diff mbox series

[6/9] arm64: dts: qcom: sc7280: Add ADSP node

Message ID 20231027-sc7280-remoteprocs-v1-6-05ce95d9315a@fairphone.com
State New
Headers
Series Remoteprocs (ADSP, CDSP, WPSS) for SC7280 |

Commit Message

Luca Weiss Oct. 27, 2023, 2:20 p.m. UTC 
  Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 69 ++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

Comments

Krzysztof Kozlowski Oct. 28, 2023, 8:05 a.m. UTC | #1 
On 27/10/2023 16:20, Luca Weiss wrote:
> Add the node for the ADSP found on the SC7280 SoC, using standard
> Qualcomm firmware.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 23bb6c41fca3..cc153f4e6979 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3578,6 +3578,75 @@  qspi: spi@88dc000 {
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
 			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;