From patchwork Tue Oct 31 14:00:55 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Stefan Hansson X-Patchwork-Id: 160124 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b90f:0:b0:403:3b70:6f57 with SMTP id t15csp265537vqg; Tue, 31 Oct 2023 07:07:13 -0700 (PDT) X-Google-Smtp-Source: AGHT+IGhq3SPjiEHRvi2g0FTKKSHNr91falWt+X5HrBWO2WzU3TJy/7D70v32N/U9HyQt/Br7Idx X-Received: by 2002:aa7:800f:0:b0:6c2:cb9a:885a with SMTP id j15-20020aa7800f000000b006c2cb9a885amr662982pfi.27.1698761233374; Tue, 31 Oct 2023 07:07:13 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698761233; cv=none; d=google.com; s=arc-20160816; b=wVqmLkV+wH6jJxuDPtpcXBSEuTqkYNI8OdvgIkZeyxT5AqjyDHmzoaqBmHuNTvJFbD ukWb8IWlBYhnpbYYJsJh7CFETI26rWlkr8viHtOx9fc67Rr6J8s83foGYylBy+nA2NRt eKmjeDVjkgaBp8btMJ+/J+XPYvSSaZp2iEI4TJk+bstDIjuNrJs1pFfwXNCizG0/A7UV I71Ae3t4Do4ev0G+aogF1+qm8xYV0FGUWRl5i2fckVtEdKBtL1/P8dyD4muWbblUcvmM rslaaqEvZsY1zS5LRb+53TTmvaUYZKGq8ymyqFdDBwEP65BGz1pbb60Sjolq1tNm6zud LNhA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:dkim-signature :from; bh=h8lX2KVEOOo3u5HB13e3nAtKvq2daRrsr3KNacxVaZY=; fh=uJUhTSxneiz5HBhT+XerpF8OXAQU9Sss+CN9zGtDobg=; b=e2o5Datr933QVuSt+yW/8NovID5FhDkTqUVfDf5k4Uc1g0jz576puRaqPCzvr3gKzG 0XjPU2VU8Is0fbU4882snlaHhFSW3HQAPL4rMcLdo1KJ83RPpiMS3WzH0sga5651BCB8 obWu7+Cq3RuP3PUboq19wkr6fEP67jOWSmGaZrDUXaz5vmfORV3GUIrFscWKSs7QG968 jCTSZCO8o+qed6HITOum+WFr04ruzLrltZxccyrN1NVg3/5auObSywWR11yqDY+56r6K b8vgqISHN6C5gGi1GQY0cY7OGqQTixa+ZP8CPDP2K3Z0m2cBiiaMDls5Q0QThOsLlrtq GUEg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@postmarketos.org header.s=donut header.b=mYOKyia8; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from howler.vger.email (howler.vger.email. [23.128.96.34]) by mx.google.com with ESMTPS id y11-20020aa78f2b000000b006be036f04dasi1040053pfr.225.2023.10.31.07.07.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 31 Oct 2023 07:07:13 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34; Authentication-Results: mx.google.com; dkim=pass header.i=@postmarketos.org header.s=donut header.b=mYOKyia8; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by howler.vger.email (Postfix) with ESMTP id 2EED28030D2D; Tue, 31 Oct 2023 07:07:09 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at howler.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232429AbjJaOG3 (ORCPT + 33 others); Tue, 31 Oct 2023 10:06:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35704 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232223AbjJaOFv (ORCPT ); Tue, 31 Oct 2023 10:05:51 -0400 Received: from proxmox1.postmarketos.org (proxmox1.postmarketos.org [IPv6:2a01:4f8:a0:821d::2]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 25044103; Tue, 31 Oct 2023 07:05:45 -0700 (PDT) From: Stefan Hansson DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=postmarketos.org; s=donut; t=1698761144; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=h8lX2KVEOOo3u5HB13e3nAtKvq2daRrsr3KNacxVaZY=; b=mYOKyia8Te6C5qanY+26vc1DqUY36msdzzou1f1ZwxIVs/MBH4UDnE+EQmTz9MFVlATqvS jwnFATTzyE0WwRkbD9wqc6f6PYKX7CsdJhY5bWtey9t9N/c2ULdBSDx4oXNsV2rzE86S12 n1G7ryyUlcJ8BO/ZZpZFC+rsbTVsDcU= To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Stefan Hansson , Krzysztof Kozlowski Subject: [PATCH v5 1/4] ARM: dts: qcom: samsung-matisse-common: Add initial common device tree Date: Tue, 31 Oct 2023 15:00:55 +0100 Message-ID: <20231031140337.49291-2-newbyte@postmarketos.org> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20231031140337.49291-1-newbyte@postmarketos.org> References: <20231031140337.49291-1-newbyte@postmarketos.org> MIME-Version: 1.0 X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on howler.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (howler.vger.email [0.0.0.0]); Tue, 31 Oct 2023 07:07:09 -0700 (PDT) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1781280258745276583 X-GMAIL-MSGID: 1781280258745276583 According to the dts from the kernel source code released by Samsung, matissewifi and matisselte only have minor differences in hardware, so use a shared dtsi to reduce duplicated code. Additionally, this should make adding support for matisse3g easier should someone want to do that at a later point. As such, add a common device tree for all matisse devices by Samsung based on the matissewifi dts. Support for matisselte will be introduced in a later patch in this series and will use the common dtsi as well. Signed-off-by: Stefan Hansson Reviewed-by: Krzysztof Kozlowski --- .../qcom-apq8026-samsung-matisse-wifi.dts | 595 +++--------------- ... qcom-msm8226-samsung-matisse-common.dtsi} | 66 -- 2 files changed, 76 insertions(+), 585 deletions(-) rewrite arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts (85%) copy arch/arm/boot/dts/qcom/{qcom-apq8026-samsung-matisse-wifi.dts => qcom-msm8226-samsung-matisse-common.dtsi} (86%) diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts dissimilarity index 85% index f516e0426bb9..b0da51f67539 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts @@ -1,519 +1,76 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2022, Matti Lehtimäki - */ - -/dts-v1/; - -#include -#include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" - -/delete-node/ &adsp_region; -/delete-node/ &smem_region; - -/ { - model = "Samsung Galaxy Tab 4 10.1"; - compatible = "samsung,matisse-wifi", "qcom,apq8026"; - chassis-type = "tablet"; - - aliases { - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - display0 = &framebuffer0; - }; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - stdout-path = "display0"; - - framebuffer0: framebuffer@3200000 { - compatible = "simple-framebuffer"; - reg = <0x03200000 0x800000>; - width = <1280>; - height = <800>; - stride = <(1280 * 3)>; - format = "r8g8b8"; - }; - }; - - gpio-hall-sensor { - compatible = "gpio-keys"; - - event-hall-sensor { - label = "Hall Effect Sensor"; - gpios = <&tlmm 110 GPIO_ACTIVE_LOW>; - linux,input-type = ; - linux,code = ; - debounce-interval = <15>; - linux,can-disable; - wakeup-source; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - key-home { - label = "Home"; - gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <15>; - }; - - key-volume-down { - label = "Volume Down"; - gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <15>; - }; - - key-volume-up { - label = "Volume Up"; - gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <15>; - }; - }; - - i2c-backlight { - compatible = "i2c-gpio"; - sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - - pinctrl-0 = <&backlight_i2c_default_state>; - pinctrl-names = "default"; - - i2c-gpio,delay-us = <4>; - - #address-cells = <1>; - #size-cells = <0>; - - backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - - dev-ctrl = /bits/ 8 <0x80>; - init-brt = /bits/ 8 <0x3f>; - - pwms = <&backlight_pwm 0 100000>; - pwm-names = "lp8556"; - - rom-a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0x44>; - }; - - rom-a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x6c>; - }; - - rom-a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x24>; - }; - }; - }; - - backlight_pwm: pwm { - compatible = "clk-pwm"; - #pwm-cells = <2>; - clocks = <&mmcc CAMSS_GP0_CLK>; - pinctrl-0 = <&backlight_pwm_default_state>; - pinctrl-names = "default"; - }; - - reg_tsp_1p8v: regulator-tsp-1p8v { - compatible = "regulator-fixed"; - regulator-name = "tsp_1p8v"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&tsp_en_default_state>; - }; - - reg_tsp_3p3v: regulator-tsp-3p3v { - compatible = "regulator-fixed"; - regulator-name = "tsp_3p3v"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&tsp_en1_default_state>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@3200000 { - reg = <0x03200000 0x800000>; - no-map; - }; - - mpss@8400000 { - reg = <0x08400000 0x1f00000>; - no-map; - }; - - mba@a300000 { - reg = <0x0a300000 0x100000>; - no-map; - }; - - reserved@cb00000 { - reg = <0x0cb00000 0x700000>; - no-map; - }; - - wcnss@d200000 { - reg = <0x0d200000 0x700000>; - no-map; - }; - - adsp_region: adsp@d900000 { - reg = <0x0d900000 0x1800000>; - no-map; - }; - - venus@f100000 { - reg = <0x0f100000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0x0fa00000 0x100000>; - no-map; - }; - - reserved@fb00000 { - reg = <0x0fb00000 0x260000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; - }; - - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; - }; - }; -}; - -&adsp { - status = "okay"; -}; - -&blsp1_i2c2 { - status = "okay"; - - accelerometer@1d { - compatible = "st,lis2hh12"; - reg = <0x1d>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&accel_int_default_state>; - - st,drdy-int-pin = <1>; - - vdd-supply = <&pm8226_l19>; - vddio-supply = <&pm8226_lvs1>; - }; -}; - -&blsp1_i2c4 { - status = "okay"; - - muic: usb-switch@25 { - compatible = "siliconmitus,sm5502-muic"; - reg = <0x25>; - - interrupt-parent = <&tlmm>; - interrupts = <67 IRQ_TYPE_EDGE_FALLING>; - - pinctrl-names = "default"; - pinctrl-0 = <&muic_int_default_state>; - }; -}; - -&blsp1_i2c5 { - status = "okay"; - - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - - interrupt-parent = <&tlmm>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&tsp_int_rst_default_state>; - - reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; - - vdd-supply = <®_tsp_1p8v>; - vdda-supply = <®_tsp_3p3v>; - }; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-pm8226-regulators"; - - pm8226_s3: s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - pm8226_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8226_s5: s5 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - - pm8226_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pm8226_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8226_l3: l3 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1337500>; - regulator-always-on; - }; - - pm8226_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8226_l5: l5 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8226_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pm8226_l7: l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - pm8226_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pm8226_l9: l9 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8226_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8226_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8226_l14: l14 