@@ -22,6 +22,12 @@
#define APLIC_PLIC_ID(x) ((x) >> 24)
#define IDC_CONTEXT_ID(x) ((x) & 0x0000ffff)
+#ifdef CONFIG_RISCV_APLIC
+struct fwnode_handle *aplic_get_gsi_domain_id(u32 gsi);
+#else
+static inline struct fwnode_handle *aplic_get_gsi_domain_id(u32 gsi) { return NULL; }
+#endif
+
int __init acpi_get_intc_index_hartid(u32 index, unsigned long *hartid);
int acpi_get_ext_intc_parent_hartid(u8 id, u32 idx, unsigned long *hartid);
void acpi_get_plic_nr_contexts(u8 id, int *nr_contexts);
@@ -4,6 +4,7 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
@@ -14,6 +15,7 @@
#include <linux/of_address.h>
#include <linux/printk.h>
#include <linux/smp.h>
+#include <asm/acpi.h>
#include "irq-riscv-aplic-main.h"
@@ -203,17 +205,20 @@ static int aplic_direct_starting_cpu(unsigned int cpu)
static int aplic_direct_parse_parent_hwirq(struct device *dev,
u32 index, u32 *parent_hwirq,
- unsigned long *parent_hartid)
+ unsigned long *parent_hartid,
+ struct aplic_priv *priv)
{
struct of_phandle_args parent;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!is_of_node(dev->fwnode))
- return -EINVAL;
+ if (!is_of_node(dev->fwnode)) {
+ rc = acpi_get_ext_intc_parent_hartid(priv->id, index, parent_hartid);
+ if (rc)
+ return rc;
+
+ *parent_hwirq = RV_IRQ_EXT;
+ return 0;
+ }
rc = of_irq_parse_one(to_of_node(dev->fwnode), index, &parent);
if (rc)
@@ -251,7 +256,7 @@ int aplic_direct_setup(struct device *dev, void __iomem *regs)
/* Setup per-CPU IDC and target CPU mask */
for (i = 0; i < priv->nr_idcs; i++) {
- rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid);
+ rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid, priv);
if (rc) {
dev_warn(dev, "parent irq for IDC%d not found\n", i);
continue;
@@ -335,6 +340,7 @@ int aplic_direct_setup(struct device *dev, void __iomem *regs)
return -ENOMEM;
}
+ dev_set_drvdata(dev, priv);
/* Advertise the interrupt controller */
dev_info(dev, "%d interrupts directly connected to %d CPUs\n",
priv->nr_irqs, priv->nr_idcs);
@@ -4,12 +4,15 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/printk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/irqchip/riscv-aplic.h>
+#include <linux/irqchip/riscv-imsic.h>
+#include <asm/acpi.h>
#include "irq-riscv-aplic-main.h"
@@ -137,38 +140,44 @@ int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
void __iomem *regs)
{
struct of_phandle_args parent;
+ struct acpi_madt_aplic *aplic;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!is_of_node(dev->fwnode))
- return -EINVAL;
-
/* Save device pointer and register base */
priv->dev = dev;
priv->regs = regs;
- /* Find out number of interrupt sources */
- rc = of_property_read_u32(to_of_node(dev->fwnode),
- "riscv,num-sources",
- &priv->nr_irqs);
- if (rc) {
- dev_err(dev, "failed to get number of interrupt sources\n");
- return rc;
- }
-
- /*
- * Find out number of IDCs based on parent interrupts
- *
- * If "msi-parent" property is present then we ignore the
- * APLIC IDCs which forces the APLIC driver to use MSI mode.
- */
- if (!of_property_present(to_of_node(dev->fwnode), "msi-parent")) {
- while (!of_irq_parse_one(to_of_node(dev->fwnode),
- priv->nr_idcs, &parent))
- priv->nr_idcs++;
+ if (is_of_node(dev->fwnode)) {
+ /* Find out number of interrupt sources */
+ rc = of_property_read_u32(to_of_node(dev->fwnode),
+ "riscv,num-sources",
+ &priv->nr_irqs);
+ if (rc) {
+ dev_err(dev, "failed to get number of interrupt sources\n");
+ return rc;
+ }
+
+ /*
+ * Find out number of IDCs based on parent interrupts
+ *
+ * If "msi-parent" property is present then we ignore the
+ * APLIC IDCs which forces the APLIC driver to use MSI mode.
