[v2,1/4] ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
Commit Message
According to the dts from the kernel source code released by Samsung,
matissewifi and matisselte only have minor differences in hardware, so
use a shared dtsi to reduce duplicated code. Additionally, this should
make adding support for matisse3g easier should someone want to do that
at a later point.
As such, add a common device tree for all matisse devices by Samsung
based on the matissewifi dts. Support for matisselte will be introduced
in a later patch in this series and will use the common dtsi as well.
Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
---
.../qcom-apq8026-samsung-matisse-wifi.dts | 467 +----------------
.../qcom-msm8226-samsung-matisse-common.dtsi | 474 ++++++++++++++++++
2 files changed, 483 insertions(+), 458 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
Comments
On 24/10/2023 22:33, Stefan Hansson wrote:
> According to the dts from the kernel source code released by Samsung,
> matissewifi and matisselte only have minor differences in hardware, so
> use a shared dtsi to reduce duplicated code. Additionally, this should
> make adding support for matisse3g easier should someone want to do that
> at a later point.
>
> As such, add a common device tree for all matisse devices by Samsung
> based on the matissewifi dts. Support for matisselte will be introduced
> in a later patch in this series and will use the common dtsi as well.
>
> Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
> ---
> .../qcom-apq8026-samsung-matisse-wifi.dts | 467 +----------------
> .../qcom-msm8226-samsung-matisse-common.dtsi | 474 ++++++++++++++++++
> 2 files changed, 483 insertions(+), 458 deletions(-)
It's impossible to review this change. Please use proper -B/-M/-C
arguments to format-patch to detect code move.
Best regards,
Krzysztof
@@ -5,222 +5,12 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-/delete-node/ &smem_region;
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
/ {
model = "Samsung Galaxy Tab 4 10.1";
compatible = "samsung,matisse-wifi", "qcom,apq8026";
chassis-type = "tablet";
-
- aliases {
- mmc0 = &sdhc_1; /* SDC1 eMMC slot */
- mmc1 = &sdhc_2; /* SDC2 SD card slot */
- display0 = &framebuffer0;
- };
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- stdout-path = "display0";
-
- framebuffer0: framebuffer@3200000 {
- compatible = "simple-framebuffer";
- reg = <0x03200000 0x800000>;
- width = <1280>;
- height = <800>;
- stride = <(1280 * 3)>;
- format = "r8g8b8";
- };
- };
-
- gpio-hall-sensor {
- compatible = "gpio-keys";
-
- event-hall-sensor {
- label = "Hall Effect Sensor";
- gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- debounce-interval = <15>;
- linux,can-disable;
- wakeup-source;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- key-home {
- label = "Home";
- gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOMEPAGE>;
- debounce-interval = <15>;
- };
-
- key-volume-down {
- label = "Volume Down";
- gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- key-volume-up {
- label = "Volume Up";
- gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
- i2c-backlight {
- compatible = "i2c-gpio";
- sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
- pinctrl-0 = <&backlight_i2c_default_state>;
- pinctrl-names = "default";
-
- i2c-gpio,delay-us = <4>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- backlight@2c {
- compatible = "ti,lp8556";
- reg = <0x2c>;
-
- dev-ctrl = /bits/ 8 <0x80>;
- init-brt = /bits/ 8 <0x3f>;
-
- pwms = <&backlight_pwm 0 100000>;
- pwm-names = "lp8556";
-
- rom-a0h {
- rom-addr = /bits/ 8 <0xa0>;
- rom-val = /bits/ 8 <0x44>;
- };
-
- rom-a1h {
- rom-addr = /bits/ 8 <0xa1>;
- rom-val = /bits/ 8 <0x6c>;
- };
-
- rom-a5h {
- rom-addr = /bits/ 8 <0xa5>;
- rom-val = /bits/ 8 <0x24>;
- };
- };
- };
-
- backlight_pwm: pwm {
- compatible = "clk-pwm";
- #pwm-cells = <2>;
- clocks = <&mmcc CAMSS_GP0_CLK>;
- pinctrl-0 = <&backlight_pwm_default_state>;
- pinctrl-names = "default";
- };
-
- reg_tsp_1p8v: regulator-tsp-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "tsp_1p8v";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&tsp_en_default_state>;
- };
-
- reg_tsp_3p3v: regulator-tsp-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "tsp_3p3v";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&tsp_en1_default_state>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer@3200000 {
