From patchwork Wed Dec 6 10:58:27 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Minda Chen X-Patchwork-Id: 174489 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:bcd1:0:b0:403:3b70:6f57 with SMTP id r17csp4023923vqy; Wed, 6 Dec 2023 02:59:27 -0800 (PST) X-Google-Smtp-Source: AGHT+IE/KMZ+agyqRSIEMNur3Z9uAwc9CKl0AXcIfl2icc4MC99eP68L28bI6PHcqAcIeXQ3GeHO X-Received: by 2002:a17:903:22d0:b0:1d0:6ffd:6e69 with SMTP id y16-20020a17090322d000b001d06ffd6e69mr477703plg.97.1701860367544; Wed, 06 Dec 2023 02:59:27 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1701860367; cv=none; d=google.com; s=arc-20160816; b=ZlW1t1p9C6Ei21aNf/3uekZRQpq5QdrZr+R02cKfpNLuq5ytoOWwicd2KcRThGrP4S wqZtWU+ecWxAq1BuECBSQ6rC14juTtkNoPLll2y1pDplEI9drlJTDpPZDxJUYCI0fICc fVmga2iF5HI++fwBB+35qZbkb1slmWIlgjb5FMCmAQWvqXC6zoU2BCuw9LpSmx6yFphY e+CUJ9klszf6+T/LYYAGbK5+kgyWQcK5FOz6hdjF6uBZ+oUcdEdft0SwFc2IsYx4n3Sz GJOqD63rGzclnVhM38xtZHjanMKXLtHBAFe27aKOZA2DS60581vomC0uDnw2RO4M9bOj 0tzw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:cc:to:from; bh=HT+C62rzedQZz/Ax7lSkHoej6hQLWKhZ9ZD0r+oqlf8=; fh=ld3UXb1S5Y4IkunPfuj6e9Ppmc+fy6ncC+eQtrVLfK8=; b=z2ew5qXJ8RLuabD7xsaNXQ3MHvLBFIDUPk264GBNshRUQFd48znvRO9p+DBs6AbNNG DGWOOmOvcVOC3kDlzJySzmJnZaz0blnQF6SJf7UydpOSq6vaSP8rLA/4G5fkJlc22zWb aKiWRiefA1TXu36nXb+JVODmM9DzPVGwdRNmpy3lIcq2trvsZMoV3JKH4riBT70bUXu0 3gFLoH1P3xDDJwj5pv7bIgLhmeaP8zORKf/1GPdmu2jvslFAEI+BMJO2l2XH47FBxrOf 26J0176+FxfuC5z94Epm0sIpe0nqg/xfxJKrGPsmUOFwH2PsRYe4Gtt80vkVMNj+bRW8 ghwg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from snail.vger.email (snail.vger.email. [2620:137:e000::3:7]) by mx.google.com with ESMTPS id f9-20020a170902684900b001c9c83947d1si3693018pln.645.2023.12.06.02.59.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Dec 2023 02:59:27 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by snail.vger.email (Postfix) with ESMTP id 05F11802B043; Wed, 6 Dec 2023 02:59:26 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at snail.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377952AbjLFK7O (ORCPT + 99 others); Wed, 6 Dec 2023 05:59:14 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49708 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377886AbjLFK7B (ORCPT ); Wed, 6 Dec 2023 05:59:01 -0500 Received: from ex01.ufhost.com (ex01.ufhost.com [61.152.239.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4239518D; Wed, 6 Dec 2023 02:58:51 -0800 (PST) Received: from EXMBX165.cuchost.com (unknown [175.102.18.54]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "EXMBX165", Issuer "EXMBX165" (not verified)) by ex01.ufhost.com (Postfix) with ESMTP id 69CEC24E315; Wed, 6 Dec 2023 18:58:50 +0800 (CST) Received: from EXMBX171.cuchost.com (172.16.6.91) by EXMBX165.cuchost.com (172.16.6.75) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Wed, 6 Dec 2023 18:58:50 +0800 Received: from ubuntu.localdomain (183.27.97.199) by EXMBX171.cuchost.com (172.16.6.91) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Wed, 6 Dec 2023 18:58:49 +0800 From: Minda Chen To: Conor Dooley , =?utf-8?q?Krzysztof_Wilczy=C5=84ski?= , Rob Herring , Bjorn Helgaas , Lorenzo Pieralisi , "Daire McNamara" , Emil Renner Berthing , Krzysztof Kozlowski CC: , , , , Paul Walmsley , Palmer Dabbelt , Albert Ou , Philipp Zabel , Mason Huo , Leyfoon Tan , Kevin Xie , Minda Chen Subject: [PATCH v12 09/21] PCI: microchip: Move setup functions to pcie-plda-host.c Date: Wed, 6 Dec 2023 18:58:27 +0800 Message-ID: <20231206105839.25805-10-minda.chen@starfivetech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231206105839.25805-1-minda.chen@starfivetech.com> References: <20231206105839.25805-1-minda.chen@starfivetech.com> MIME-Version: 1.0 X-Originating-IP: [183.27.97.199] X-ClientProxiedBy: EXCAS062.cuchost.com (172.16.6.22) To EXMBX171.cuchost.com (172.16.6.91) X-YovoleRuleAgent: yovoleflag X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (snail.vger.email [0.0.0.0]); Wed, 06 Dec 2023 02:59:26 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1784529936806507231 X-GMAIL-MSGID: 1784529936806507231 Move setup functions to common pcie-plda-host.c. So these two functions can be re-used. Signed-off-by: Minda Chen Reviewed-by: Conor Dooley --- drivers/pci/controller/plda/Kconfig | 4 + drivers/pci/controller/plda/Makefile | 1 + .../pci/controller/plda/pcie-microchip-host.c | 59 -------------- drivers/pci/controller/plda/pcie-plda-host.c | 80 +++++++++++++++++++ drivers/pci/controller/plda/pcie-plda.h | 5 ++ 5 files changed, 90 insertions(+), 59 deletions(-) create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig index 5cb3be4fc98c..e54a82ee94f5 100644 --- a/drivers/pci/controller/plda/Kconfig +++ b/drivers/pci/controller/plda/Kconfig @@ -3,10 +3,14 @@ menu "PLDA-based PCIe