From patchwork Mon Nov 13 23:36:00 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 164681 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp1541673vqg; Mon, 13 Nov 2023 15:38:15 -0800 (PST) X-Google-Smtp-Source: AGHT+IFvBcwq80JP3l0gweAaHrTXKTxW0288PdHBsfClVUnYN0YekodjRjch4ju7t1FIV2B0niRk X-Received: by 2002:a17:90b:4b82:b0:271:7cd6:165d with SMTP id lr2-20020a17090b4b8200b002717cd6165dmr6401334pjb.26.1699918695326; Mon, 13 Nov 2023 15:38:15 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1699918695; cv=none; d=google.com; s=arc-20160816; b=AZb0xb0X/b2H0sB76/ydjiceQaLNo9gPQj9IoomiRmb7PXYseM5iRcQBZbtaUzKx+1 MEZ5HrSQArCyARyS3jnSl/PJcdXxVFUW6a2tskb1k4NH1NRD3w7PCA6a/yPe20MYNQf7 bjWEAOJWBnsuUGkFD41Vu5i/+BdDvosdGAS2XjkOFwBoJG04CIW1OCpaz1is36kclflk LUmsl/s+tVVbHG/HdqUyPFtvQKHI+Klb0C0gNleAfBP27v6RyVqk+tcM8D/rc3yBQayG 29uZnX1eUimrNvUn6JZvPbFHE+0CxMABZ4vOaXyU7m63LL63wrC06isccaBtc+nXaKRS /xjg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=CmeI3rI1EdZ3yymalOF2Lv3t7TF652sPTV2+WklP064=; fh=Qn3jhRY9S3Zj3Ijvdjardo60eYqeZ1BcwjLPckgZ+rI=; b=ZjFXCsXL8xa9/YG6TJZiMbA8jcT6Nfqg8eEb94rGjK3AT/Y+/vhVrlOPYYRmLLK/GB XV6uVsRPmxR2VAoBd9LhxAjzniy8U4MylVUh3XPJkib0Aw9+D03pEuKw120BHI8W1D7n Tm5D8bCNQo8MjGuf1QqozFCeMO4XHjV8vWLc6jBnYaAoRxNS9KqmX1kq3/dP1zD8Awi6 uwsTFvqBWjNNMXmXzvGVCqOHV/UAwfAKug0JaVR/2RocHsjdyprVPeSTIPtx6RC5l4iE 30TFr36d/qur/fgOnmW6K9nt/+0KwZhn2stAFzG/ZxrsZqFu4KNI7lEyUmbS/VsFGNee Joow== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=iRBViyIG; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from snail.vger.email (snail.vger.email. [23.128.96.37]) by mx.google.com with ESMTPS id f2-20020a17090a664200b002790c6760dbsi11288449pjm.70.2023.11.13.15.38.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:38:15 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=iRBViyIG; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by snail.vger.email (Postfix) with ESMTP id 8AD29809848D; Mon, 13 Nov 2023 15:36:41 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at snail.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232001AbjKMXg2 (ORCPT + 30 others); Mon, 13 Nov 2023 18:36:28 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36436 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231945AbjKMXgP (ORCPT ); Mon, 13 Nov 2023 18:36:15 -0500 Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 31214D6F for ; Mon, 13 Nov 2023 15:36:05 -0800 (PST) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c503dbe50dso69712591fa.1 for ; Mon, 13 Nov 2023 15:36:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918563; x=1700523363; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=CmeI3rI1EdZ3yymalOF2Lv3t7TF652sPTV2+WklP064=; b=iRBViyIGO646HAQuvzrQK0bsZ0lm7zMjudAPOHELMbImj9t1neO/XVmoMWwYuAbo7D 8uMd81JqdsQzfv3D3tVbB5FyVHLg61gVqQ2FTHYHISa6IwEGjKpY6L2amzQWA2fceVSR rIXS7d1NiHSbft4t4aJcrIaNvlamMmVkfqTCKGZO9QbpnCv/6wNUhqdXvGGqP8iaJS9Z TujVv5Rih2fEWEuiRcU/mtY5QJ/VQ8Zlg2rsi1oJAuR7kr5gnzVyWITGt3iGtBn5cZd8 VO5jCF3BBH5A2NJHC3mRY9pSSQa5brmNx/31Xc4RtaBUNWnRjLkI6qXWpLzyhGl6k/wm zB7g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918563; x=1700523363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=CmeI3rI1EdZ3yymalOF2Lv3t7TF652sPTV2+WklP064=; b=gJsbdWAIc8OESfHzD+5g+Y+bAVLxXBtBlvAbZHcjzTGIQHu0VUdwBWk7r/bhOeDqgR RmnrRsaLpYBoF+0pKcqisv5HyHmfDH5+0QSm66LtJV4sGAC5/CPrFFc9LO6Jd0LkXbtS c2HjGy6ZHELye/L2vgXvfAnfheUppALDePHRNmY2E0fs+OGmN1lQroUmdeS5ffoi/94D jNrEPCgvSiNxm37Jkfcc6JtxhFeCRSHfp3YeR3g9FvYQvN7ZhhjRaZwBAnDWgDdsF1Qk KAJSSbld4AANgM+vMhBn2wDIbqFz63VgIpHOqYtOKgHhf35WjoSwyle33+QpxoEMJRnJ La/A== X-Gm-Message-State: AOJu0Yx5W6SaYtiWgOowGGoorxOfg/14IvEnVoUW2TVHYLizomqfBgsz EFi9EHku8eh313uGSgM/r9l7cA== X-Received: by 2002:a2e:1451:0:b0:2c5:4a5:9560 with SMTP id 17-20020a2e1451000000b002c504a59560mr502158lju.41.1699918563431; Mon, 13 Nov 2023 15:36:03 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:02 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:00 +0100 Subject: [PATCH net-next v8 5/9] ARM64: dts: marvell: Fix some common switch mistakes MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-5-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Florian Fainelli X-Mailer: b4 0.12.4 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (snail.vger.email [0.0.0.0]); Mon, 13 Nov 2023 15:36:41 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782493945618982210 X-GMAIL-MSGID: 1782493945618982210 Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - ports should be ethernet-ports - port@0 should be ethernet-port@0 - PHYs should be named ethernet-phy@ Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- .../dts/marvell/armada-3720-espressobin-ultra.dts | 14 ++-- .../boot/dts/marvell/armada-3720-espressobin.dtsi | 20 +++-- .../boot/dts/marvell/armada-3720-gl-mv1000.dts | 20 +++-- .../boot/dts/marvell/armada-3720-turris-mox.dts | 85 ++++++++++++---------- .../boot/dts/marvell/armada-7040-mochabin.dts | 24 +++--- .../dts/marvell/armada-8040-clearfog-gt-8k.dts | 22 +++--- arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 42 +++++------ 7 files changed, 115 insertions(+), 112 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index f9abef8dcc94..870bb380a40a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -126,32 +126,32 @@ &switch0 { reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; - ports { - switch0port1: port@1 { + ethernet-ports { + switch0port1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&switch0phy2>; }; - switch0port4: port@4 { + switch0port4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - switch0port5: port@5 { + switch0port5: ethernet-port@5 { reg = <5>; label = "wan"; phy-handle = <&extphy>; @@ -160,7 +160,7 @@ switch0port5: port@5 { }; mdio { - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 5fc613d24151..86ec0df1c676 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -145,19 +145,17 @@ &usb2 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - switch0port0: port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -168,19 +166,19 @@ fixed-link { }; }; - switch0port1: port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -192,13 +190,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index b1b45b4fa9d4..63fbc8352161 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -152,31 +152,29 @@ &uart0 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports: ports { + ports: ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; @@ -185,7 +183,7 @@ port@2 { nvmem-cell-names = "mac-address"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -199,13 +197,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 9eab2bb22134..66cd98b67744 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -304,7 +304,13 @@ phy1: ethernet-phy@1 { reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + * Also do not touch the "ports" or "port@n" nodes. These are also ABI. + */ switch0@10 { compatible = "marvell,mv88e6190"; reg = <0x10>; @@ -317,35 +323,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -430,6 +436,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch0@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -442,19 +449,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -497,6 +504,7 @@ port@5 { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@11 { compatible = "marvell,mv88e6190"; reg = <0x11>; @@ -509,35 +517,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -622,6 +630,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -634,19 +643,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -689,6 +698,7 @@ port@5 { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@12 { compatible = "marvell,mv88e6190"; reg = <0x12>; @@ -701,35 +711,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -805,6 +815,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -817,19 +828,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 48202810bf78..40b7ee7ead72 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -301,10 +301,8 @@ eth2phy: ethernet-phy@1 { }; /* 88E6141 Topaz switch */ - switch: switch@3 { + switch: ethernet-switch@3 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <3>; pinctrl-names = "default"; @@ -314,35 +312,35 @@ switch: switch@3 { interrupt-parent = <&cp0_gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - swport1: port@1 { + swport1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&swphy1>; }; - swport2: port@2 { + swport2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&swphy2>; }; - swport3: port@3 { + swport3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&swphy3>; }; - swport4: port@4 { + swport4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&swphy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp0_eth1>; @@ -355,19 +353,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - swphy1: swphy1@17 { + swphy1: ethernet-phy@17 { reg = <17>; }; - swphy2: swphy2@18 { + swphy2: ethernet-phy@18 { reg = <18>; }; - swphy3: swphy3@19 { + swphy3: ethernet-phy@19 { reg = <19>; }; - swphy4: swphy4@20 { + swphy4: ethernet-phy@20 { reg = <20>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 4125202028c8..67892f0d2863 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -497,42 +497,42 @@ ge_phy: ethernet-phy@0 { reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -545,19 +545,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 32cfb3e2efc3..7538ed56053b 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -207,11 +207,9 @@ phy0: ethernet-phy@0 { reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ switch6: switch0@6 { dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,7 +278,7 @@ port@9 { managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; ethernet = <&cp0_eth0>; phy-mode = "10gbase-r"; @@ -293,35 +291,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; };