@@ -1232,6 +1232,14 @@ config REGULATOR_RTQ6752
synchronous boost converters for PAVDD, and one synchronous NAVDD
buck-boost. This device is suitable for automotive TFT-LCD panel.
+config REGULATOR_S2DOS05
+ tristate "SLSI S2DOS05 regulator"
+ depends on I2C
+ help
+ This driver provides support for the voltage regulators of the S2DOS05.
+ The S2DOS05 is a companion power management IC for the smart phones.
+ The S2DOS05 handles LDO and BUCK control
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE || COMPILE_TEST
@@ -145,6 +145,7 @@ obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
+obj-$(CONFIG_REGULATOR_S2DOS05) += s2dos05.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
new file mode 100644
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * s2dos05.c - Regulator driver for the Samsung s2dos05
+ *
+ * Copyright (C) 2016 Samsung Electronics
+ * Copyright (C) 2023 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of_gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/s2dos05.h>
+#include <linux/i2c.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/debugfs.h>
+
+struct s2dos05_data {
+ struct s2dos05_dev *iodev;
+ int num_regulators;
+ struct regulator_dev *rdev[S2DOS05_REGULATOR_MAX];
+ int opmode[S2DOS05_REGULATOR_MAX];
+};
+
+int s2dos05_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_read_byte_data(i2c, reg);
+ mutex_unlock(&s2dos05->i2c_lock);
+ if (ret < 0) {
+ pr_info("%s:%s reg(0x%x), ret(%d)\n",
+ MFD_DEV_NAME, __func__, reg, ret);
+ return ret;
+ }
+
+ ret &= 0xff;
+ *dest = ret;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s2dos05_read_reg);
+
+int s2dos05_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_write_byte_data(i2c, reg, value);
+ mutex_unlock(&s2dos05->i2c_lock);
+ if (ret < 0)
+ pr_info("%s:%s reg(0x%x), ret(%d)\n",
+ MFD_DEV_NAME, __func__, reg, ret);
+
+ return ret;
+}
+
+int s2dos05_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+ u8 old_val, new_val;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_read_byte_data(i2c, reg);
+ if (ret >= 0) {
+ old_val = ret & 0xff;
+ new_val = (val & mask) | (old_val & (~mask));
+ ret = i2c_smbus_write_byte_data(i2c, reg, new_val);
+ }
+ mutex_unlock(&s2dos05->i2c_lock);
+ return ret;
+}
+
+int s2dos05_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
+ mutex_unlock(&s2dos05->i2c_lock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int s2dos05_read_word(struct i2c_client *i2c, u8 reg)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_read_word_data(i2c, reg);
+ mutex_unlock(&s2dos05->i2c_lock);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+int s2dos05_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
+{
+ struct s2dos05_dev *s2dos05 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&s2dos05->i2c_lock);
+ ret = i2c_smbus_write_i2c_block_data(i2c, reg, count, buf);
+ mutex_unlock(&s2dos05->i2c_lock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int s2dos05_regdump_show(struct seq_file *s, void *unused)
+{
+ struct s2dos05_dev *s2dos05_dev = s->private;
+ u8 i, val = 0;
+
+ for (i = S2DOS05_REG_STAT; i <= S2DOS05_REG_IRQ; i++) {
