Fix the following checkpatch warnings & checks:
$ ./scripts/checkpatch.pl --strict --file \
drivers/tty/serial/amba-pl011.c
CHECK: Unbalanced braces around else statement
CHECK: Unnecessary parentheses around '[...]'
CHECK: braces {} should be used on all arms of this statement
CHECK: Comparison to NULL could be written "[...]"
WARNING: Comparisons should place the constant on the right side of the test
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
drivers/tty/serial/amba-pl011.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
@@ -330,10 +330,11 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
uap->port.icount.brk++;
if (uart_handle_break(&uap->port))
continue;
- } else if (ch & UART011_DR_PE)
+ } else if (ch & UART011_DR_PE) {
uap->port.icount.parity++;
- else if (ch & UART011_DR_FE)
+ } else if (ch & UART011_DR_FE) {
uap->port.icount.frame++;
+ }
if (ch & UART011_DR_OE)
uap->port.icount.overrun++;
@@ -464,7 +465,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
* If the controller does, check for suitable residue processing
* otherwise assime all is well.
*/
- if (0 == dma_get_slave_caps(chan, &caps)) {
+ if (dma_get_slave_caps(chan, &caps) == 0) {
if (caps.residue_granularity ==
DMA_RESIDUE_GRANULARITY_DESCRIPTOR) {
dma_release_channel(chan);
@@ -503,11 +504,11 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
if (uap->dmarx.auto_poll_rate) {
u32 x;
- if (0 == of_property_read_u32(dev->of_node, "poll-rate-ms", &x))
+ if (of_property_read_u32(dev->of_node, "poll-rate-ms", &x) == 0)
uap->dmarx.poll_rate = x;
else
uap->dmarx.poll_rate = 100;
- if (0 == of_property_read_u32(dev->of_node, "poll-timeout-ms", &x))
+ if (of_property_read_u32(dev->of_node, "poll-timeout-ms", &x) == 0)
uap->dmarx.poll_timeout = x;
else
uap->dmarx.poll_timeout = 3000;
@@ -615,9 +616,9 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
if (count > PL011_DMA_BUFFER_SIZE)
count = PL011_DMA_BUFFER_SIZE;
- if (xmit->tail < xmit->head)
+ if (xmit->tail < xmit->head) {
memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
- else {
+ } else {
size_t first = UART_XMIT_SIZE - xmit->tail;
size_t second;
@@ -751,8 +752,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
pl011_write(uap->im, uap, REG_IMSC);
- } else
+ } else {
ret = false;
+ }
} else if (!(uap->dmacr & UART011_TXDMAE)) {
uap->dmacr |= UART011_TXDMAE;
pl011_write(uap->dmacr, uap, REG_DMACR);
@@ -2139,9 +2141,9 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* else we see data corruption.
*/
if (uap->vendor->oversampling) {
- if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+ if (baud >= 3000000 && baud < 3250000 && quot > 1)
quot -= 1;
- else if ((baud > 3250000) && (quot > 2))
+ else if (baud > 3250000 && quot > 2)
quot -= 2;
}
/* Set baud rate */
@@ -2668,7 +2670,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
ret = index;
} else {
seen_dev_with_alias = true;
- if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+ if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret]) {
dev_warn(dev, "requested serial port %d not available.\n", ret);
ret = index;
}
@@ -2702,7 +2704,7 @@ static int pl011_find_free_port(void)
int i;
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
- if (amba_ports[i] == NULL)
+ if (!amba_ports[i])
return i;
return -EBUSY;