- reg = <0x03200000 0x800000>;
- no-map;
- };
-
- mpss@8400000 {
- reg = <0x08400000 0x1f00000>;
- no-map;
- };
-
- mba@a300000 {
- reg = <0x0a300000 0x100000>;
- no-map;
- };
-
- reserved@cb00000 {
- reg = <0x0cb00000 0x700000>;
- no-map;
- };
-
- wcnss@d200000 {
- reg = <0x0d200000 0x700000>;
- no-map;
- };
-
- adsp_region: adsp@d900000 {
- reg = <0x0d900000 0x1800000>;
- no-map;
- };
-
- venus@f100000 {
- reg = <0x0f100000 0x500000>;
- no-map;
- };
-
- smem_region: smem@fa00000 {
- reg = <0x0fa00000 0x100000>;
- no-map;
- };
-
- reserved@fb00000 {
- reg = <0x0fb00000 0x260000>;
- no-map;
- };
-
- rfsa@fd60000 {
- reg = <0x0fd60000 0x20000>;
- no-map;
- };
-
- rmtfs@fd80000 {
- compatible = "qcom,rmtfs-mem";
- reg = <0x0fd80000 0x180000>;
- no-map;
-
- qcom,client-id = <1>;
- };
- };
-};
-
-&adsp {
- status = "okay";
};
&blsp1_i2c2 {
@@ -243,21 +33,6 @@ accelerometer@1d {
};
};
-&blsp1_i2c4 {
- status = "okay";
-
- muic: usb-switch@25 {
- compatible = "siliconmitus,sm5502-muic";
- reg = <0x25>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&muic_int_default_state>;
- };
-};
-
&blsp1_i2c5 {
status = "okay";
@@ -278,242 +53,18 @@ touchscreen@4a {
};
};
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-pm8226-regulators";
-
- pm8226_s3: s3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pm8226_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8226_s5: s5 {
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- };
-
- pm8226_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pm8226_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8226_l3: l3 {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1337500>;
- regulator-always-on;
- };
-
- pm8226_l4: l4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8226_l5: l5 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8226_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pm8226_l7: l7 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
-
- pm8226_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pm8226_l9: l9 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pm8226_l10: l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8226_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8226_l14: l14 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <2750000>;
- };
-
- pm8226_l15: l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pm8226_l16: l16 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3350000>;
- };
-
- pm8226_l17: l17 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- regulator-always-on;
- };
-
- pm8226_l18: l18 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8226_l19: l19 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8226_l20: l20 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pm8226_l21: l21 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8226_l22: l22 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8226_l23: l23 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pm8226_l24: l24 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- pm8226_l25: l25 {
- regulator-min-microvolt = <1775000>;
- regulator-max-microvolt = <2125000>;
- };
-
- pm8226_l26: l26 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pm8226_l27: l27 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8226_l28: l28 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8226_lvs1: lvs1 {};
- };
-};
-
-&sdhc_1 {
- vmmc-supply = <&pm8226_l17>;
- vqmmc-supply = <&pm8226_l6>;
-
- bus-width = <8>;
- non-removable;
-
- status = "okay";
-};
-
-&sdhc_2 {
- vmmc-supply = <&pm8226_l18>;
- vqmmc-supply = <&pm8226_l21>;
-
- bus-width = <4>;
- cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-
- status = "okay";
+&pm8226_l3 {
+ regulator-max-microvolt = <1337500>;
};
-&tlmm {
- accel_int_default_state: accel-int-default-state {
- pins = "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- backlight_i2c_default_state: backlight-i2c-default-state {
- pins = "gpio20", "gpio21";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- backlight_pwm_default_state: backlight-pwm-default-state {
- pins = "gpio33";
- function = "gp0_clk";
- };
-
- muic_int_default_state: muic-int-default-state {
- pins = "gpio67";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- tsp_en_default_state: tsp-en-default-state {
- pins = "gpio31";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- tsp_en1_default_state: tsp-en1-default-state {
