diff mbox series

[v2,2/5] spi: stm32: use callbacks for read_rx and write_tx

Message ID 20231102193722.3042245-3-ben.wolsieffer@hefring.com
State New
Headers
Series Add STM32F7 SPI support |

Commit Message

Ben Wolsieffer Nov. 2, 2023, 7:37 p.m. UTC 
  The STM32F7 will require different read and write routines, so make
these functions into configurable callbacks.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
---
 drivers/spi/spi-stm32.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 02d1409d7229..427788d18532 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -229,6 +229,8 @@  struct stm32_spi;
  * time between frames (if driver has this functionality)
  * @set_number_of_data: optional routine to configure registers to desired
  * number of data (if driver has this functionality)
+ * @write_tx: routine to write to transmit register/FIFO
+ * @read_rx: routine to read from receive register/FIFO
  * @transfer_one_dma_start: routine to start transfer a single spi_transfer
  * using DMA
  * @dma_rx_cb: routine to call after DMA RX channel operation is complete
@@ -252,6 +254,8 @@  struct stm32_spi_cfg {
 	int (*set_mode)(struct stm32_spi *spi, unsigned int comm_type);
 	void (*set_data_idleness)(struct stm32_spi *spi, u32 length);
 	int (*set_number_of_data)(struct stm32_spi *spi, u32 length);
+	void (*write_tx)(struct stm32_spi *spi);
+	void (*read_rx)(struct stm32_spi *spi);
 	void (*transfer_one_dma_start)(struct stm32_spi *spi);
 	void (*dma_rx_cb)(void *data);
 	void (*dma_tx_cb)(void *data);
@@ -822,17 +826,17 @@  static irqreturn_t stm32fx_spi_irq_event(int irq, void *dev_id)
 
 	if (sr & STM32FX_SPI_SR_TXE) {
 		if (spi->tx_buf)
-			stm32f4_spi_write_tx(spi);
+			spi->cfg->write_tx(spi);
 		if (spi->tx_len == 0)
 			end = true;
 	}
 
 	if (sr & STM32FX_SPI_SR_RXNE) {
-		stm32f4_spi_read_rx(spi);
+		spi->cfg->read_rx(spi);
 		if (spi->rx_len == 0)
 			end = true;
 		else if (spi->tx_buf)/* Load data for discontinuous mode */
-			stm32f4_spi_write_tx(spi);
+			spi->cfg->write_tx(spi);
 	}
 
 end_irq:
@@ -1149,7 +1153,7 @@  static int stm32fx_spi_transfer_one_irq(struct stm32_spi *spi)
 
 	/* starting data transfer when buffer is loaded */
 	if (spi->tx_buf)
-		stm32f4_spi_write_tx(spi);
+		spi->cfg->write_tx(spi);
 
 	spin_unlock_irqrestore(&spi->lock, flags);
 
@@ -1752,6 +1756,8 @@  static const struct stm32_spi_cfg stm32f4_spi_cfg = {
 	.config = stm32fx_spi_config,
 	.set_bpw = stm32f4_spi_set_bpw,
 	.set_mode = stm32fx_spi_set_mode,
+	.write_tx = stm32f4_spi_write_tx,
+	.read_rx = stm32f4_spi_read_rx,
 	.transfer_one_dma_start = stm32fx_spi_transfer_one_dma_start,
 	.dma_tx_cb = stm32fx_spi_dma_tx_cb,
 	.dma_rx_cb = stm32_spi_dma_rx_cb,
@@ -1775,6 +1781,8 @@  static const struct stm32_spi_cfg stm32h7_spi_cfg = {
 	.set_mode = stm32h7_spi_set_mode,
 	.set_data_idleness = stm32h7_spi_data_idleness,
 	.set_number_of_data = stm32h7_spi_number_of_data,
+	.write_tx = stm32h7_spi_write_txfifo,
+	.read_rx = stm32h7_spi_read_rxfifo,
 	.transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start,
 	.dma_rx_cb = stm32_spi_dma_rx_cb,
 	/*