+ s2dos05_read_reg(s2dos05_dev->i2c, i, &val);
+ seq_printf(s, "0x%x: 0x%x\n", i, val);
+ }
+
+ return 0;
+}
+
+static int s2dos05_regdump_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, s2dos05_regdump_show, inode->i_private);
+}
+
+static const struct file_operations s2dos05_regdump_operations = {
+ .open = s2dos05_regdump_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void s2dos05_debugfs_init(struct s2dos05_dev *s2dos05)
+{
+ debugfs_create_file("s2dos05_regdump", 0440,
+ NULL, s2dos05, &s2dos05_regdump_operations);
+}
+#endif
+
+static int s2m_enable(struct regulator_dev *rdev)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+
+ return s2dos05_update_reg(i2c, rdev->desc->enable_reg,
+ info->opmode[rdev_get_id(rdev)],
+ rdev->desc->enable_mask);
+}
+
+static int s2m_disable_regmap(struct regulator_dev *rdev)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ u8 val;
+
+ if (rdev->desc->enable_is_inverted)
+ val = rdev->desc->enable_mask;
+ else
+ val = 0;
+
+ return s2dos05_update_reg(i2c, rdev->desc->enable_reg,
+ val, rdev->desc->enable_mask);
+}
+
+static int s2m_is_enabled_regmap(struct regulator_dev *rdev)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ int ret;
+ u8 val;
+
+ ret = s2dos05_read_reg(i2c, rdev->desc->enable_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ if (rdev->desc->enable_is_inverted)
+ return (val & rdev->desc->enable_mask) == 0;
+ else
+ return (val & rdev->desc->enable_mask) != 0;
+}
+
+static int s2m_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ int ret;
+ u8 val;
+
+ ret = s2dos05_read_reg(i2c, rdev->desc->vsel_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= rdev->desc->vsel_mask;
+
+ return val;
+}
+
+static int s2m_set_voltage_sel_regmap(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ int ret;
+
+ ret = s2dos05_update_reg(i2c, rdev->desc->vsel_reg,
+ sel, rdev->desc->vsel_mask);
+ if (ret < 0)
+ goto out;
+
+ if (rdev->desc->apply_bit)
+ ret = s2dos05_update_reg(i2c, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
+out:
+ pr_warn("%s: failed to set voltage_sel_regmap\n", rdev->desc->name);
+ return ret;
+}
+
+static int s2m_set_voltage_sel_regmap_buck(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ int ret;
+
+ ret = s2dos05_write_reg(i2c, rdev->desc->vsel_reg, sel);
+ if (ret < 0)
+ goto out;
+
+ if (rdev->desc->apply_bit)
+ ret = s2dos05_update_reg(i2c, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
+out:
+ pr_warn("%s: failed to set voltage_sel_regmap\n", rdev->desc->name);
+ return ret;
+}
+
+static int s2m_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ int old_volt, new_volt;
+
+ /* sanity check */
+ if (!rdev->desc->ops->list_voltage)
+ return -EINVAL;
+
+ old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
+ new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
+
+ if (old_selector < new_selector)
+ return DIV_ROUND_UP(new_volt - old_volt, S2DOS05_RAMP_DELAY);
+
+ return 0;
+}
+
+static int s2m_set_active_discharge(struct regulator_dev *rdev,
+ bool enable)
+{
+ struct s2dos05_data *info = rdev_get_drvdata(rdev);
