[5/5] ARM: dts: stm32: add SPI support on STM32F746
Commit Message
Add device tree nodes for the STM32F746 SPI controllers.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
---
arch/arm/boot/dts/st/stm32f746.dtsi | 60 +++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
@@ -281,6 +281,26 @@ gcan3: gcan@40003600 {
clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
};
+ spi2: spi@40003800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+ status = "disabled";
+ };
+
+ spi3: spi@40003c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003c00 0x400>;
+ interrupts = <51>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+ status = "disabled";
+ };
+
usart2: serial@40004400 {
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
@@ -498,6 +518,26 @@ sdio1: mmc@40012c00 {
status = "disabled";
};
+ spi1: spi@40013000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013000 0x400>;
+ interrupts = <35>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+ status = "disabled";
+ };
+
+ spi4: spi@40013400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013400 0x400>;
+ interrupts = <84>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+ status = "disabled";
+ };
+
syscfg: syscon@40013800 {
compatible = "st,stm32-syscfg", "syscon";
reg = <0x40013800 0x400>;
@@ -562,6 +602,26 @@ pwm {
};
};
+ spi5: spi@40015000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015000 0x400>;
+ interrupts = <85>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+ status = "disabled";
+ };
+
+ spi6: spi@40015400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015400 0x400>;
+ interrupts = <86>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+ status = "disabled";
+ };
+
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;