rtc: rv8803: Add power management support

Message ID 20231122181611.164792-1-eichest@gmail.com
State New
Headers
Series rtc: rv8803: Add power management support |

Commit Message

Stefan Eichenberger Nov. 22, 2023, 6:16 p.m. UTC
  Add power management support to the driver. This allows a SoC to wake
from suspend using the nINT provided by the RTC. Only register it as a
wakeup device if the interrupt is provided and handled.

Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
---
 drivers/rtc/rtc-rv8803.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
  

Comments

Alexandre Belloni Jan. 8, 2024, 12:31 a.m. UTC | #1
On Wed, 22 Nov 2023 19:16:11 +0100, Stefan Eichenberger wrote:
> Add power management support to the driver. This allows a SoC to wake
> from suspend using the nINT provided by the RTC. Only register it as a
> wakeup device if the interrupt is provided and handled.
> 
> 

Applied, thanks!

[1/1] rtc: rv8803: Add power management support
      commit: 2f80de657f83a1f6495e557096847f4626d57164

Best regards,
  

Patch

diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 1a3ec1bb5b814..11e6b0d31f5d7 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -17,6 +17,7 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/rtc.h>
+#include <linux/pm_wakeirq.h>
 
 #define RV8803_I2C_TRY_COUNT		4
 
@@ -607,6 +608,28 @@  static int rv8803_regs_configure(struct rv8803_data *rv8803)
 	return 0;
 }
 
+static int rv8803_resume(struct device *dev)
+{
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+
+	if (rv8803->client->irq > 0 && device_may_wakeup(dev))
+		disable_irq_wake(rv8803->client->irq);
+
+	return 0;
+}
+
+static int rv8803_suspend(struct device *dev)
+{
+	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
+
+	if (rv8803->client->irq > 0 && device_may_wakeup(dev))
+		enable_irq_wake(rv8803->client->irq);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rv8803_pm_ops, rv8803_suspend, rv8803_resume);
+
 static const struct i2c_device_id rv8803_id[] = {
 	{ "rv8803", rv_8803 },
 	{ "rv8804", rx_8804 },
@@ -683,6 +706,11 @@  static int rv8803_probe(struct i2c_client *client)
 		if (err) {
 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
 			client->irq = 0;
+		} else {
+			device_init_wakeup(&client->dev, true);
+			err = dev_pm_set_wake_irq(&client->dev, client->irq);
+			if (err)
+				dev_err(&client->dev, "failed to set wake IRQ\n");
 		}
 	}
 	if (!client->irq)
@@ -737,6 +765,7 @@  static struct i2c_driver rv8803_driver = {
 	.driver = {
 		.name = "rtc-rv8803",
 		.of_match_table = of_match_ptr(rv8803_of_match),
+		.pm = &rv8803_pm_ops,
 	},
 	.probe		= rv8803_probe,
 	.id_table	= rv8803_id,