[2/2] arm64: dts: amlogic: minor whitespace cleanup around '='
Commit Message
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
Comments
On 24/11/2023 10:47, Krzysztof Kozlowski wrote:
> The DTS code coding style expects exactly one space before and after '='
> sign.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Please ignore, that's duplicated of my previous send.
Best regards,
Krzysztof
Hi,
On 24/11/2023 10:49, Krzysztof Kozlowski wrote:
> On 24/11/2023 10:47, Krzysztof Kozlowski wrote:
>> The DTS code coding style expects exactly one space before and after '='
>> sign.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>
> Please ignore, that's duplicated of my previous send.
I don't see a previous send, so I'm confused.
I can apply this patch if you're ok.
Thanks,
Neil
>
> Best regards,
> Krzysztof
>
On 11/12/2023 10:10, Neil Armstrong wrote:
> Hi,
>
> On 24/11/2023 10:49, Krzysztof Kozlowski wrote:
>> On 24/11/2023 10:47, Krzysztof Kozlowski wrote:
>>> The DTS code coding style expects exactly one space before and after '='
>>> sign.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> ---
>>
>> Please ignore, that's duplicated of my previous send.
>
> I don't see a previous send, so I'm confused.
> I can apply this patch if you're ok.
This was the original submission, which you applied (Thank you):
https://lore.kernel.org/all/20231124094700.58071-1-krzysztof.kozlowski@linaro.org/
Both patches here can be ignored (applied through different series).
Best regards,
Krzysztof
On 11/12/2023 11:38, Krzysztof Kozlowski wrote:
> On 11/12/2023 10:10, Neil Armstrong wrote:
>> Hi,
>>
>> On 24/11/2023 10:49, Krzysztof Kozlowski wrote:
>>> On 24/11/2023 10:47, Krzysztof Kozlowski wrote:
>>>> The DTS code coding style expects exactly one space before and after '='
>>>> sign.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> ---
>>>
>>> Please ignore, that's duplicated of my previous send.
>>
>> I don't see a previous send, so I'm confused.
>> I can apply this patch if you're ok.
>
> This was the original submission, which you applied (Thank you):
> https://lore.kernel.org/all/20231124094700.58071-1-krzysztof.kozlowski@linaro.org/
>
> Both patches here can be ignored (applied through different series).
Ah ok, right!
>
> Best regards,
> Krzysztof
>
@@ -30,7 +30,7 @@ &sd_emmc_b {
&uart_B {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
};
@@ -369,7 +369,7 @@ &uart_A {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
@@ -487,7 +487,7 @@ &uart_A {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};