+ struct i2c_client *i2c = info->iodev->i2c;
+ int ret;
+ u8 val;
+
+ if (enable)
+ val = rdev->desc->active_discharge_on;
+ else
+ val = rdev->desc->active_discharge_off;
+
+ ret = s2dos05_update_reg(i2c, rdev->desc->active_discharge_reg,
+ val, rdev->desc->active_discharge_mask);
+ return ret;
+}
+
+static const struct regulator_ops s2dos05_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = s2m_is_enabled_regmap,
+ .enable = s2m_enable,
+ .disable = s2m_disable_regmap,
+ .get_voltage_sel = s2m_get_voltage_sel_regmap,
+ .set_voltage_sel = s2m_set_voltage_sel_regmap,
+ .set_voltage_time_sel = s2m_set_voltage_time_sel,
+ .set_active_discharge = s2m_set_active_discharge,
+};
+
+static const struct regulator_ops s2dos05_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = s2m_is_enabled_regmap,
+ .enable = s2m_enable,
+ .disable = s2m_disable_regmap,
+ .get_voltage_sel = s2m_get_voltage_sel_regmap,
+ .set_voltage_sel = s2m_set_voltage_sel_regmap_buck,
+ .set_voltage_time_sel = s2m_set_voltage_time_sel,
+ .set_active_discharge = s2m_set_active_discharge,
+};
+
+#define _BUCK(macro) S2DOS05_BUCK##macro
+#define _buck_ops(num) s2dos05_buck_ops##num
+
+#define _LDO(macro) S2DOS05_LDO##macro
+#define _REG(ctrl) S2DOS05_REG##ctrl
+#define _ldo_ops(num) s2dos05_ldo_ops##num
+#define _MASK(macro) S2DOS05_ENABLE_MASK##macro
+#define _TIME(macro) S2DOS05_ENABLE_TIME##macro
+
+#define BUCK_DESC(_name, _id, _ops, m, s, v, e, em, t, a) { \
+ .name = _name, \
+ .id = _id, \
+ .ops = _ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = m, \
+ .uV_step = s, \
+ .n_voltages = S2DOS05_BUCK_N_VOLTAGES, \
+ .vsel_reg = v, \
+ .vsel_mask = S2DOS05_BUCK_VSEL_MASK, \
+ .enable_reg = e, \
+ .enable_mask = em, \
+ .enable_time = t, \
+ .active_discharge_off = 0, \
+ .active_discharge_on = S2DOS05_BUCK_FD_MASK, \
+ .active_discharge_reg = a, \
+ .active_discharge_mask = S2DOS05_BUCK_FD_MASK \
+}
+
+#define LDO_DESC(_name, _id, _ops, m, s, v, e, em, t, a) { \
+ .name = _name, \
+ .id = _id, \
+ .ops = _ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = m, \
+ .uV_step = s, \
+ .n_voltages = S2DOS05_LDO_N_VOLTAGES, \
+ .vsel_reg = v, \
+ .vsel_mask = S2DOS05_LDO_VSEL_MASK, \
+ .enable_reg = e, \
+ .enable_mask = em, \
+ .enable_time = t, \
+ .active_discharge_off = 0, \
+ .active_discharge_on = S2DOS05_LDO_FD_MASK, \
+ .active_discharge_reg = a, \
+ .active_discharge_mask = S2DOS05_LDO_FD_MASK \
+}
+
+static struct regulator_desc regulators[S2DOS05_REGULATOR_MAX] = {
+ /* name, id, ops, min_uv, uV_step, vsel_reg, enable_reg */
+ LDO_DESC("s2dos05-ldo1", _LDO(1), &_ldo_ops(), _LDO(_MIN1),
+ _LDO(_STEP1), _REG(_LDO1_CFG),
+ _REG(_EN), _MASK(_L1), _TIME(_LDO), _REG(_LDO1_CFG)),
+ LDO_DESC("s2dos05-ldo2", _LDO(2), &_ldo_ops(), _LDO(_MIN1),
+ _LDO(_STEP1), _REG(_LDO2_CFG),
+ _REG(_EN), _MASK(_L2), _TIME(_LDO), _REG(_LDO2_CFG)),
+ LDO_DESC("s2dos05-ldo3", _LDO(3), &_ldo_ops(), _LDO(_MIN2),
+ _LDO(_STEP1), _REG(_LDO3_CFG),
+ _REG(_EN), _MASK(_L3), _TIME(_LDO), _REG(_LDO3_CFG)),
+ LDO_DESC("s2dos05-ldo4", _LDO(4), &_ldo_ops(), _LDO(_MIN2),
+ _LDO(_STEP1), _REG(_LDO4_CFG),
