diff mbox series

[v6] scripts/gdb: add lx_current support for riscv

Message ID 20231026233837.612405-1-debug@rivosinc.com
State New
Headers
Series [v6] scripts/gdb: add lx_current support for riscv |

Commit Message

Deepak Gupta Oct. 26, 2023, 11:38 p.m. UTC 
  csr_sscratch CSR holds current task_struct address when hart is in
user space. Trap handler on entry spills csr_sscratch into "tp" (x2)
register and zeroes out csr_sscratch CSR. Trap handler on exit reloads
"tp" with expected user mode value and place current task_struct address
again in csr_sscratch CSR.

This patch assumes "tp" is pointing to task_struct. If value in
csr_sscratch is numerically greater than "tp" then it assumes csr_sscratch
is correct address of current task_struct. This logic holds when
   - hart is in user space, "tp" will be less than csr_sscratch.
   - hart is in kernel space but not in trap handler, "tp" will be more
     than csr_sscratch (csr_sscratch being equal to 0).
   - hart is executing trap handler
       - "tp" is still pointing to user mode but csr_sscratch contains
          ptr to task_struct. Thus numerically higher.
       - "tp" is  pointing to task_struct but csr_sscratch now contains
          either 0 or numerically smaller value (transiently holds
          user mode tp)

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>

---
Since patch has changed a little bit from v1 and I didn't include
changelog earlier, here it is.

v1 --> v2:
 - added logic to locate task_struct irrespective of priv
 - made locating task_struct agnostic to bitness(32 vs 64).
 - added caching of ulong type in scripts/gdb/linux/utils.py
 - added more descriptive commit message

v2 --> v3:
 - amended commit message and source line to fit column width

v3 --> v4:
 - amended commit message and remove whitespace in source
 - added Reviewed-by for reviewers

v4 --> v5:
 - changing the order of changelog and sign off/review tags in commit

v5 --> v6:
 - rebased on 6.6-rc5. dropped changes in utils.py as they're upstream
---
 scripts/gdb/linux/cpus.py | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Deepak Gupta Nov. 2, 2023, 3:45 p.m. UTC | #1 
Ping

+ CC: akpm@linux-foundation.org

Who should I ping to make sure that it lands up in mainline?
It's quite a trivial change to support lx_current riscv arch.

-Deepak

On Thu, Oct 26, 2023 at 04:38:23PM -0700, Deepak Gupta wrote:
>csr_sscratch CSR holds current task_struct address when hart is in
>user space. Trap handler on entry spills csr_sscratch into "tp" (x2)
>register and zeroes out csr_sscratch CSR. Trap handler on exit reloads
>"tp" with expected user mode value and place current task_struct address
>again in csr_sscratch CSR.
>
>This patch assumes "tp" is pointing to task_struct. If value in
>csr_sscratch is numerically greater than "tp" then it assumes csr_sscratch
>is correct address of current task_struct. This logic holds when
>   - hart is in user space, "tp" will be less than csr_sscratch.
>   - hart is in kernel space but not in trap handler, "tp" will be more
>     than csr_sscratch (csr_sscratch being equal to 0).
>   - hart is executing trap handler
>       - "tp" is still pointing to user mode but csr_sscratch contains
>          ptr to task_struct. Thus numerically higher.
>       - "tp" is  pointing to task_struct but csr_sscratch now contains
>          either 0 or numerically smaller value (transiently holds
>          user mode tp)
>
>Signed-off-by: Deepak Gupta <debug@rivosinc.com>
>Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
>Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
>Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
>Tested-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
>
>---
>Since patch has changed a little bit from v1 and I didn't include
>changelog earlier, here it is.
>
>v1 --> v2:
> - added logic to locate task_struct irrespective of priv
> - made locating task_struct agnostic to bitness(32 vs 64).
> - added caching of ulong type in scripts/gdb/linux/utils.py
> - added more descriptive commit message
>
>v2 --> v3:
> - amended commit message and source line to fit column width
>
>v3 --> v4:
> - amended commit message and remove whitespace in source
> - added Reviewed-by for reviewers
>
>v4 --> v5:
> - changing the order of changelog and sign off/review tags in commit
>
>v5 --> v6:
> - rebased on 6.6-rc5. dropped changes in utils.py as they're upstream
>---
> scripts/gdb/linux/cpus.py | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
>diff --git a/scripts/gdb/linux/cpus.py b/scripts/gdb/linux/cpus.py
>index 255dc18cb9da..cba589e5b57d 100644
>--- a/scripts/gdb/linux/cpus.py
>+++ b/scripts/gdb/linux/cpus.py
>@@ -179,6 +179,21 @@ def get_current_task(cpu):
>         else:
>             raise gdb.GdbError("Sorry, obtaining the current task is not allowed "
>                                "while running in userspace(EL0)")
>+    elif utils.is_target_arch("riscv"):
>+        current_tp = gdb.parse_and_eval("$tp")
>+        scratch_reg = gdb.parse_and_eval("$sscratch")
>+
>+        # by default tp points to current task
>+        current_task = current_tp.cast(task_ptr_type)
>+
>+        # scratch register is set 0 in trap handler after entering kernel.
>+        # When hart is in user mode, scratch register is pointing to task_struct.
>+        # and tp is used by user mode. So when scratch register holds larger value
>+        # (negative address as ulong is larger value) than tp, then use scratch register.
>+        if (scratch_reg.cast(utils.get_ulong_type()) > current_tp.cast(utils.get_ulong_type())):
>+            current_task = scratch_reg.cast(task_ptr_type)
>+
>+        return current_task.dereference()
>     else:
>         raise gdb.GdbError("Sorry, obtaining the current task is not yet "
>                            "supported with this arch")
>-- 
>2.42.0
>
Andrew Morton Nov. 2, 2023, 3:56 p.m. UTC | #2 
On Thu, 2 Nov 2023 08:45:17 -0700 Deepak Gupta <debug@rivosinc.com> wrote:

