diff mbox series

[net,v2,1/1] net: stmmac: xgmac: Disable FPE MMC interrupts

Message ID 20231124015433.2223696-1-0x1207@gmail.com
State New
Headers
Series [net,v2,1/1] net: stmmac: xgmac: Disable FPE MMC interrupts |

Commit Message

Furong Xu Nov. 24, 2023, 1:54 a.m. UTC 
  Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.

Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Signed-off-by: Furong Xu <0x1207@gmail.com>
---
Changes in v2:
  - Update commit message, thanks Wojciech and Andrew.
---
 drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Larysa Zaremba Nov. 24, 2023, 9:19 a.m. UTC | #1 
On Fri, Nov 24, 2023 at 09:54:33AM +0800, Furong Xu wrote:
> Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
> by default") tries to disable MMC interrupts to avoid a storm of
> unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
> interrupts enabled.

Now commit message is lacking something like "FPE MMC interrupts can cause the 
same problem", but I think it is good enough.

Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>

> Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
> 
> Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
> Signed-off-by: Furong Xu <0x1207@gmail.com>
> ---
> Changes in v2:
>   - Update commit message, thanks Wojciech and Andrew.
> ---
>  drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> index ea4910ae0921..cdd7fbde2bfa 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> @@ -177,8 +177,10 @@
>  #define MMC_XGMAC_RX_DISCARD_OCT_GB	0x1b4
>  #define MMC_XGMAC_RX_ALIGN_ERR_PKT	0x1bc
>  
> +#define MMC_XGMAC_FPE_TX_INTR_MASK	0x204
>  #define MMC_XGMAC_TX_FPE_FRAG		0x208
>  #define MMC_XGMAC_TX_HOLD_REQ		0x20c
> +#define MMC_XGMAC_FPE_RX_INTR_MASK	0x224
>  #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR	0x228
>  #define MMC_XGMAC_RX_PKT_SMD_ERR	0x22c
>  #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK	0x230
> @@ -352,6 +354,8 @@ static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr)
>  {
>  	writel(0x0, mmcaddr + MMC_RX_INTR_MASK);
>  	writel(0x0, mmcaddr + MMC_TX_INTR_MASK);
> +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_TX_INTR_MASK);
> +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_RX_INTR_MASK);
>  	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK);
>  }
>  
> -- 
> 2.34.1
> 
>
Serge Semin Nov. 24, 2023, 5:03 p.m. UTC | #2 
On Fri, Nov 24, 2023 at 09:54:33AM +0800, Furong Xu wrote:
> Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
> by default") tries to disable MMC interrupts to avoid a storm of
> unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
> interrupts enabled.
> Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
> 
> Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
> Signed-off-by: Furong Xu <0x1207@gmail.com>
> ---
> Changes in v2:
>   - Update commit message, thanks Wojciech and Andrew.
> ---
>  drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> index ea4910ae0921..cdd7fbde2bfa 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> @@ -177,8 +177,10 @@
>  #define MMC_XGMAC_RX_DISCARD_OCT_GB	0x1b4
>  #define MMC_XGMAC_RX_ALIGN_ERR_PKT	0x1bc
>  

> +#define MMC_XGMAC_FPE_TX_INTR_MASK	0x204
>  #define MMC_XGMAC_TX_FPE_FRAG		0x208
>  #define MMC_XGMAC_TX_HOLD_REQ		0x20c
> +#define MMC_XGMAC_FPE_RX_INTR_MASK	0x224

Could you please preserve the local implicit naming convention of
having the Tx_ and RX_ prefixes being placed before the rest of
CSR-specific name part:
#define MMC_XGMAC_TX_FPE_INTR_MASK
instead of
#define MMC_XGMAC_FPE_TX_INTR_MASK
and
#define MMC_XGMAC_RX_FPE_INTR_MASK
instead of
#define MMC_XGMAC_FPE_RX_INTR_MASK

Your macros will then look similar to MMC_XGMAC_TX_*, MMC_XGMAC_RX_*
and finally MMC_XGMAC_RX_IPC_INTR_MASK macros.

