Instead of open coding the capability structure search, find the PM
Capability using pci_find_capability().
While at it, rename the generic 'cap_pointer' to 'pm_cap' which makes
the intent of the code more obvious.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
.../wireless/realtek/rtlwifi/rtl8821ae/hw.c | 49 +++----------------
1 file changed, 8 insertions(+), 41 deletions(-)
@@ -2270,42 +2270,11 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- u16 cap_hdr;
- u8 cap_pointer;
- u8 cap_id = 0xff;
u8 pmcs_reg;
- u8 cnt = 0;
+ u8 pm_cap;
- /* Get the Capability pointer first,
- * the Capability Pointer is located at
- * offset 0x34 from the Function Header */
-
- pci_read_config_byte(rtlpci->pdev, 0x34, &cap_pointer);
- rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
- "PCI configuration 0x34 = 0x%2x\n", cap_pointer);
-
- do {
- pci_read_config_word(rtlpci->pdev, cap_pointer, &cap_hdr);
- cap_id = cap_hdr & 0xFF;
-
- rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
- "in pci configuration, cap_pointer%x = %x\n",
- cap_pointer, cap_id);
-
- if (cap_id == 0x01) {
- break;
- } else {
- /* point to next Capability */
- cap_pointer = (cap_hdr >> 8) & 0xFF;
- /* 0: end of pci capability, 0xff: invalid value */
- if (cap_pointer == 0x00 || cap_pointer == 0xff) {
- cap_id = 0xff;
- break;
- }
- }
- } while (cnt++ < 200);
-
- if (cap_id != 0x01) {
+ pm_cap = pci_find_capability(rtlpci->pdev, PCI_CAP_ID_PM);
+ if (!pm_cap) {
rtl_dbg(rtlpriv, COMP_INIT, DBG_WARNING,
"Cannot find PME Capability\n");
return;
@@ -2314,22 +2283,20 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
/* Get the PM CSR (Control/Status Register),
* The PME_Status is located at PM Capatibility offset 5, bit 7
*/
- pci_read_config_byte(rtlpci->pdev, cap_pointer + 5, &pmcs_reg);
+ pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
if (pmcs_reg & BIT(7)) {
/* Clear PME_Status with write */
- pci_write_config_byte(rtlpci->pdev, cap_pointer + 5,
- pmcs_reg);
+ pci_write_config_byte(rtlpci->pdev, pm_cap + 5, pmcs_reg);
/* Read it back to check */
- pci_read_config_byte(rtlpci->pdev, cap_pointer + 5,
- &pmcs_reg);
+ pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
"Clear PME status 0x%2x to 0x%2x\n",
- cap_pointer + 5, pmcs_reg);
+ pm_cap + 5, pmcs_reg);
} else {
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
"PME status(0x%2x) = 0x%2x\n",
- cap_pointer + 5, pmcs_reg);
+ pm_cap + 5, pmcs_reg);
}
}