diff mbox series

[v9,3/3] ARM64: dts: Add special compatibles for the Turris Mox

Message ID 20231127-mv88e6xxx-mvebu-fixes-v9-3-d19b963e81fb@linaro.org
State New
Headers
Series ARM/ARM64: dts: mv88e6xxx fixes for Marvell |

Commit Message

Linus Walleij Nov. 27, 2023, 3:51 p.m. UTC 
  These special compatibles are added to the Marvell Armada 3720
Turris Mox in order to be able to special-case and avoid
warnings on the non-standard nodenames that are ABI on this
one board due to being used in deployed versions of U-Boot.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Andrew Lunn Nov. 27, 2023, 10:10 p.m. UTC | #1 
On Mon, Nov 27, 2023 at 04:51:02PM +0100, Linus Walleij wrote:
> These special compatibles are added to the Marvell Armada 3720
> Turris Mox in order to be able to special-case and avoid
> warnings on the non-standard nodenames that are ABI on this
> one board due to being used in deployed versions of U-Boot.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Gregory CLEMENT Dec. 8, 2023, 3:11 p.m. UTC | #2 
Linus Walleij <linus.walleij@linaro.org> writes:

> These special compatibles are added to the Marvell Armada 3720
> Turris Mox in order to be able to special-case and avoid
> warnings on the non-standard nodenames that are ABI on this
> one board due to being used in deployed versions of U-Boot.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Applied on mvebu/dt64

Thanks,

Gregory
> ---
>  arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 66cd98b67744..a89747d2a600 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -312,7 +312,7 @@  phy1: ethernet-phy@1 {
 	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
 	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -438,7 +438,7 @@  port-sfp@a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -506,7 +506,7 @@  port@5 {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -632,7 +632,7 @@  port-sfp@a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -700,7 +700,7 @@  port@5 {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,7 +817,7 @@  port-sfp@a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;