+ */
+ if (!of_property_present(to_of_node(dev->fwnode), "msi-parent")) {
+ while (!of_irq_parse_one(to_of_node(dev->fwnode),
+ priv->nr_idcs, &parent))
+ priv->nr_idcs++;
+ }
+ } else {
+ aplic = *(struct acpi_madt_aplic **)dev_get_platdata(dev);
+ if (!aplic) {
+ dev_err(dev, "APLIC platform data is NULL!\n");
+ return -1;
+ }
+ priv->gsi_base = aplic->gsi_base;
+ priv->nr_irqs = aplic->num_sources;
+ priv->nr_idcs = aplic->num_idcs;
+ priv->id = aplic->id;
}
/* Setup initial state APLIC interrupts */
@@ -177,9 +186,36 @@ int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
return 0;
}
+#ifdef CONFIG_ACPI
+
+LIST_HEAD(aplic_list);
+struct aplic_priv_list {
+ struct aplic_priv *priv;
+ struct list_head list;
+};
+
+struct fwnode_handle *aplic_get_gsi_domain_id(u32 gsi)
+{
+ struct aplic_priv_list *aplic_element;
+ struct list_head *i, *tmp;
+
+ /* Find the APLIC that manages this GSI. */
+ list_for_each_safe(i, tmp, &aplic_list) {
+ aplic_element = list_entry(i, struct aplic_priv_list, list);
+ if (gsi >= aplic_element->priv->gsi_base &&
+ gsi < (aplic_element->priv->gsi_base + aplic_element->priv->nr_irqs))
+ return aplic_element->priv->dev->fwnode;
+ }
+
+ return NULL;
+}
+
+#endif
+
static int aplic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct aplic_priv *priv;
bool msi_mode = false;
struct resource *res;
void __iomem *regs;
@@ -204,6 +240,9 @@ static int aplic_probe(struct platform_device *pdev)
if (is_of_node(dev->fwnode))
msi_mode = of_property_present(to_of_node(dev->fwnode),
"msi-parent");
+ else
+ msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0;
+
if (msi_mode)
rc = aplic_msi_setup(dev, regs);
else
@@ -214,6 +253,20 @@ static int aplic_probe(struct platform_device *pdev)
return rc;
}
+#ifdef CONFIG_ACPI
+ struct aplic_priv_list *aplic_element;
+
+ priv = dev_get_drvdata(dev);
+ if (priv) {
+ aplic_element = devm_kzalloc(dev, sizeof(*aplic_element), GFP_KERNEL);
+ if (!aplic_element)
+ return -ENOMEM;
+
+ aplic_element->priv = priv;
+ list_add_tail(&aplic_element->list, &aplic_list);
+ }
+#endif
+
return 0;
}
@@ -28,6 +28,7 @@ struct aplic_priv {
u32 gsi_base;
u32 nr_irqs;
u32 nr_idcs;
+ u32 id;
void __iomem *regs;
struct aplic_msicfg msicfg;
};
@@ -178,6 +178,7 @@ static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg)
int aplic_msi_setup(struct device *dev, void __iomem *regs)
{
const struct imsic_global_config *imsic_global;
+ struct irq_domain *msi_domain;
struct irq_domain *irqdomain;
struct aplic_priv *priv;
struct aplic_msicfg *mc;
@@ -261,8 +262,14 @@ int aplic_msi_setup(struct device *dev, void __iomem *regs)
* IMSIC and the IMSIC MSI domains are created later through
* the platform driver probing so we set it explicitly here.
*/
- if (is_of_node(dev->fwnode))
+ if (is_of_node(dev->fwnode)) {
of_msi_configure(dev, to_of_node(dev->fwnode));
+ } else {
+ msi_domain = irq_find_matching_fwnode(imsic_acpi_get_fwnode(dev),
+ DOMAIN_BUS_PLATFORM_MSI);
+ if (msi_domain)
+ dev_set_msi_domain(dev, msi_domain);
+ }
}
/* Create irq domain instance for the APLIC MSI-mode */
@@ -276,6 +283,7 @@ int aplic_msi_setup(struct device *dev, void __iomem *regs)
return -ENOMEM;
}
+ dev_set_drvdata(dev, priv);
/* Advertise the interrupt controller */
pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT;
dev_info(dev, "%d interrupts forwared to MSI base %pa\n",