[v5,4/5] tty: Add SBI debug console support to HVC SBI driver

Message ID 20231124070905.1043092-5-apatel@ventanamicro.com
State New
Headers
Series RISC-V SBI debug console extension support |

Commit Message

Anup Patel Nov. 24, 2023, 7:09 a.m. UTC
  From: Atish Patra <atishp@rivosinc.com>

RISC-V SBI specification supports advanced debug console
support via SBI DBCN extension.

Extend the HVC SBI driver to support it.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/tty/hvc/Kconfig         |  2 +-
 drivers/tty/hvc/hvc_riscv_sbi.c | 37 ++++++++++++++++++++++++++-------
 2 files changed, 31 insertions(+), 8 deletions(-)
  

Comments

Andrew Jones Nov. 24, 2023, 5:31 p.m. UTC | #1
On Fri, Nov 24, 2023 at 12:39:04PM +0530, Anup Patel wrote:
> From: Atish Patra <atishp@rivosinc.com>
> 
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
> 
> Extend the HVC SBI driver to support it.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 37 ++++++++++++++++++++++++++-------
>  2 files changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 4f9264d005c0..6e05c5c7bca1 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
>  
>  config HVC_RISCV_SBI
>  	bool "RISC-V SBI console support"
> -	depends on RISCV_SBI_V01
> +	depends on RISCV_SBI
>  	select HVC_DRIVER
>  	help
>  	  This enables support for console output via RISC-V SBI calls, which
> diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> index 31f53fa77e4a..2f3571f17ecd 100644
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -39,21 +39,44 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
>  	return i;
>  }
>  
> -static const struct hv_ops hvc_sbi_ops = {
> +static const struct hv_ops hvc_sbi_v01_ops = {
>  	.get_chars = hvc_sbi_tty_get,
>  	.put_chars = hvc_sbi_tty_put,
>  };
>  
> -static int __init hvc_sbi_init(void)
> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	return sbi_debug_console_write(buf, count);
>  }
> -device_initcall(hvc_sbi_init);
>  
> -static int __init hvc_sbi_console_init(void)
> +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
>  {
> -	hvc_instantiate(0, 0, &hvc_sbi_ops);
> +	return sbi_debug_console_read(buf, count);
> +}
> +
> +static const struct hv_ops hvc_sbi_dbcn_ops = {
> +	.put_chars = hvc_sbi_dbcn_tty_put,
> +	.get_chars = hvc_sbi_dbcn_tty_get,
> +};
> +
> +static int __init hvc_sbi_init(void)
> +{
> +	int err;
> +
> +	if (sbi_debug_console_available) {
> +		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 256));
> +		if (err)
> +			return err;
> +		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
> +	} else if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
> +		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 256));
> +		if (err)
> +			return err;
> +		hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
> +	} else {
> +		return -ENODEV;
> +	}
>  
>  	return 0;
>  }
> -console_initcall(hvc_sbi_console_init);
> +device_initcall(hvc_sbi_init);
> -- 
> 2.34.1
>

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
  
Greg KH Nov. 28, 2023, 7:21 p.m. UTC | #2
On Fri, Nov 24, 2023 at 12:39:04PM +0530, Anup Patel wrote:
> From: Atish Patra <atishp@rivosinc.com>
> 
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
> 
> Extend the HVC SBI driver to support it.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 37 ++++++++++++++++++++++++++-------
>  2 files changed, 31 insertions(+), 8 deletions(-)

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  

Patch

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 4f9264d005c0..6e05c5c7bca1 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -108,7 +108,7 @@  config HVC_DCC_SERIALIZE_SMP
 
 config HVC_RISCV_SBI
 	bool "RISC-V SBI console support"
-	depends on RISCV_SBI_V01
+	depends on RISCV_SBI
 	select HVC_DRIVER
 	help
 	  This enables support for console output via RISC-V SBI calls, which
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
index 31f53fa77e4a..2f3571f17ecd 100644
--- a/drivers/tty/hvc/hvc_riscv_sbi.c
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -39,21 +39,44 @@  static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
 	return i;
 }
 
-static const struct hv_ops hvc_sbi_ops = {
+static const struct hv_ops hvc_sbi_v01_ops = {
 	.get_chars = hvc_sbi_tty_get,
 	.put_chars = hvc_sbi_tty_put,
 };
 
-static int __init hvc_sbi_init(void)
+static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
 {
-	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+	return sbi_debug_console_write(buf, count);
 }
-device_initcall(hvc_sbi_init);
 
-static int __init hvc_sbi_console_init(void)
+static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
 {
-	hvc_instantiate(0, 0, &hvc_sbi_ops);
+	return sbi_debug_console_read(buf, count);
+}
+
+static const struct hv_ops hvc_sbi_dbcn_ops = {
+	.put_chars = hvc_sbi_dbcn_tty_put,
+	.get_chars = hvc_sbi_dbcn_tty_get,
+};
+
+static int __init hvc_sbi_init(void)
+{
+	int err;
+
+	if (sbi_debug_console_available) {
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 256));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
+	} else if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 256));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
+	} else {
+		return -ENODEV;
+	}
 
 	return 0;
 }
-console_initcall(hvc_sbi_console_init);
+device_initcall(hvc_sbi_init);