[4/8] arm64: dts: mediatek: Move MT6358 PMIC interrupts to MT8183 boards
Commit Message
MT6358 is a PMIC that is typically used on MT8183 boards, and it has
its own dtsi file, declaring interrupts-extended on its node.
The interrupt pin of that PMIC is connected to a SoC GPIO and that
is therefore not only SoC-specific, but board-specific: this means
that the interrupt-extended property does not belong to the PMIC
dtsi file, but to board files using that PMIC.
For correctness, transfer the interrupts-extended property from the
PMIC-specific mt6358.dtsi to board files.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt6358.dtsi | 1 -
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 4 ++++
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts | 4 ++++
4 files changed, 12 insertions(+), 1 deletion(-)
@@ -8,7 +8,6 @@ &pwrap {
pmic: pmic {
compatible = "mediatek,mt6358";
interrupt-controller;
- interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
mt6358codec: mt6358codec {
@@ -381,6 +381,10 @@ pins_pwm {
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
@@ -846,6 +846,10 @@ pins_wifi_wakeup {
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&pwm0 {
status = "okay";
pinctrl-names = "default";
@@ -370,6 +370,10 @@ pins_clk {
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&mfg {
domain-supply = <&mt6358_vgpu_reg>;
};