[2/4] dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
Commit Message
iMX95 move channel mux register to management page address space. This
prepare to support iMX95.
Add mux_addr in struct fsl_edma_chan. No function change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/dma/fsl-edma-common.c | 6 +++---
drivers/dma/fsl-edma-common.h | 3 +++
drivers/dma/fsl-edma-main.c | 3 +++
3 files changed, 9 insertions(+), 3 deletions(-)
@@ -97,8 +97,8 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
* ch_mux: With the exception of 0, attempts to write a value
* already in use will be forced to 0.
*/
- if (!edma_readl_chreg(fsl_chan, ch_mux))
- edma_writel_chreg(fsl_chan, fsl_chan->srcid, ch_mux);
+ if (!edma_readl(fsl_chan->edma, fsl_chan->mux_addr))
+ edma_writel(fsl_chan->edma, fsl_chan->srcid, fsl_chan->mux_addr);
}
val = edma_readl_chreg(fsl_chan, ch_csr);
@@ -134,7 +134,7 @@ static void fsl_edma3_disable_request(struct fsl_edma_chan *fsl_chan)
flags = fsl_edma_drvflags(fsl_chan);
if (flags & FSL_EDMA_DRV_HAS_CHMUX)
- edma_writel_chreg(fsl_chan, 0, ch_mux);
+ edma_writel(fsl_chan->edma, 0, fsl_chan->mux_addr);
val &= ~EDMA_V3_CH_CSR_ERQ;
edma_writel_chreg(fsl_chan, val, ch_csr);
@@ -145,6 +145,7 @@ struct fsl_edma_chan {
enum dma_data_direction dma_dir;
char chan_name[32];
struct fsl_edma_hw_tcd __iomem *tcd;
+ void __iomem *mux_addr;
u32 real_count;
struct work_struct issue_worker;
struct platform_device *pdev;
@@ -206,6 +207,8 @@ struct fsl_edma_drvdata {
u32 chreg_off;
u32 chreg_space_sz;
u32 flags;
+ u32 mux_off; /* channel mux register offset */
+ u32 mux_skip; /* how much skip for each channel */
int (*setup_irq)(struct platform_device *pdev,
struct fsl_edma_engine *fsl_edma);
};
@@ -356,6 +356,8 @@ static struct fsl_edma_drvdata imx93_data4 = {
.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4,
.chreg_space_sz = 0x8000,
.chreg_off = 0x10000,
+ .mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
+ .mux_skip = 0x8000,
.setup_irq = fsl_edma3_irq_init,
};
@@ -530,6 +532,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
offsetof(struct fsl_edma3_ch_reg, tcd) : 0;
fsl_chan->tcd = fsl_edma->membase
+ i * drvdata->chreg_space_sz + drvdata->chreg_off + len;
+ fsl_chan->mux_addr = fsl_edma->membase + drvdata->mux_off + i * drvdata->mux_skip;
fsl_chan->pdev = pdev;
vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);