controllers" depends on PCI +config PCIE_PLDA_HOST + bool + config PCIE_MICROCHIP_HOST tristate "Microchip AXI PCIe controller" depends on PCI_MSI && OF select PCI_HOST_COMMON + select PCIE_PLDA_HOST help Say Y here if you want kernel to support the Microchip AXI PCIe Host Bridge driver. diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile index e1a265cbf91c..4340ab007f44 100644 --- a/drivers/pci/controller/plda/Makefile +++ b/drivers/pci/controller/plda/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c index 31ca8d44ee2a..2e79bcc7c0a5 100644 --- a/drivers/pci/controller/plda/pcie-microchip-host.c +++ b/drivers/pci/controller/plda/pcie-microchip-host.c @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port) return mc_allocate_msi_domains(port); } -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, - phys_addr_t axi_addr, phys_addr_t pci_addr, - size_t size) -{ - u32 atr_sz = ilog2(size) - 1; - u32 val; - - if (index == 0) - val = PCIE_CONFIG_INTERFACE; - else - val = PCIE_TX_RX_INTERFACE; - - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_PARAM); - - val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | - ATR_IMPL_ENABLE; - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_SRCADDR_PARAM); - - val = upper_32_bits(axi_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_SRC_ADDR); - - val = lower_32_bits(pci_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_ADDR_LSB); - - val = upper_32_bits(pci_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_ADDR_UDW); - - val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); - writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); -} - -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, - struct plda_pcie_rp *port) -{ - void __iomem *bridge_base_addr = port->bridge_addr; - struct resource_entry *entry; - u64 pci_addr; - u32 index = 1; - - resource_list_for_each_entry(entry, &bridge->windows) { - if (resource_type(entry->res) == IORESOURCE_MEM) { - pci_addr = entry->res->start - entry->offset; - plda_pcie_setup_window(bridge_base_addr, index, - entry->res->start, pci_addr, - resource_size(entry->res)); - index++; - } - } - - return 0; -} - static inline void mc_clear_secs(struct mc_pcie *port) { void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR; diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c new file mode 100644 index 000000000000..19131181897f --- /dev/null +++ b/drivers/pci/controller/plda/pcie-plda-host.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PLDA PCIe XpressRich host controller driver + * + * Copyright (C) 2023 Microchip Co. Ltd + * + * Author: Daire McNamara + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-plda.h" + +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, + phys_addr_t axi_addr, phys_addr_t pci_addr, + size_t size) +{ + u32 atr_sz = ilog2(size) - 1; + u32 val; + + if (index == 0) + val = PCIE_CONFIG_INTERFACE; + else + val = PCIE_TX_RX_INTERFACE; + + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_PARAM); + + val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | + ATR_IMPL_ENABLE; + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_SRCADDR_PARAM); + + val = upper_32_bits(axi_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_SRC_ADDR); + + val = lower_32_bits(pci_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_ADDR_LSB); + + val = upper_32_bits(pci_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_ADDR_UDW); + + val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); + val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); + writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); + writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); +} +EXPORT_SYMBOL_GPL(plda_pcie_setup_window); + +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, + struct plda_pcie_rp *port) +{ + void __iomem *bridge_base_addr = port->bridge_addr; + struct resource_entry *entry; + u64 pci_addr; + u32 index = 1; + + resource_list_for_each_entry(entry, &bridge->windows) { + if (resource_type(entry->res) == IORESOURCE_MEM) { + pci_addr = entry->res->start - entry->offset; + plda_pcie_setup_window(bridge_base_addr, index, + entry->res->start, pci_addr, + resource_size(entry->res)); + index++; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems); diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h index 363fcbbaf6ec..3deefd35fa5a 100644 --- a/drivers/pci/controller/plda/pcie-plda.h +++ b/drivers/pci/controller/plda/pcie-plda.h @@ -120,4 +120,9 @@ struct plda_pcie_rp { void __iomem *bridge_addr; }; +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, + phys_addr_t axi_addr, phys_addr_t pci_addr, + size_t size); +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, + struct plda_pcie_rp *port); #endif