diff mbox series

[net-next,v5,3/7] ARM: dts: marvell: Fix some common switch mistakes

Message ID 20231023-marvell-88e6152-wan-led-v5-3-0e82952015a7@linaro.org
State New
Headers
Series Create a binding for the Marvell MV88E6xxx DSA switches |

Commit Message

Linus Walleij Oct. 23, 2023, 7:18 a.m. UTC 
  Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be ethernet-switch@0.
- The ports node should be named ethernet-ports
- The ethernet-ports node should have port@0 etc children, no
  plural "ports" in the children.
- Ports should be named ethernet-port@0 etc
- PHYs should be named ethernet-phy@0 etc

This serves as an example of fixes needed for introducing a
schema for the bindings, but the patch can simply be applied.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/marvell/armada-370-rd.dts        | 24 ++++++------
 .../dts/marvell/armada-381-netgear-gs110emx.dts    | 44 +++++++++++-----------
 .../dts/marvell/armada-385-clearfog-gtr-l8.dts     | 38 +++++++++----------
 .../dts/marvell/armada-385-clearfog-gtr-s4.dts     | 22 +++++------
 arch/arm/boot/dts/marvell/armada-385-linksys.dtsi  | 18 ++++-----
 .../boot/dts/marvell/armada-385-turris-omnia.dts   | 20 +++++-----
 arch/arm/boot/dts/marvell/armada-388-clearfog.dts  | 20 +++++-----
 .../boot/dts/marvell/armada-xp-linksys-mamba.dts   | 18 ++++-----
 8 files changed, 96 insertions(+), 108 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..1b241da11e94 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -149,39 +149,37 @@  led@0 {
 		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@  mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..5baf83e5253d 100644
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@  &mdio {
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,11 +140,11 @@  phy2: ethernet-phy@c {
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
 				phy-mode = "rgmii";
 				reg = <0>;
@@ -158,55 +156,55 @@  fixed-link {
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@  port@9 {
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1707d1b01545 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@  / {
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan8";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan7";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan6";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan5";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "lan3";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "lan2";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "lan1";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@10 {
+			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@  mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@1 {
+			switch0phy0: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy1: switch0phy1@2 {
+			switch0phy1: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy2: switch0phy2@3 {
+			switch0phy2: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy3: switch0phy3@4 {
+			switch0phy3: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy4: switch0phy4@5 {
+			switch0phy4: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy5: switch0phy5@6 {
+			switch0phy5: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy6: switch0phy6@7 {
+			switch0phy6: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy7: switch0phy7@8 {
+			switch0phy7: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..a7678a784c18 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@  &sfp0 {
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
@@ -63,19 +63,19 @@  mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..4116ed60f709 100644
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@  nand: nand@0 {
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "sgmii";
 				ethernet = <&eth2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7b755bb4e4e7 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@  phy1: ethernet-phy@1 {
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -448,36 +446,36 @@  switch@10 {
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@  fixed-link {
 				};
 			};
 
-			ports@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..3290ccad2374 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@  pcie2-0-w-disable-hog {
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "1000base-x";
@@ -140,7 +138,7 @@  fixed-link {
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..ea859f7ea042 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@  flash@0 {
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;