[v3,1/2] hwmon: (nct6775) Add support for 2 additional fan controls
Commit Message
From: Xing Tong Wu <xingtong.wu@siemens.com>
The nct6116 has 2 additional PWM pins compared to the nct6106.
Extend the nct6106 PWM arrays to support the nct6116.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
---
drivers/hwmon/nct6775-core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Comments
On Tue, Nov 21, 2023 at 04:16:03PM +0800, Xing Tong Wu wrote:
> From: Xing Tong Wu <xingtong.wu@siemens.com>
>
> The nct6116 has 2 additional PWM pins compared to the nct6106.
> Extend the nct6106 PWM arrays to support the nct6116.
>
> Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Applied.
Thanks,
Guenter
@@ -767,9 +767,9 @@ static const u16 NCT6106_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4 };
static const u16 NCT6106_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6 };
static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4 };
-static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 };
-static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 };
-static const u16 NCT6106_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c };
+static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3, 0, 0 };
+static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04, 0, 0 };
+static const u16 NCT6106_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c, 0xd8, 0xd9 };
static const u16 NCT6106_REG_FAN_MODE[] = { 0x113, 0x123, 0x133 };
static const u16 NCT6106_REG_TEMP_SOURCE[] = {
0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5 };
@@ -3595,7 +3595,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data,
break;
case nct6116:
data->in_num = 9;
- data->pwm_num = 3;
+ data->pwm_num = 5;
data->auto_pwm_num = 4;
data->temp_fixed_num = 3;
data->num_temp_alarms = 3;