
> -
> -Examples:
> -
> -	gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio1 14 1
> -			 &gpio1 13 1>;
> -		gpio-fan,speed-map = <0    0
> -				      3000 1
> -				      6000 2>;
> -		alarm-gpios = <&gpio1 15 1>;
> -	};
> -	gpio_fan_cool: gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio2 14 1
> -			 &gpio2 13 1>;
> -		gpio-fan,speed-map =	<0    0>,
> -					<3000 1>,
> -					<6000 2>;
> -		alarm-gpios = <&gpio2 15 1>;
> -		#cooling-cells = <2>; /* min followed by max */
> -	};
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> new file mode 100644
> index 000000000000..7f30cfc87350
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Fan connected to GPIO lines
> +
> +maintainers:
> +  - Rob Herring <robh@kernel.org>
> +
> +properties:
> +  compatible:
> +    const: gpio-fan
> +
> +  gpios:
> +    description: |
> +      Specifies the pins that map to bits in the control value,
> +      ordered MSB-->LSB.
> +    minItems: 1
> +    maxItems: 7
> +
> +  alarm-gpios:
> +    maxItems: 1
> +
> +  gpio-fan,speed-map:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    minItems: 2
> +    maxItems: 127
> +    items:
> +      items:
> +        - description: fan speed in RPMs
> +        - description: control value
> +    description: |
> +      A mapping of possible fan RPM speeds and the
> +      control value that should be set to achieve them. This array
> +      must have the RPM values in ascending order.
> +
> +  '#cooling-cells':
> +    const: 2
> +
> +required:
> +  - compatible
> +  - gpios
> +  - gpio-fan,speed-map
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio-fan {
> +      compatible = "gpio-fan";
> +      gpios = <&gpio2 14 1
> +               &gpio2 13 1>;
> +      gpio-fan,speed-map = <   0 0>,
> +                           <3000 1>,
> +                           <6000 2>;
> +      alarm-gpios = <&gpio2 15 1>;
> +      #cooling-cells = <2>; /* min followed by max */
> +    };
  

From: Thierry Reding <treding@nvidia.com>


On Sat, 09 Dec 2023 18:15:39 +0100, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> 

Applied, thanks!

[3/3] ARM: dts: tegra30-ouya: make dts use gpio-fan matrix instead of array
      (no commit info)

Best regards,