[net,v4,3/3] net: ethernet: cortina: Fix MTU max setting
Commit Message
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/net/ethernet/cortina/gemini.c | 17 ++++-------------
drivers/net/ethernet/cortina/gemini.h | 2 +-
2 files changed, 5 insertions(+), 14 deletions(-)
Comments
On Thu, Nov 09, 2023 at 10:03:14AM +0100, Linus Walleij wrote:
> The RX max frame size is over 10000 for the Gemini ethernet,
> but the TX max frame size is actually just 2047 (0x7ff after
> checking the datasheet). Reflect this in what we offer to Linux,
> cap the MTU at the TX max frame minus ethernet headers.
>
> We delete the code disabling the hardware checksum for large
> MTUs as netdev->mtu can no longer be larger than
> netdev->max_mtu meaning the if()-clause in gmac_fix_features()
> is never true.
>
> Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
@@ -2000,15 +2000,6 @@ static int gmac_change_mtu(struct net_device *netdev, int new_mtu)
return 0;
}
-static netdev_features_t gmac_fix_features(struct net_device *netdev,
- netdev_features_t features)
-{
- if (netdev->mtu + ETH_HLEN + VLAN_HLEN > MTU_SIZE_BIT_MASK)
- features &= ~GMAC_OFFLOAD_FEATURES;
-
- return features;
-}
-
static int gmac_set_features(struct net_device *netdev,
netdev_features_t features)
{
@@ -2234,7 +2225,6 @@ static const struct net_device_ops gmac_351x_ops = {
.ndo_set_mac_address = gmac_set_mac_address,
.ndo_get_stats64 = gmac_get_stats64,
.ndo_change_mtu = gmac_change_mtu,
- .ndo_fix_features = gmac_fix_features,
.ndo_set_features = gmac_set_features,
};
@@ -2486,11 +2476,12 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
netdev->hw_features = GMAC_OFFLOAD_FEATURES;
netdev->features |= GMAC_OFFLOAD_FEATURES | NETIF_F_GRO;
- /* We can handle jumbo frames up to 10236 bytes so, let's accept
- * payloads of 10236 bytes minus VLAN and ethernet header
+ /* We can receive jumbo frames up to 10236 bytes but only
+ * transmit 2047 bytes so, let's accept payloads of 2047
+ * bytes minus VLAN and ethernet header
*/
netdev->min_mtu = ETH_MIN_MTU;
- netdev->max_mtu = 10236 - VLAN_ETH_HLEN;
+ netdev->max_mtu = MTU_SIZE_BIT_MASK - VLAN_ETH_HLEN;
port->freeq_refill = 0;
netif_napi_add(netdev, &port->napi, gmac_napi_poll);
@@ -502,7 +502,7 @@ union gmac_txdesc_3 {
#define SOF_BIT 0x80000000
#define EOF_BIT 0x40000000
#define EOFIE_BIT BIT(29)
-#define MTU_SIZE_BIT_MASK 0x1fff
+#define MTU_SIZE_BIT_MASK 0x7ff /* Max MTU 2047 bytes */
/* GMAC Tx Descriptor */
struct gmac_txdesc {