@@ -1577,6 +1577,13 @@ F: Documentation/process/maintainer-soc*.rst
F: arch/arm/boot/dts/Makefile
F: arch/arm64/boot/dts/Makefile
+ARM64 FIT SUPPORT
+M: Simon Glass <sjg@chromium.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm64/boot/Makefile
+F: scripts/make_fit.py
+
ARM ARCHITECTED TIMER DRIVER
M: Mark Rutland <mark.rutland@arm.com>
M: Marc Zyngier <maz@kernel.org>
@@ -150,7 +150,7 @@ libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
-BOOT_TARGETS := Image.gz vmlinuz.efi
+BOOT_TARGETS := Image.gz vmlinuz.efi image.fit
PHONY += $(BOOT_TARGETS)
@@ -215,6 +215,7 @@ virtconfig:
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+ echo ' image.fit - Flat Image Tree (arch/$(ARCH)/boot/image.fit)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
@@ -2,3 +2,4 @@
Image
Image.gz
vmlinuz*
+image.fit
@@ -16,7 +16,8 @@
OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
-targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo \
+ Image.zst image.fit
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
@@ -39,6 +40,9 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
$(obj)/Image.zst: $(obj)/Image FORCE
$(call if_changed,zstd)
+$(obj)/image.fit: $(obj)/Image FORCE
+ $(call cmd,fit)
+
EFI_ZBOOT_PAYLOAD := Image
EFI_ZBOOT_BFD_TARGET := elf64-littleaarch64
EFI_ZBOOT_MACH_TYPE := ARM64
@@ -496,6 +496,22 @@ quiet_cmd_uimage = UIMAGE $@
-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
-n $(UIMAGE_NAME) -d $< $@
+# Flat Image Tree (FIT)
+# This allows for packaging of a kernel and all devicetrees files, using
+# compression.
+# ---------------------------------------------------------------------------
+
+MAKE_FIT := $(srctree)/scripts/make_fit.py
+
+quiet_cmd_fit = FIT $@
+ cmd_fit = $(MAKE_FIT) -f $@ --arch $(UIMAGE_ARCH) --os linux \
+ --name $(UIMAGE_NAME) \
+ --compress $(UIMAGE_COMPRESSION) -k $< \
+ $(dir $<)/dts
+
+$(obj)/%.fit: $(obj)/%.itk $(MAKE_FIT) FORCE
+ $(call if_changed,fit,gzip)
+
# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
new file mode 100755
@@ -0,0 +1,289 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2023 Google LLC
+# Written by Simon Glass <sjg@chromium.org>
+#
+
+"""Build a FIT containing a lot of devicetree files
+
+Usage:
+ make_fit.py -A arm64 -n 'Linux-6.6' -O linux
+ -f arch/arm64/boot/image.fit -k /tmp/kern/arch/arm64/boot/image.itk
+ /tmp/kern/arch/arm64/boot/dts/ -E -c gzip
+
+Creates a FIT containing the supplied kernel and a directory containing the
+devicetree files.
+
+Use -E to generate an external FIT (where the data is placed after the
+FIT data structure). This allows parsing of the data without loading
+the entire FIT.
+
+Use -c to compress the data, using bzip2, gzip, lz4, lzma, lzo and
+zstd
+
+The resulting FIT can be booted by bootloaders which support FIT, such
+as U-Boot, Linuxboot, Tianocore, etc.
+
+Note that this tool does not yet support adding a ramdisk / initrd.
