diff mbox series

[net-next,v4,02/13] net: phy: at803x: move disable WOL to specific at8031 probe

Message ID 20231208145200.25162-3-ansuelsmth@gmail.com
State New
Headers
Series net: phy: at803x: cleanup |

Commit Message

Christian Marangi Dec. 8, 2023, 2:51 p.m. UTC 
  Move the WOL disable call to specific at8031 probe to make at803x_probe
more generic and drop extra check for PHY ID.

Keep the same previous behaviour by first calling at803x_probe and then
disabling WOL.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/at803x.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index ef203b0807e5..b8f3c215d0e8 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -886,15 +886,6 @@  static int at803x_probe(struct phy_device *phydev)
 			priv->is_fiber = true;
 			break;
 		}
-
-		/* Disable WoL in 1588 register which is enabled
-		 * by default
-		 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     AT803X_WOL_EN, 0);
-		if (ret)
-			return ret;
 	}
 
 	return 0;
@@ -1591,6 +1582,22 @@  static int at803x_cable_test_start(struct phy_device *phydev)
 	return 0;
 }
 
+static int at8031_probe(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = at803x_probe(phydev);
+	if (ret)
+		return ret;
+
+	/* Disable WoL in 1588 register which is enabled
+	 * by default
+	 */
+	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+			      AT803X_PHY_MMD3_WOL_CTRL,
+			      AT803X_WOL_EN, 0);
+}
+
 static int qca83xx_config_init(struct phy_device *phydev)
 {
 	u8 switch_revision;
@@ -2092,7 +2099,7 @@  static struct phy_driver at803x_driver[] = {
 	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
 	.name			= "Qualcomm Atheros AR8031/AR8033",
 	.flags			= PHY_POLL_CABLE_TEST,
-	.probe			= at803x_probe,
+	.probe			= at8031_probe,
 	.config_init		= at803x_config_init,
 	.config_aneg		= at803x_config_aneg,
 	.soft_reset		= genphy_soft_reset,