+ _REG(_EN), _MASK(_L4), _TIME(_LDO), _REG(_LDO4_CFG)),
+ BUCK_DESC("s2dos05-buck1", _BUCK(1), &_buck_ops(), _BUCK(_MIN1),
+ _BUCK(_STEP1), _REG(_BUCK_VOUT),
+ _REG(_EN), _MASK(_B1), _TIME(_BUCK), _REG(_BUCK_CFG)),
+};
+
+#ifdef CONFIG_OF
+static int s2dos05_pmic_dt_parse_pdata(struct device *dev,
+ struct s2dos05_platform_data *pdata)
+{
+ struct device_node *pmic_np, *regulators_np, *reg_np;
+ struct s2dos05_regulator_data *rdata;
+ unsigned int i;
+
+ pmic_np = dev->of_node;
+ if (!pmic_np) {
+ dev_err(dev, "could not find pmic sub-node\n");
+ return -ENODEV;
+ }
+
+ pdata->dp_irq = of_get_named_gpio(pmic_np, "s2dos05,s2dos05_int", 0);
+ if (pdata->dp_irq < 0)
+ pr_err("%s error reading s2dos05_irq = %d\n",
+ __func__, pdata->dp_irq);
+
+ pdata->wakeup = of_property_read_bool(pmic_np, "s2dos05,wakeup");
+
+ regulators_np = of_find_node_by_name(pmic_np, "regulators");
+ if (!regulators_np) {
+ dev_err(dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ /* count the number of regulators to be supported in pmic */
+ pdata->num_regulators = 0;
+ for_each_child_of_node(regulators_np, reg_np) {
+ pdata->num_regulators++;
+ }
+
+ rdata = devm_kzalloc(dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata)
+ return -ENOMEM;
+
+ pdata->regulators = rdata;
+ for_each_child_of_node(regulators_np, reg_np) {
+ for (i = 0; i < ARRAY_SIZE(regulators); i++)
+ if (!of_node_cmp(reg_np->name,
+ regulators[i].name))
+ break;
+
+ if (i == ARRAY_SIZE(regulators)) {
+ dev_warn(dev,
+ "don't know how to configure regulator %s\n",
+ reg_np->name);
+ continue;
+ }
+
+ rdata->id = i;
+ rdata->initdata = of_get_regulator_init_data(
+ dev, reg_np,
+ ®ulators[i]);
+ rdata->reg_node = reg_np;
+ rdata++;
+ }
+ of_node_put(regulators_np);
+
+ return 0;
+}
+#else
+static int s2dos05_pmic_dt_parse_pdata(struct s2dos05_dev *iodev,
+ struct s2dos05_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static int s2dos05_pmic_probe(struct i2c_client *i2c)
+{
+ struct s2dos05_dev *iodev;
+ struct device *dev = &i2c->dev;
+ struct s2dos05_platform_data *pdata = i2c->dev.platform_data;
+ struct regulator_config config = { };
+ struct s2dos05_data *s2dos05;
+ int i;
+ int ret = 0;
+
+ pr_info("%s:%s\n", MFD_DEV_NAME, __func__);
+
+ iodev = kzalloc(sizeof(struct s2dos05_dev), GFP_KERNEL);
+ if (!iodev)
+ return -ENOMEM;
+
+ if (i2c->dev.of_node) {
+ pdata = devm_kzalloc(&i2c->dev,
+ sizeof(struct s2dos05_platform_data), GFP_KERNEL);
+ if (!pdata) {
+ ret = -ENOMEM;
+ goto err_pdata;
+ }
+ ret = s2dos05_pmic_dt_parse_pdata(&i2c->dev, pdata);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to get device of_node\n");
+ goto err_dt;
+ }
+
+ i2c->dev.platform_data = pdata;
+ } else
+ pdata = i2c->dev.platform_data;
+
+ iodev->dev = &i2c->dev;
+ iodev->i2c = i2c;
+
+ if (pdata) {
+ iodev->pdata = pdata;
+ iodev->wakeup = pdata->wakeup;
+ } else {
+ ret = -EINVAL;
+ goto err_dt;
+ }
+ mutex_init(&iodev->i2c_lock);
+ i2c_set_clientdata(i2c, iodev);
+
+ s2dos05 = devm_kzalloc(&i2c->dev, sizeof(struct s2dos05_data),
+ GFP_KERNEL);
+ if (!s2dos05) {
+ ret = -EINVAL;
+ goto err_data;
+ }
+
+ s2dos05->iodev = iodev;