+"""
+
+import argparse
+import collections
+import os
+import subprocess
+import sys
+import tempfile
+import time
+
+import libfdt
+
+
+# Tool extension and the name of the command-line tools
+CompTool = collections.namedtuple('CompTool', 'ext,tools')
+
+COMP_TOOLS = {
+ 'bzip2': CompTool('.bz2', 'bzip2'),
+ 'gzip': CompTool('.gz', 'pigz,gzip'),
+ 'lz4': CompTool('.lz4', 'lz4'),
+ 'lzma': CompTool('.lzma', 'lzma'),
+ 'lzo': CompTool('.lzo', 'lzop'),
+ 'zstd': CompTool('.zstd', 'zstd'),
+}
+
+def parse_args():
+ """Parse the program ArgumentParser
+
+ Returns:
+ Namespace object containing the arguments
+ """
+ epilog = 'Build a FIT from a directory tree containing .dtb files'
+ parser = argparse.ArgumentParser(epilog=epilog)
+ parser.add_argument('-A', '--arch', type=str, required=True,
+ help='Specifies the architecture')
+ parser.add_argument('-c', '--compress', type=str, default='none',
+ help='Specifies the compression')
+ parser.add_argument('-E', '--external', action='store_true',
+ help='Convert the FIT to use external data')
+ parser.add_argument('-n', '--name', type=str, required=True,
+ help='Specifies the name')
+ parser.add_argument('-O', '--os', type=str, required=True,
+ help='Specifies the operating system')
+ parser.add_argument('-f', '--fit', type=str, required=True,
+ help='Specifies the output file (.fit)')
+ parser.add_argument('-k', '--kernel', type=str, required=True,
+ help='Specifies the (uncompressed) kernel input file (.itk)')
+ parser.add_argument('srcdir', type=str, nargs='*',
+ help='Specifies the directory tree that contains .dtb files')
+
+ return parser.parse_args()
+
+def setup_fit(fsw, name):
+ """Make a start on writing the FIT
+
+ Outputs the root properties and the 'images' node
+
+ Args:
+ fsw (libfdt.FdtSw): Object to use for writing
+ name (str): Name of kernel image
+ """
+ fsw.INC_SIZE = 65536
+ fsw.finish_reservemap()
+ fsw.begin_node('')
+ fsw.property_string('description', f'{name} with devicetree set')
+ fsw.property_u32('#address-cells', 1)
+
+ fsw.property_u32('timestamp', int(time.time()))
+ fsw.begin_node('images')
+
+
+def write_kernel(fsw, data, args):
+ """Write out the kernel image
+
+ Writes a kernel node along with the required properties
+
+ Args:
+ fsw (libfdt.FdtSw): Object to use for writing
+ data (bytes): Data to write (possibly compressed)
+ args (Namespace): Contains necessary strings:
+ arch: FIT architecture, e.g. 'arm64'
+ fit_os: Operating Systems, e.g. 'linux'
+ name: Name of OS, e.g. 'Linux-6.6.0-rc7'
+ compress: Compression algorithm to use, e.g. 'gzip'
+ """
+ with fsw.add_node('kernel'):
+ fsw.property_string('description', args.name)
+ fsw.property_string('type', 'kernel_noload')
+ fsw.property_string('arch', args.arch)
+ fsw.property_string('os', args.os)
+ fsw.property_string('compression', args.compress)
+ fsw.property('data', data)
+ fsw.property_u32('load', 0)
+ fsw.property_u32('entry', 0)
+
+
+def finish_fit(fsw, entries):
+ """Finish the FIT ready for use
+
+ Writes the /configurations node and subnodes
+
+ Args:
+ fsw (libfdt.FdtSw): Object to use for writing
+ entries (list of tuple): List of configurations:
+ str: Description of model
+ str: Compatible stringlist
+ """
+ fsw.end_node()
+ seq = 0
+ with fsw.add_node('configurations'):
+ for model, compat in entries:
+ seq += 1
+ with fsw.add_node(f'conf-{seq}'):
+ fsw.property('compatible', bytes(compat))
+ fsw.property_string('description', model)
+ fsw.property_string('fdt', f'fdt-{seq}')
+ fsw.property_string('kernel', 'kernel')
+ fsw.end_node()
+
+
+def compress_data(inf, compress):
+ """Compress data using a selected algorithm
+
+ Args:
