scsi: bnx2fc: replace deprecated strncpy with strscpy
Commit Message
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect hba->chip_num to be NUL-terminated based on its usage with
format strings:
snprintf(fc_host_symbolic_name(lport->host), 256,
"%s (QLogic %s) v%s over %s",
BNX2FC_NAME, hba->chip_num, BNX2FC_VERSION,
interface->netdev->name);
Moreover, NUL-padding is not required as hba is zero-allocated from its
callsite:
hba = kzalloc(sizeof(*hba), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Regarding stats_addr->version, I've opted to also use strscpy() instead
of strscpy_pad() as I typically see these XYZ_get_strings() pass
zero-allocated data. I couldn't track all of where
bnx2fc_ulp_get_stats() is used and if required, we could opt for
strscpy_pad().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
---
Note: build-tested only.
Found with: $ rg "strncpy\("
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
---
base-commit: 9c5d00cb7b6bbc5a7965d9ab7d223b5402d1f02c
change-id: 20231023-strncpy-drivers-scsi-bnx2fc-bnx2fc_fcoe-c-f24335846e35
Best regards,
--
Justin Stitt <justinstitt@google.com>
Comments
On Mon, Oct 23, 2023 at 08:12:22PM +0000, Justin Stitt wrote:
> strncpy() is deprecated for use on NUL-terminated destination strings
> [1] and as such we should prefer more robust and less ambiguous string
> interfaces.
>
> We expect hba->chip_num to be NUL-terminated based on its usage with
> format strings:
>
> snprintf(fc_host_symbolic_name(lport->host), 256,
> "%s (QLogic %s) v%s over %s",
> BNX2FC_NAME, hba->chip_num, BNX2FC_VERSION,
> interface->netdev->name);
>
> Moreover, NUL-padding is not required as hba is zero-allocated from its
> callsite:
>
> hba = kzalloc(sizeof(*hba), GFP_KERNEL);
>
> Considering the above, a suitable replacement is `strscpy` [2] due to
> the fact that it guarantees NUL-termination on the destination buffer
> without unnecessarily NUL-padding.
>
> Regarding stats_addr->version, I've opted to also use strscpy() instead
> of strscpy_pad() as I typically see these XYZ_get_strings() pass
> zero-allocated data. I couldn't track all of where
> bnx2fc_ulp_get_stats() is used and if required, we could opt for
> strscpy_pad().
>
> Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
> Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
> Link: https://github.com/KSPP/linux/issues/90
> Cc: linux-hardening@vger.kernel.org
> Signed-off-by: Justin Stitt <justinstitt@google.com>
This all looks correct to me.
Reviewed-by: Kees Cook <keescook@chromium.org>
Justin,
> strncpy() is deprecated for use on NUL-terminated destination strings
> [1] and as such we should prefer more robust and less ambiguous string
> interfaces.
Applied to 6.8/scsi-staging, thanks!
On Mon, 23 Oct 2023 20:12:22 +0000, Justin Stitt wrote:
> strncpy() is deprecated for use on NUL-terminated destination strings
> [1] and as such we should prefer more robust and less ambiguous string
> interfaces.
>
> We expect hba->chip_num to be NUL-terminated based on its usage with
> format strings:
>
> [...]
Applied to 6.8/scsi-queue, thanks!
[1/1] scsi: bnx2fc: replace deprecated strncpy with strscpy
https://git.kernel.org/mkp/scsi/c/b04a2eff9e9c
@@ -1737,32 +1737,32 @@ static int bnx2fc_bind_pcidev(struct bnx2fc_hba *hba)
switch (pdev->device) {
case PCI_DEVICE_ID_NX2_57710:
- strncpy(hba->chip_num, "BCM57710", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57710", sizeof(hba->chip_num));
break;
case PCI_DEVICE_ID_NX2_57711:
- strncpy(hba->chip_num, "BCM57711", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57711", sizeof(hba->chip_num));
break;
case PCI_DEVICE_ID_NX2_57712:
case PCI_DEVICE_ID_NX2_57712_MF:
case PCI_DEVICE_ID_NX2_57712_VF:
- strncpy(hba->chip_num, "BCM57712", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57712", sizeof(hba->chip_num));
break;
case PCI_DEVICE_ID_NX2_57800:
case PCI_DEVICE_ID_NX2_57800_MF:
case PCI_DEVICE_ID_NX2_57800_VF:
- strncpy(hba->chip_num, "BCM57800", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57800", sizeof(hba->chip_num));
break;
case PCI_DEVICE_ID_NX2_57810:
case PCI_DEVICE_ID_NX2_57810_MF:
case PCI_DEVICE_ID_NX2_57810_VF:
- strncpy(hba->chip_num, "BCM57810", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57810", sizeof(hba->chip_num));
break;
case PCI_DEVICE_ID_NX2_57840:
case PCI_DEVICE_ID_NX2_57840_MF:
case PCI_DEVICE_ID_NX2_57840_VF:
case PCI_DEVICE_ID_NX2_57840_2_20:
case PCI_DEVICE_ID_NX2_57840_4_10:
- strncpy(hba->chip_num, "BCM57840", BCM_CHIP_LEN);
+ strscpy(hba->chip_num, "BCM57840", sizeof(hba->chip_num));
break;
default:
pr_err(PFX "Unknown device id 0x%x\n", pdev->device);
@@ -1800,7 +1800,7 @@ static int bnx2fc_ulp_get_stats(void *handle)
if (!stats_addr)
return -EINVAL;
- strncpy(stats_addr->version, BNX2FC_VERSION,
+ strscpy(stats_addr->version, BNX2FC_VERSION,
sizeof(stats_addr->version));
stats_addr->txq_size = BNX2FC_SQ_WQES_MAX;
stats_addr->rxq_size = BNX2FC_CQ_WQES_MAX;