From patchwork Fri Oct 20 10:43:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Minda Chen X-Patchwork-Id: 155988 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:612c:2010:b0:403:3b70:6f57 with SMTP id fe16csp963306vqb; Fri, 20 Oct 2023 03:45:03 -0700 (PDT) X-Google-Smtp-Source: AGHT+IGH7Ntnp6fLGjUXPRUN0FF1echytNanDAJvQLkgNbQsutFbck6dHQkTgM0sMAFGjG1aR13p X-Received: by 2002:a17:903:2447:b0:1ca:b8d3:f880 with SMTP id l7-20020a170903244700b001cab8d3f880mr1856712pls.20.1697798702839; Fri, 20 Oct 2023 03:45:02 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1697798702; cv=none; d=google.com; s=arc-20160816; b=mfDKhBOFtRyKTIeat1OQRf5UuJofQl9MFgdSZT/s8E4S5Xc0OcD8GSrssyeB0PuZDA 1/rmzxkxfeo2QtAS/JZ2p50FS2dlOR3ZkJfnFv51SpJtaiMcgd4G1EYYEAaZf1sa9jjw odVtg9uUbmlWDYRHFBIxhAUb/W1oavNdKxhsU3lsKr05JmsOlfbhC45q939hXniGnqJ/ kr0M7shNLLApJazbghGNFLy9iAq7t9julHC2HgxXGZ0MNsrjhCkPDyHRzdMhBJmrE1tZ MB+2ZZcPfIrjrqrHKfkWybkl4PcT+/kYBKItBJHtEn6CCUOvjey0LK7FYzgjUzVaiaSm iwhw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:cc:to:from; bh=lX6/d+f4PzWihBieQi+/WGibmT4mq0aY5N0ExVZ0AM4=; fh=ld3UXb1S5Y4IkunPfuj6e9Ppmc+fy6ncC+eQtrVLfK8=; b=Bt8SDRERWeQJ5qZ56OZbxCKlosMLaJ0UG99Krb34W+Qld+o5cGeeS9+vztSer1Q9eM LqM5ETT6O4Ybgzgns2wI5LldXPxsYAdwND2RlKGlNNFQfm38fq28yMbMTwsv/q/2LOxF Z+OF2GDYN0GRM04llKETFmsAbl9iG2X6KUYqzj/uYNzpc/rKl3aJufSe09IUrkCik3sw SlFmSaXWiBz0ihZ0363QyL/pZc4N/mI0CgpRh+t9dOAxn4+u+ryjjCc7RvRWYEoBbefl XEtCiTZLTeLouLai4e7iCrZFbmwbaONPT26UYClODsVhcJYcPfRcZBiVzxwJyf7JwbMs 6INg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from lipwig.vger.email (lipwig.vger.email. [2620:137:e000::3:3]) by mx.google.com with ESMTPS id k3-20020a170902e90300b001c9ce2b6b97si1503781pld.198.2023.10.20.03.45.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 20 Oct 2023 03:45:02 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by lipwig.vger.email (Postfix) with ESMTP id 3C5C682A3B54; Fri, 20 Oct 2023 03:44:55 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at lipwig.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377066AbjJTKof (ORCPT + 25 others); Fri, 20 Oct 2023 06:44:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58866 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377038AbjJTKnz (ORCPT ); Fri, 20 Oct 2023 06:43:55 -0400 Received: from fd01.gateway.ufhost.com (fd01.gateway.ufhost.com [61.152.239.71]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1FF9DD5E; Fri, 20 Oct 2023 03:43:52 -0700 (PDT) Received: from EXMBX166.cuchost.com (unknown [175.102.18.54]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "EXMBX166", Issuer "EXMBX166" (not verified)) by fd01.gateway.ufhost.com (Postfix) with ESMTP id D224D24E17F; Fri, 20 Oct 2023 18:43:50 +0800 (CST) Received: from EXMBX171.cuchost.com (172.16.6.91) by EXMBX166.cuchost.com (172.16.6.76) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Fri, 20 Oct 2023 18:43:51 +0800 Received: from ubuntu.localdomain (183.27.99.123) by EXMBX171.cuchost.com (172.16.6.91) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Fri, 20 Oct 2023 18:43:49 +0800 From: Minda Chen To: Conor Dooley , =?utf-8?q?Krzysztof_Wilczy=C5=84ski?= , Rob Herring , Bjorn Helgaas , Lorenzo Pieralisi , "Daire McNamara" , Emil Renner Berthing , Krzysztof Kozlowski CC: , , , , Paul Walmsley , Palmer Dabbelt , Albert Ou , Philipp Zabel , Mason Huo , Leyfoon Tan , Kevin Xie , Minda Chen Subject: [PATCH v9 09/20] PCI: microchip: Move setup functions to pcie-plda-host.c Date: Fri, 20 Oct 2023 18:43:30 +0800 Message-ID: <20231020104341.63157-10-minda.chen@starfivetech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20231020104341.63157-1-minda.chen@starfivetech.com> References: <20231020104341.63157-1-minda.chen@starfivetech.com> MIME-Version: 1.0 X-Originating-IP: [183.27.99.123] X-ClientProxiedBy: EXCAS062.cuchost.com (172.16.6.22) To EXMBX171.cuchost.com (172.16.6.91) X-YovoleRuleAgent: yovoleflag X-Spam-Status: No, score=-0.8 required=5.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lipwig.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (lipwig.vger.email [0.0.0.0]); Fri, 20 Oct 2023 03:44:55 -0700 (PDT) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1780270972404740110 X-GMAIL-MSGID: 1780270972404740110 Move setup functions to common pcie-plda-host.c. So these two functions can be re-used. Signed-off-by: Minda Chen Reviewed-by: Conor Dooley --- drivers/pci/controller/plda/Kconfig | 4 + drivers/pci/controller/plda/Makefile | 1 + .../pci/controller/plda/pcie-microchip-host.c | 59 -------------- drivers/pci/controller/plda/pcie-plda-host.c | 80 +++++++++++++++++++ drivers/pci/controller/plda/pcie-plda.h | 5 ++ 5 files changed, 90 insertions(+), 59 deletions(-) create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig index 5cb3be4fc98c..e54a82ee94f5 100644 --- a/drivers/pci/controller/plda/Kconfig +++ b/drivers/pci/controller/plda/Kconfig @@ -3,10 +3,14 @@ menu "PLDA-based PCIe controllers" depends on PCI +config PCIE_PLDA_HOST + bool + config PCIE_MICROCHIP_HOST tristate "Microchip AXI PCIe controller" depends on PCI_MSI && OF select PCI_HOST_COMMON + select PCIE_PLDA_HOST help Say Y here if you want kernel to support the Microchip AXI PCIe Host Bridge driver. diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile index e1a265cbf91c..4340ab007f44 100644 --- a/drivers/pci/controller/plda/Makefile +++ b/drivers/pci/controller/plda/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c index 31ca8d44ee2a..2e79bcc7c0a5 100644 --- a/drivers/pci/controller/plda/pcie-microchip-host.c +++ b/drivers/pci/controller/plda/pcie-microchip-host.c @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port) return mc_allocate_msi_domains(port); } -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, - phys_addr_t axi_addr, phys_addr_t pci_addr, - size_t size) -{ - u32 atr_sz = ilog2(size) - 1; - u32 val; - - if (index == 0) - val = PCIE_CONFIG_INTERFACE; - else - val = PCIE_TX_RX_INTERFACE; - - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_PARAM); - - val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | - ATR_IMPL_ENABLE; - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_SRCADDR_PARAM); - - val = upper_32_bits(axi_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_SRC_ADDR); - - val = lower_32_bits(pci_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_ADDR_LSB); - - val = upper_32_bits(pci_addr); - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + - ATR0_AXI4_SLV0_TRSL_ADDR_UDW); - - val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); - writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); -} - -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, - struct plda_pcie_rp *port) -{ - void __iomem *bridge_base_addr = port->bridge_addr; - struct resource_entry *entry; - u64 pci_addr; - u32 index = 1; - - resource_list_for_each_entry(entry, &bridge->windows) { - if (resource_type(entry->res) == IORESOURCE_MEM) { - pci_addr = entry->res->start - entry->offset; - plda_pcie_setup_window(bridge_base_addr, index, - entry->res->start, pci_addr, - resource_size(entry->res)); - index++; - } - } - - return 0; -} - static inline void mc_clear_secs(struct mc_pcie *port) { void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR; diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c new file mode 100644 index 000000000000..19131181897f --- /dev/null +++ b/drivers/pci/controller/plda/pcie-plda-host.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PLDA PCIe XpressRich host controller driver + * + * Copyright (C) 2023 Microchip Co. Ltd + * + * Author: Daire McNamara + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-plda.h" + +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, + phys_addr_t axi_addr, phys_addr_t pci_addr, + size_t size) +{ + u32 atr_sz = ilog2(size) - 1; + u32 val; + + if (index == 0) + val = PCIE_CONFIG_INTERFACE; + else + val = PCIE_TX_RX_INTERFACE; + + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_PARAM); + + val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | + ATR_IMPL_ENABLE; + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_SRCADDR_PARAM); + + val = upper_32_bits(axi_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_SRC_ADDR); + + val = lower_32_bits(pci_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_ADDR_LSB); + + val = upper_32_bits(pci_addr); + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + + ATR0_AXI4_SLV0_TRSL_ADDR_UDW); + + val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); + val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); + writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); + writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); +} +EXPORT_SYMBOL_GPL(plda_pcie_setup_window); + +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, + struct plda_pcie_rp *port) +{ + void __iomem *bridge_base_addr = port->bridge_addr; + struct resource_entry *entry; + u64 pci_addr; + u32 index = 1; + + resource_list_for_each_entry(entry, &bridge->windows) { + if (resource_type(entry->res) == IORESOURCE_MEM) { + pci_addr = entry->res->start - entry->offset; + plda_pcie_setup_window(bridge_base_addr, index, + entry->res->start, pci_addr, + resource_size(entry->res)); + index++; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems); diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h index 363fcbbaf6ec..3deefd35fa5a 100644 --- a/drivers/pci/controller/plda/pcie-plda.h +++ b/drivers/pci/controller/plda/pcie-plda.h @@ -120,4 +120,9 @@ struct plda_pcie_rp { void __iomem *bridge_addr; }; +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, + phys_addr_t axi_addr, phys_addr_t pci_addr, + size_t size); +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, + struct plda_pcie_rp *port); #endif