+ s2dos05->num_regulators = pdata->num_regulators;
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ int id = pdata->regulators[i].id;
+
+ config.dev = &i2c->dev;
+ config.init_data = pdata->regulators[i].initdata;
+ config.driver_data = s2dos05;
+ config.of_node = pdata->regulators[i].reg_node;
+ s2dos05->opmode[id] = regulators[id].enable_mask;
+ s2dos05->rdev[i] = regulator_register(dev, ®ulators[id], &config);
+ if (IS_ERR(s2dos05->rdev[i])) {
+ ret = PTR_ERR(s2dos05->rdev[i]);
+ dev_err(&i2c->dev, "regulator init failed for %d\n",
+ id);
+ s2dos05->rdev[i] = NULL;
+ goto err_rdata;
+ }
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ s2dos05_debugfs_init(iodev);
+#endif
+
+ return ret;
+
+err_rdata:
+ pr_info("[%s:%d] err:\n", __FILE__, __LINE__);
+ for (i = 0; i < s2dos05->num_regulators; i++)
+ if (s2dos05->rdev[i])
+ regulator_unregister(s2dos05->rdev[i]);
+err_data:
+ mutex_destroy(&iodev->i2c_lock);
+ devm_kfree(&i2c->dev, (void *)s2dos05);
+err_dt:
+ devm_kfree(&i2c->dev, (void *)pdata);
+err_pdata:
+ kfree(iodev);
+
+ return ret;
+}
+
+static void s2dos05_pmic_remove(struct i2c_client *i2c)
+{
+ struct s2dos05_data *s2dos05 = i2c_get_clientdata(i2c);
+ int i;
+
+ for (i = 0; i < s2dos05->num_regulators; i++)
+ if (s2dos05->rdev[i])
+ regulator_unregister(s2dos05->rdev[i]);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id s2dos05_i2c_dt_ids[] = {
+ { .compatible = "samsung,s2dos05" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, s2dos05_i2c_dt_ids);
+#endif /* CONFIG_OF */
+
+#if defined(CONFIG_OF)
+static const struct i2c_device_id s2dos05_pmic_id[] = {
+ {"s2dos05", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, s2dos05_pmic_id);
+#endif /* CONFIG_OF */
+
+static struct i2c_driver s2dos05_i2c_driver = {
+ .driver = {
+ .name = "s2dos05",
+#if defined(CONFIG_OF)
+ .of_match_table = s2dos05_i2c_dt_ids,
+#endif /* CONFIG_OF */
+ .suppress_bind_attrs = true,
+ },
+ .probe = s2dos05_pmic_probe,
+ .remove = s2dos05_pmic_remove,
+ .id_table = s2dos05_pmic_id,
+};
+module_i2c_driver(s2dos05_i2c_driver);
+
+MODULE_DESCRIPTION("SAMSUNG s2dos05 Regulator Driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ * s2dos05.h
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ */
+
+#ifndef __LINUX_MFD_S2DOS05_H
+#define __LINUX_MFD_S2DOS05_H
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MFD_DEV_NAME "s2dos05"
+
+/**
+ * sec_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (constraints, supplies, ...)
+ */
+
+struct s2dos05_dev {
+ struct device *dev;
+ struct i2c_client *i2c; /* 0xB2; PMIC, Flash LED */
+ struct mutex i2c_lock;
+
+ int type;
+ u8 rev_num; /* pmic Rev */
+ bool wakeup;
+ int dp_irq;
+ int adc_mode;
+ int adc_sync_mode;
+ u8 adc_en_val;
+
+ struct s2dos05_platform_data *pdata;
+};
+
+struct s2dos05_regulator_data {
+ int id;
+ struct regulator_init_data *initdata;
+ struct device_node *reg_node;
+};
+
+struct s2dos05_platform_data {
+ bool wakeup;
+ int num_regulators;
+ struct s2dos05_regulator_data *regulators;
+ int device_type;
+ int dp_irq;
+
+ /* adc_mode
+ * 0 : not use
+ * 1 : current meter
