[RESEND] arm64: dts: VIM3: Set the rates of the clocks for the NPU

Message ID 20231106092202.11127-1-tomeu@tomeuvizoso.net
State New
Headers
Series [RESEND] arm64: dts: VIM3: Set the rates of the clocks for the NPU |

Commit Message

Tomeu Vizoso Nov. 6, 2023, 9:22 a.m. UTC
  Otherwise they are left at 24MHz and the NPU runs very slowly.

Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
 1 file changed, 3 insertions(+)
  

Comments

Neil Armstrong Nov. 6, 2023, 9:26 a.m. UTC | #1
On 06/11/2023 10:22, Tomeu Vizoso wrote:
> Otherwise they are left at 24MHz and the NPU runs very slowly.
> 
> Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
> Suggested-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index ff68b911b729..9d5eab6595d0 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -2502,6 +2502,9 @@ npu: npu@ff100000 {
>   		clocks = <&clkc CLKID_NNA_CORE_CLK>,
>   			 <&clkc CLKID_NNA_AXI_CLK>;
>   		clock-names = "core", "bus";
> +		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
> +				  <&clkc CLKID_NNA_AXI_CLK>;
> +		assigned-clock-rates = <800000000>, <800000000>;
>   		resets = <&reset RESET_NNA>;
>   		status = "disabled";
>   	};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
  
Jerome Brunet Nov. 6, 2023, 10:41 a.m. UTC | #2
On Mon 06 Nov 2023 at 10:26, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> On 06/11/2023 10:22, Tomeu Vizoso wrote:

patch title is misleading. It does not target the vim3 only but all g12
and sm1 HWs.

It should start with "arm64: dts: amlogic: g12: " instead

>> Otherwise they are left at 24MHz and the NPU runs very slowly.
>> Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
>> Suggested-by: Lucas Stach <l.stach@pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
>>   1 file changed, 3 insertions(+)
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> index ff68b911b729..9d5eab6595d0 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> @@ -2502,6 +2502,9 @@ npu: npu@ff100000 {
>>   		clocks = <&clkc CLKID_NNA_CORE_CLK>,
>>   			 <&clkc CLKID_NNA_AXI_CLK>;
>>   		clock-names = "core", "bus";
>> +		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
>> +				  <&clkc CLKID_NNA_AXI_CLK>;
>> +		assigned-clock-rates = <800000000>, <800000000>;
>>   		resets = <&reset RESET_NNA>;
>>   		status = "disabled";
>>   	};
>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
  
Tomeu Vizoso Jan. 10, 2024, 3:40 p.m. UTC | #3
On Mon, Nov 6, 2023 at 11:43 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
>
> On Mon 06 Nov 2023 at 10:26, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> > On 06/11/2023 10:22, Tomeu Vizoso wrote:
>
> patch title is misleading. It does not target the vim3 only but all g12
> and sm1 HWs.
>
> It should start with "arm64: dts: amlogic: g12: " instead

Thanks, have fixed and resent.

Cheers,

Tomeu

> >> Otherwise they are left at 24MHz and the NPU runs very slowly.
> >> Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
> >> Suggested-by: Lucas Stach <l.stach@pengutronix.de>
> >> ---
> >>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
> >>   1 file changed, 3 insertions(+)
> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> >> b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> >> index ff68b911b729..9d5eab6595d0 100644
> >> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> >> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> >> @@ -2502,6 +2502,9 @@ npu: npu@ff100000 {
> >>              clocks = <&clkc CLKID_NNA_CORE_CLK>,
> >>                       <&clkc CLKID_NNA_AXI_CLK>;
> >>              clock-names = "core", "bus";
> >> +            assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
> >> +                              <&clkc CLKID_NNA_AXI_CLK>;
> >> +            assigned-clock-rates = <800000000>, <800000000>;
> >>              resets = <&reset RESET_NNA>;
> >>              status = "disabled";
> >>      };
> >
> > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
>
  

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index ff68b911b729..9d5eab6595d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2502,6 +2502,9 @@  npu: npu@ff100000 {
 		clocks = <&clkc CLKID_NNA_CORE_CLK>,
 			 <&clkc CLKID_NNA_AXI_CLK>;
 		clock-names = "core", "bus";
+		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
+				  <&clkc CLKID_NNA_AXI_CLK>;
+		assigned-clock-rates = <800000000>, <800000000>;
 		resets = <&reset RESET_NNA>;
 		status = "disabled";
 	};