+ inf (IOBase): Filename containing the data to compress
+ compress (str): Compression algorithm, e.g. 'gzip'
+
+ Return:
+ bytes: Compressed data
+ """
+ if compress == 'none':
+ return inf.read()
+
+ comp = COMP_TOOLS.get(compress)
+ if not comp:
+ raise ValueError(f"Unknown compression algorithm '{compress}'")
+
+ with tempfile.NamedTemporaryFile() as comp_fname:
+ with open(comp_fname.name, 'wb') as outf:
+ done = False
+ for tool in comp.tools.split(','):
+ try:
+ subprocess.call([tool, '-c'], stdin=inf, stdout=outf)
+ done = True
+ break
+ except FileNotFoundError:
+ pass
+ if not done:
+ raise ValueError(f'Missing tool(s): {comp.tools}\n')
+ with open(comp_fname.name, 'rb') as compf:
+ comp_data = compf.read()
+ return comp_data
+
+
+def output_dtb(fsw, seq, fname, arch, compress):
+ """Write out a single devicetree to the FIT
+
+ Args:
+ fsw (libfdt.FdtSw): Object to use for writing
+ seq (int): Sequence number (1 for first)
+ fmame (str): Filename containing the DTB
+ arch: FIT architecture, e.g. 'arm64'
+ compress (str): Compressed algorithm, e.g. 'gzip'
+
+ Returns:
+ tuple:
+ str: Model name
+ bytes: Compatible stringlist
+ """
+ with fsw.add_node(f'fdt-{seq}'):
+ # Get the compatible / model information
+ with open(fname, 'rb') as inf:
+ data = inf.read()
+ fdt = libfdt.FdtRo(data)
+ model = fdt.getprop(0, 'model').as_str()
+ compat = fdt.getprop(0, 'compatible')
+
+ fsw.property_string('description', model)
+ fsw.property_string('type', 'flat_dt')
+ fsw.property_string('arch', arch)
+ fsw.property_string('compression', compress)
+ fsw.property('compatible', bytes(compat))
+
+ with open(fname, 'rb') as inf:
+ compressed = compress_data(inf, compress)
+ fsw.property('data', compressed)
+ return model, compat
+
+
+def build_fit(args):
+ """Build the FIT from the provided files and arguments
+
+ Args:
+ args (Namespace): Program arguments
+
+ Returns:
+ tuple:
+ bytes: FIT data
+ int: Number of configurations generated
+ size: Total uncompressed size of data
+ """
+ fsw = libfdt.FdtSw()
+ setup_fit(fsw, args.name)
+ seq = 0
+ size = 0
+ entries = []
+
+ # Handle the kernel
+ with open(args.kernel, 'rb') as inf:
+ comp_data = compress_data(inf, args.compress)
+ size += os.path.getsize(args.kernel)
+ write_kernel(fsw, comp_data, args)
+
+ for path in args.srcdir:
+ # Handle devicetree files
+ if os.path.isdir(path):
+ for dirpath, _, fnames in os.walk(path):
+ for fname in fnames:
+ if os.path.splitext(fname)[1] != '.dtb':
+ continue
+ pathname = os.path.join(dirpath, fname)
+ seq += 1
+ size += os.path.getsize(pathname)
+ model, compat = output_dtb(fsw, seq, pathname,
+ args.arch, args.compress)
+ entries.append([model, compat])
+
+ finish_fit(fsw, entries)
+
+ # Include the kernel itself in the returned file count
+ return fsw.as_fdt().as_bytearray(), seq + 1, size
+
+
+def run_make_fit():
+ """Run the tool's main logic"""
+ args = parse_args()
+
+ out_data, count, size = build_fit(args)
+ with open(args.fit, 'wb') as outf:
+ outf.write(out_data)
+
+ ext_fit_size = None
+ if args.external:
+ mkimage = os.environ.get('MKIMAGE', 'mkimage')
+ subprocess.check_call([mkimage, '-E', '-F', args.fit],
+ stdout=subprocess.DEVNULL)
+
+ with open(args.fit, 'rb') as inf:
+ data = inf.read()
+ ext_fit = libfdt.FdtRo(data)
+ ext_fit_size = ext_fit.totalsize()
+
+ comp_size = len(out_data)
+ print(f'FIT size {comp_size:#x}/{comp_size / 1024 / 1024:.1f} MB', end='')
+ if ext_fit_size:
+ print(f', header {ext_fit_size:#x}/{ext_fit_size / 1024:.1f} KB', end='')
+ print(f', {count} files, uncompressed {size / 1024 / 1024:.1f} MB')
+
+
+if __name__ == "__main__":
+ sys.exit(run_make_fit())