-Serge(y)

>  #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR	0x228
>  #define MMC_XGMAC_RX_PKT_SMD_ERR	0x22c
>  #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK	0x230
> @@ -352,6 +354,8 @@ static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr)
>  {
>  	writel(0x0, mmcaddr + MMC_RX_INTR_MASK);
>  	writel(0x0, mmcaddr + MMC_TX_INTR_MASK);
> +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_TX_INTR_MASK);
> +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_RX_INTR_MASK);
>  	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK);
>  }
>  
> -- 
> 2.34.1
> 
>
Furong Xu Nov. 25, 2023, 5:28 a.m. UTC | #3 
On Fri, 24 Nov 2023 20:03:43 +0300
Serge Semin <fancer.lancer@gmail.com> wrote:

> On Fri, Nov 24, 2023 at 09:54:33AM +0800, Furong Xu wrote:
> > Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
> > by default") tries to disable MMC interrupts to avoid a storm of
> > unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
> > interrupts enabled.
> > Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
> > 
> > Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
> > Signed-off-by: Furong Xu <0x1207@gmail.com>
> > ---
> > Changes in v2:
> >   - Update commit message, thanks Wojciech and Andrew.
> > ---
> >  drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> > index ea4910ae0921..cdd7fbde2bfa 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> > @@ -177,8 +177,10 @@
> >  #define MMC_XGMAC_RX_DISCARD_OCT_GB	0x1b4
> >  #define MMC_XGMAC_RX_ALIGN_ERR_PKT	0x1bc
> >    
> 
> > +#define MMC_XGMAC_FPE_TX_INTR_MASK	0x204
> >  #define MMC_XGMAC_TX_FPE_FRAG		0x208
> >  #define MMC_XGMAC_TX_HOLD_REQ		0x20c
> > +#define MMC_XGMAC_FPE_RX_INTR_MASK	0x224  
> 
> Could you please preserve the local implicit naming convention of
> having the Tx_ and RX_ prefixes being placed before the rest of
> CSR-specific name part:
> #define MMC_XGMAC_TX_FPE_INTR_MASK
> instead of
> #define MMC_XGMAC_FPE_TX_INTR_MASK
> and
> #define MMC_XGMAC_RX_FPE_INTR_MASK
> instead of
> #define MMC_XGMAC_FPE_RX_INTR_MASK
> 
> Your macros will then look similar to MMC_XGMAC_TX_*, MMC_XGMAC_RX_*
> and finally MMC_XGMAC_RX_IPC_INTR_MASK macros.
> 
> -Serge(y)
> 

Hi Serge,

Thanks for your advice, I copied these register names from Synopsys Databook, and
forgot to preserve the local implicit naming convention, I will send a new patch.

> >  #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR	0x228
> >  #define MMC_XGMAC_RX_PKT_SMD_ERR	0x22c
> >  #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK	0x230
> > @@ -352,6 +354,8 @@ static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr)
> >  {
> >  	writel(0x0, mmcaddr + MMC_RX_INTR_MASK);
> >  	writel(0x0, mmcaddr + MMC_TX_INTR_MASK);
> > +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_TX_INTR_MASK);
> > +	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_RX_INTR_MASK);
> >  	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK);
> >  }
> >  
> > -- 
> > 2.34.1
> > 
> >
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
index ea4910ae0921..cdd7fbde2bfa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -177,8 +177,10 @@ 
 #define MMC_XGMAC_RX_DISCARD_OCT_GB	0x1b4
 #define MMC_XGMAC_RX_ALIGN_ERR_PKT	0x1bc
 
+#define MMC_XGMAC_FPE_TX_INTR_MASK	0x204
 #define MMC_XGMAC_TX_FPE_FRAG		0x208
 #define MMC_XGMAC_TX_HOLD_REQ		0x20c
+#define MMC_XGMAC_FPE_RX_INTR_MASK	0x224
 #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR	0x228
 #define MMC_XGMAC_RX_PKT_SMD_ERR	0x22c
 #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK	0x230
@@ -352,6 +354,8 @@  static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr)
 {
 	writel(0x0, mmcaddr + MMC_RX_INTR_MASK);
 	writel(0x0, mmcaddr + MMC_TX_INTR_MASK);
+	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_TX_INTR_MASK);
+	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_FPE_RX_INTR_MASK);
 	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK);
 }