- pins = "gpio73";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- tsp_int_rst_default_state: tsp-int-rst-default-state {
- pins = "gpio17";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
+&pm8226_s4 {
+ regulator-max-microvolt = <1800000>;
};
-&usb {
- extcon = <&muic>, <&muic>;
- status = "okay";
+®_tsp_3p3v {
+ gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
};
-&usb_hs_phy {
- extcon = <&muic>;
- v1p8-supply = <&pm8226_l10>;
- v3p3-supply = <&pm8226_l20>;
+&tsp_en1_default_state {
+ pins = "gpio73";
};
new file mode 100644
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ display0 = &framebuffer0;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ stdout-path = "display0";
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <1280>;
+ height = <800>;
+ stride = <(1280 * 3)>;
+ format = "r8g8b8";
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ key-home {
+ label = "Home";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ i2c-backlight {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&backlight_i2c_default_state>;
+ pinctrl-names = "default";
+
+ i2c-gpio,delay-us = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+
+ dev-ctrl = /bits/ 8 <0x80>;
+ init-brt = /bits/ 8 <0x3f>;
+
+ pwms = <&backlight_pwm 0 100000>;
+ pwm-names = "lp8556";
+
+ rom-a0h {
+ rom-addr = /bits/ 8 <0xa0>;
+ rom-val = /bits/ 8 <0x44>;
+ };
+
+ rom-a1h {
+ rom-addr = /bits/ 8 <0xa1>;
+ rom-val = /bits/ 8 <0x6c>;
+ };
+
+ rom-a5h {
+ rom-addr = /bits/ 8 <0xa5>;
+ rom-val = /bits/ 8 <0x24>;
+ };
+ };
+ };
+
+ backlight_pwm: pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+ clocks = <&mmcc CAMSS_GP0_CLK>;
+ pinctrl-0 = <&backlight_pwm_default_state>;
+ pinctrl-names = "default";
+ };
+
+ reg_tsp_1p8v: regulator-tsp-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_1p8v";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en_default_state>;
+ pinctrl-names = "default";
+ };
+
+ reg_tsp_3p3v: regulator-tsp-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ /* GPIO is board-specific */
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en1_default_state>;
+ pinctrl-names = "default";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ mpss@8400000 {
+ reg = <0x08400000 0x1f00000>;
+ no-map;
+ };
+
+ mba@a300000 {
+ reg = <0x0a300000 0x100000>;
+ no-map;
+ };
+
+ reserved@cb00000 {
+ reg = <0x0cb00000 0x700000>;
+ no-map;
+ };
+
+ wcnss@d200000 {
+ reg = <0x0d200000 0x700000>;
+ no-map;
+ };
+
+ adsp_region: adsp@d900000 {
+ reg = <0x0d900000 0x1800000>;
+ no-map;
+ };
+
+ venus@f100000 {
+ reg = <0x0f100000 0x500000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ reserved@fb00000 {
+ reg = <0x0fb00000 0x260000>;
+ no-map;
+ };
+
+ rfsa@fd60000 {
+ reg = <0x0fd60000 0x20000>;
+ no-map;
+ };
+
+ rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0fd80000 0x180000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+ };
+};
+
+&adsp {
+ status = "okay";
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ muic: usb-switch@25 {
+ compatible = "siliconmitus,sm5502-muic";
+ reg = <0x25>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&muic_int_default_state>;
+ pinctrl-names = "default";
+ };
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ /* Upper voltage constraint is board-specific */
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* Upper voltage constraint is board-specific */
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-always-on;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default_state: accel-int-default-state {
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ backlight_i2c_default_state: backlight-i2c-default-state {
+ pins = "gpio20", "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ backlight_pwm_default_state: backlight-pwm-default-state {
+ pins = "gpio33";
+ function = "gp0_clk";
+ };
+
+ muic_int_default_state: muic-int-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_en_default_state: tsp-en-default-state {
+ pins = "gpio31";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_en1_default_state: tsp-en1-default-state {
+ /* pins is board-specific */
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_rst_default_state: tsp-int-rst-default-state {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+};
+
+&usb {
+ extcon = <&muic>, <&muic>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&muic>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};