+ * 2 : power meter
+ */
+ int adc_mode;
+ /* 1 : sync mode, 2 : async mode */
+ int adc_sync_mode;
+};
+
+struct s2dos05 {
+ struct regmap *regmap;
+};
+
+/* S2DOS05 registers */
+/* Slave Addr : 0xC0 */
+enum S2DOS05_reg {
+ S2DOS05_REG_DEV_ID,
+ S2DOS05_REG_TOPSYS_STAT,
+ S2DOS05_REG_STAT,
+ S2DOS05_REG_EN,
+ S2DOS05_REG_LDO1_CFG,
+ S2DOS05_REG_LDO2_CFG,
+ S2DOS05_REG_LDO3_CFG,
+ S2DOS05_REG_LDO4_CFG,
+ S2DOS05_REG_BUCK_CFG,
+ S2DOS05_REG_BUCK_VOUT,
+ S2DOS05_REG_IRQ_MASK = 0x0D,
+ S2DOS05_REG_SSD_TSD = 0x0E,
+ S2DOS05_REG_OCL = 0x10,
+ S2DOS05_REG_IRQ = 0x11
+};
+
+/* S2DOS05 regulator ids */
+enum S2DOS05_regulators {
+ S2DOS05_LDO1,
+ S2DOS05_LDO2,
+ S2DOS05_LDO3,
+ S2DOS05_LDO4,
+ S2DOS05_BUCK1,
+ S2DOS05_REG_MAX,
+};
+
+#define S2DOS05_IRQ_PWRMT_MASK (1 << 5)
+#define S2DOS05_IRQ_TSD_MASK (1 << 4)
+#define S2DOS05_IRQ_SSD_MASK (1 << 3)
+#define S2DOS05_IRQ_SCP_MASK (1 << 2)
+#define S2DOS05_IRQ_UVLO_MASK (1 << 1)
+#define S2DOS05_IRQ_OCD_MASK (1 << 0)
+
+#define S2DOS05_BUCK_MIN1 506250
+#define S2DOS05_LDO_MIN1 1500000
+#define S2DOS05_LDO_MIN2 2700000
+#define S2DOS05_BUCK_STEP1 6250
+#define S2DOS05_LDO_STEP1 25000
+#define S2DOS05_LDO_VSEL_MASK 0x7F
+#define S2DOS05_LDO_FD_MASK 0x80
+#define S2DOS05_BUCK_VSEL_MASK 0xFF
+#define S2DOS05_BUCK_FD_MASK 0x08
+
+#define S2DOS05_ENABLE_MASK_L1 (1 << 0)
+#define S2DOS05_ENABLE_MASK_L2 (1 << 1)
+#define S2DOS05_ENABLE_MASK_L3 (1 << 2)
+#define S2DOS05_ENABLE_MASK_L4 (1 << 3)
+#define S2DOS05_ENABLE_MASK_B1 (1 << 4)
+
+#define S2DOS05_RAMP_DELAY 12000
+
+#define S2DOS05_ENABLE_TIME_LDO 50
+#define S2DOS05_ENABLE_TIME_BUCK 350
+
+#define S2DOS05_ENABLE_SHIFT 0x06
+#define S2DOS05_LDO_N_VOLTAGES (S2DOS05_LDO_VSEL_MASK + 1)
+#define S2DOS05_BUCK_N_VOLTAGES (S2DOS05_BUCK_VSEL_MASK + 1)
+
+#define S2DOS05_PMIC_EN_SHIFT 6
+#define S2DOS05_REGULATOR_MAX (S2DOS05_REG_MAX)
+
+/* ----------power meter ----------*/
+#define S2DOS05_REG_PWRMT_CTRL1 0x0A
+#define S2DOS05_REG_PWRMT_CTRL2 0x0B
+#define S2DOS05_REG_PWRMT_DATA 0x0C
+#define S2DOS05_REG_IRQ_MASK 0x0D
+
+#define CURRENT_ELVDD 2450
+#define CURRENT_ELVSS 2450
+#define CURRENT_AVDD 612
+#define CURRENT_BUCK 1220
+#define CURRENT_L1 2000
+#define CURRENT_L2 2000
+#define CURRENT_L3 2000
+#define CURRENT_L4 2000
+
+#define POWER_ELVDD 24500
+#define POWER_ELVSS 24500
+#define POWER_AVDD 3060
+#define POWER_BUCK 1525
+#define POWER_L1 5000
+#define POWER_L2 5000
+#define POWER_L3 5000
+#define POWER_L4 5000
+
+#define ADC_EN_MASK 0x80
+#define ADC_ASYNCRD_MASK 0x80
+#define ADC_PTR_MASK 0x0F
+#define ADC_PGEN_MASK 0x30
+#define CURRENT_MODE 0x00
+#define POWER_MODE 0x10
+#define RAWCURRENT_MODE 0x20
+#define SMPNUM_MASK 0x0F
+
+#define S2DOS05_MAX_ADC_CHANNEL 8
+
+void s2dos05_powermeter_init(struct s2dos05_dev *s2dos05);
+void s2dos05_powermeter_deinit(struct s2dos05_dev *s2dos05);
+
+/* S2DOS05 shared i2c API function */
+int s2dos05_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+int s2dos05_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
+int s2dos05_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
+
+
+#endif /* __LINUX_MFD_S2DOS05_H */