> Ping
> 
> + CC: akpm@linux-foundation.org
> 
> Who should I ping to make sure that it lands up in mainline?
> It's quite a trivial change to support lx_current riscv arch.

I moved it from mm.git's mm-nonmm-unstable branch into the
mm-nonmm-stable branch earlier this week.  mm-nonmm-stable is what I'll
be sending to Linus later this merge window.
Deepak Gupta Nov. 2, 2023, 3:58 p.m. UTC | #3 
On Thu, Nov 2, 2023 at 8:56 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Thu, 2 Nov 2023 08:45:17 -0700 Deepak Gupta <debug@rivosinc.com> wrote:
>
> > Ping
> >
> > + CC: akpm@linux-foundation.org
> >
> > Who should I ping to make sure that it lands up in mainline?
> > It's quite a trivial change to support lx_current riscv arch.
>
> I moved it from mm.git's mm-nonmm-unstable branch into the
> mm-nonmm-stable branch earlier this week.  mm-nonmm-stable is what I'll
> be sending to Linus later this merge window.
>
Thanks
diff mbox series

Patch

diff --git a/scripts/gdb/linux/cpus.py b/scripts/gdb/linux/cpus.py
index 255dc18cb9da..cba589e5b57d 100644
--- a/scripts/gdb/linux/cpus.py
+++ b/scripts/gdb/linux/cpus.py
@@ -179,6 +179,21 @@  def get_current_task(cpu):
         else:
             raise gdb.GdbError("Sorry, obtaining the current task is not allowed "
                                "while running in userspace(EL0)")
+    elif utils.is_target_arch("riscv"):
+        current_tp = gdb.parse_and_eval("$tp")
+        scratch_reg = gdb.parse_and_eval("$sscratch")
+
+        # by default tp points to current task
+        current_task = current_tp.cast(task_ptr_type)
+
+        # scratch register is set 0 in trap handler after entering kernel.
+        # When hart is in user mode, scratch register is pointing to task_struct.
+        # and tp is used by user mode. So when scratch register holds larger value
+        # (negative address as ulong is larger value) than tp, then use scratch register.
+        if (scratch_reg.cast(utils.get_ulong_type()) > current_tp.cast(utils.get_ulong_type())):
+            current_task = scratch_reg.cast(task_ptr_type)
+
+        return current_task.dereference()
     else:
         raise gdb.GdbError("Sorry, obtaining the current task is not yet "
                            "supported with this arch")