diff mbox series

[net-next,v2,05/12] net: phy: at803x: move specific DT option for at8031 to specific probe

Message ID 20231201001423.20989-6-ansuelsmth@gmail.com
State New
Headers
Series net: phy: at803x: cleanup |

Commit Message

Christian Marangi Dec. 1, 2023, 12:14 a.m. UTC 
  Move specific DT options for at8031 to specific probe to tidy things up
and make at803x_parse_dt more generic.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 55 ++++++++++++++++++++++------------------
 1 file changed, 31 insertions(+), 24 deletions(-)

Comments

Andrew Lunn Dec. 6, 2023, 5:11 p.m. UTC | #1 
On Fri, Dec 01, 2023 at 01:14:15AM +0100, Christian Marangi wrote:
> Move specific DT options for at8031 to specific probe to tidy things up
> and make at803x_parse_dt more generic.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 779e0835fa5d..e507bf2c9bdd 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -825,30 +825,6 @@  static int at803x_parse_dt(struct phy_device *phydev)
 		}
 	}
 
-	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
-	 * options.
-	 */
-	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
-		if (of_property_read_bool(node, "qca,keep-pll-enabled"))
-			priv->flags |= AT803X_KEEP_PLL_ENABLED;
-
-		ret = at8031_register_regulators(phydev);
-		if (ret < 0)
-			return ret;
-
-		ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
-							 "vddio");
-		if (ret) {
-			phydev_err(phydev, "failed to get VDDIO regulator\n");
-			return ret;
-		}
-
-		/* Only AR8031/8033 support 1000Base-X for SFP modules */
-		ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
-		if (ret < 0)
-			return ret;
-	}
-
 	return 0;
 }
 
@@ -1582,6 +1558,30 @@  static int at803x_cable_test_start(struct phy_device *phydev)
 	return 0;
 }
 
+static int at8031_parse_dt(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct at803x_priv *priv = phydev->priv;
+	int ret;
+
+	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
+		priv->flags |= AT803X_KEEP_PLL_ENABLED;
+
+	ret = at8031_register_regulators(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
+						 "vddio");
+	if (ret) {
+		phydev_err(phydev, "failed to get VDDIO regulator\n");
+		return ret;
+	}
+
+	/* Only AR8031/8033 support 1000Base-X for SFP modules */
+	return phy_sfp_probe(phydev, &at803x_sfp_ops);
+}
+
 static int at8031_probe(struct phy_device *phydev)
 {
 	int ret;
@@ -1590,6 +1590,13 @@  static int at8031_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
+	 * options.
+	 */
+	ret = at8031_parse_dt(phydev);
+	if (ret)
+		return ret;
+
 	/* Disable WoL in 1588 register which is enabled
 	 * by default
 	 */