diff mbox series

[v2,2/2] dt-bindings: perf: starfive: Add StarLink PMU

Message ID 20231114021254.3009799-3-jisheng.teoh@starfivetech.com
State New
Headers
Series StarFive's StarLink PMU Support |

Commit Message

JiSheng Teoh Nov. 14, 2023, 2:12 a.m. UTC 
  Add device tree binding for StarFive's StarLink PMU (Performance
Monitor Unit).

Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
---
 .../bindings/perf/starfive,starlink-pmu.yaml  | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml

Comments

Conor Dooley Nov. 14, 2023, 5:57 p.m. UTC | #1 
On Tue, Nov 14, 2023 at 10:12:54AM +0800, Ji Sheng Teoh wrote:
> Add device tree binding for StarFive's StarLink PMU (Performance
> Monitor Unit).
> 
> Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
> ---
>  .../bindings/perf/starfive,starlink-pmu.yaml  | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> new file mode 100644
> index 000000000000..b164f6849055
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/perf/starfive,starlink-pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive StarLink PMU
> +
> +maintainers:
> +  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
> +
> +description:
> +  StarFive's StarLink PMU integrates one or more CPU cores with a shared L3
> +  memory system. The PMU support overflow interrupt, up to 16 programmable
> +  64bit event counters, and an independent 64bit cycle counter.
> +  StarLink PMU is accessed via MMIO.
> +
> +properties:
> +  compatible:
> +    const: starfive,starlink-pmu

This compatible (in isolation) is far too generic. Please add a device
specific compatible for the device that has this PMU.

Thanks,
Conor.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        l3_pmu: pmu@12900000 {
> +            compatible = "starfive,starlink-pmu";
> +            reg = <0x0 0x12900000 0x0 0x10000>;
> +            interrupts = <34>;
> +        };
> +    };
> -- 
> 2.25.1
>
JiSheng Teoh Nov. 15, 2023, 2:57 a.m. UTC | #2 
On Tue, 14 Nov 2023 17:57:15 +0000
Conor Dooley <conor@kernel.org> wrote:

> On Tue, Nov 14, 2023 at 10:12:54AM +0800, Ji Sheng Teoh wrote:
> > Add device tree binding for StarFive's StarLink PMU (Performance
> > Monitor Unit).
> > 
> > Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
> > ---
> >  .../bindings/perf/starfive,starlink-pmu.yaml  | 46
> > +++++++++++++++++++ 1 file changed, 46 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> > b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> > new file mode 100644 index 000000000000..b164f6849055 --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
> > @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR
> > BSD-2-Clause +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/perf/starfive,starlink-pmu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: StarFive StarLink PMU
> > +
> > +maintainers:
> > +  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
> > +
> > +description:
> > +  StarFive's StarLink PMU integrates one or more CPU cores with a
> > shared L3
> > +  memory system. The PMU support overflow interrupt, up to 16
> > programmable
> > +  64bit event counters, and an independent 64bit cycle counter.
> > +  StarLink PMU is accessed via MMIO.
> > +
> > +properties:
> > +  compatible:
> > +    const: starfive,starlink-pmu  
> 
> This compatible (in isolation) is far too generic. Please add a device
> specific compatible for the device that has this PMU.
> 
> Thanks,
> Conor.

Thanks Conor, I will fix that in v3.

> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        l3_pmu: pmu@12900000 {
> > +            compatible = "starfive,starlink-pmu";
> > +            reg = <0x0 0x12900000 0x0 0x10000>;
> > +            interrupts = <34>;
> > +        };
> > +    };
> > -- 
> > 2.25.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
new file mode 100644
index 000000000000..b164f6849055
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/starfive,starlink-pmu.yaml
@@ -0,0 +1,46 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/starfive,starlink-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive StarLink PMU
+
+maintainers:
+  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
+
+description:
+  StarFive's StarLink PMU integrates one or more CPU cores with a shared L3
+  memory system. The PMU support overflow interrupt, up to 16 programmable
+  64bit event counters, and an independent 64bit cycle counter.
+  StarLink PMU is accessed via MMIO.
+
+properties:
+  compatible:
+    const: starfive,starlink-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        l3_pmu: pmu@12900000 {
+            compatible = "starfive,starlink-pmu";
+            reg = <0x0 0x12900000 0x0 0x10000>;
+            interrupts = <34>;
+        };
+    };