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <2750000>; - }; - - pm8226_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8226_l16: l16 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3350000>; - }; - - pm8226_l17: l17 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-system-load = <200000>; - regulator-allow-set-load; - regulator-always-on; - }; - - pm8226_l18: l18 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - pm8226_l19: l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3000000>; - }; - - pm8226_l20: l20 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pm8226_l21: l21 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8226_l22: l22 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - - pm8226_l23: l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8226_l24: l24 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - pm8226_l25: l25 { - regulator-min-microvolt = <1775000>; - regulator-max-microvolt = <2125000>; - }; - - pm8226_l26: l26 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1300000>; - }; - - pm8226_l27: l27 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8226_l28: l28 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8226_lvs1: lvs1 {}; - }; -}; - -&sdhc_1 { - vmmc-supply = <&pm8226_l17>; - vqmmc-supply = <&pm8226_l6>; - - bus-width = <8>; - non-removable; - - status = "okay"; -}; - -&sdhc_2 { - vmmc-supply = <&pm8226_l18>; - vqmmc-supply = <&pm8226_l21>; - - bus-width = <4>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - - status = "okay"; -}; - -&tlmm { - accel_int_default_state: accel-int-default-state { - pins = "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - backlight_i2c_default_state: backlight-i2c-default-state { - pins = "gpio20", "gpio21"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - backlight_pwm_default_state: backlight-pwm-default-state { - pins = "gpio33"; - function = "gp0_clk"; - }; - - muic_int_default_state: muic-int-default-state { - pins = "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tsp_en_default_state: tsp-en-default-state { - pins = "gpio31"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tsp_en1_default_state: tsp-en1-default-state { - pins = "gpio73"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tsp_int_rst_default_state: tsp-int-rst-default-state { - pins = "gpio17"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; -}; - -&usb { - extcon = <&muic>, <&muic>; - status = "okay"; -}; - -&usb_hs_phy { - extcon = <&muic>; - v1p8-supply = <&pm8226_l10>; - v3p3-supply = <&pm8226_l20>; -}; +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki + */ + +/dts-v1/; + +#include "qcom-msm8226-samsung-matisse-common.dtsi" + +/ { + model = "Samsung Galaxy Tab 4 10.1"; + compatible = "samsung,matisse-wifi", "qcom,apq8026"; + chassis-type = "tablet"; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default_state>; + + st,drdy-int-pin = <1>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default_state>; + + reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + }; +}; + +&tlmm { + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi similarity index 86% copy from arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts copy to arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi index f516e0426bb9..ef98d88927ca 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi @@ -3,8 +3,6 @@ * Copyright (c) 2022, Matti Lehtimäki */ -/dts-v1/; - #include #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" @@ -13,10 +11,6 @@ /delete-node/ &smem_region; / { - model = "Samsung Galaxy Tab 4 10.1"; - compatible = "samsung,matisse-wifi", "qcom,apq8026"; - chassis-type = "tablet"; - aliases { mmc0 = &sdhc_1; /* SDC1 eMMC slot */ mmc1 = &sdhc_2; /* SDC2 SD card slot */ @@ -141,19 +135,6 @@ reg_tsp_1p8v: regulator-tsp-1p8v { pinctrl-0 = <&tsp_en_default_state>; }; - reg_tsp_3p3v: regulator-tsp-3p3v { - compatible = "regulator-fixed"; - regulator-name = "tsp_3p3v"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&tsp_en1_default_state>; - }; - reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -223,26 +204,6 @@ &adsp { status = "okay"; }; -&blsp1_i2c2 { - status = "okay"; - - accelerometer@1d { - compatible = "st,lis2hh12"; - reg = <0x1d>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&accel_int_default_state>; - - st,drdy-int-pin = <1>; - - vdd-supply = <&pm8226_l19>; - vddio-supply = <&pm8226_lvs1>; - }; -}; - &blsp1_i2c4 { status = "okay"; @@ -258,26 +219,6 @@ muic: usb-switch@25 { }; }; -&blsp1_i2c5 { - status = "okay"; - - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - - interrupt-parent = <&tlmm>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&tsp_int_rst_default_state>; - - reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; - - vdd-supply = <®_tsp_1p8v>; - vdda-supply = <®_tsp_3p3v>; - }; -}; - &rpm_requests { regulators { compatible = "qcom,rpm-pm8226-regulators"; @@ -492,13 +433,6 @@ tsp_en_default_state: tsp-en-default-state { bias-disable; }; - tsp_en1_default_state: tsp-en1-default-state { - pins = "gpio73"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - tsp_int_rst_default_state: tsp-int-rst-default-state { pins = "gpio17"; function = "gpio";