@@ -52,6 +52,8 @@ config LAN743X
select I2C_PCI1XXXX
select GP_PCI1XXXX
select SFP
+ select PCS_XPCS
+ select PHYLINK
help
Support for the Microchip LAN743x and PCI11x1x families of PCI
Express Ethernet devices
@@ -19,6 +19,7 @@
#include <linux/gpio/machine.h>
#include <linux/auxiliary_bus.h>
#include <linux/platform_device.h>
+#include <linux/pcs/pcs-xpcs.h>
#include "lan743x_main.h"
#include "lan743x_ethtool.h"
@@ -1173,6 +1174,28 @@ static int lan743x_get_lsd(int speed, int duplex, u8 mss)
return lsd;
}
+static int pci11x1x_pcs_read(struct mii_bus *bus, int addr, int devnum,
+ int regnum)
+{
+ struct lan743x_adapter *adapter = bus->priv;
+
+ if (addr)
+ return -EOPNOTSUPP;
+
+ return lan743x_sgmii_read(adapter, devnum, regnum);
+}
+
+static int pci11x1x_pcs_write(struct mii_bus *bus, int addr, int devnum,
+ int regnum, u16 val)
+{
+ struct lan743x_adapter *adapter = bus->priv;
+
+ if (addr)
+ return -EOPNOTSUPP;
+
+ return lan743x_sgmii_write(adapter, devnum, regnum, val);
+}
+
static int lan743x_sgmii_mpll_set(struct lan743x_adapter *adapter,
u16 baud)
{
@@ -1241,73 +1264,6 @@ static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter,
return 0;
}
-static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter)
-{
- enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd;
- int mii_ctrl;
- int dgt_ctrl;
- int an_ctrl;
- int ret;
-
- if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE)
- /* Switch to 2.5 Gbps */
- ret = lan743x_sgmii_2_5G_mode_set(adapter, true);
- else
- /* Switch to 10/100/1000 Mbps clock */
- ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
- if (ret < 0)
- return ret;
-
- /* Enable SGMII Auto NEG */
- mii_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
- if (mii_ctrl < 0)
- return mii_ctrl;
-
- an_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, VR_MII_AN_CTRL);
- if (an_ctrl < 0)
- return an_ctrl;
-
- dgt_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
- VR_MII_DIG_CTRL1);
- if (dgt_ctrl < 0)
- return dgt_ctrl;
-
- if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE) {
- mii_ctrl &= ~(BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100);
- mii_ctrl |= BMCR_SPEED1000;
- dgt_ctrl |= VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
- dgt_ctrl &= ~VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
- /* In order for Auto-Negotiation to operate properly at
- * 2.5 Gbps the 1.6ms link timer values must be adjusted
- * The VR_MII_LINK_TIMER_CTRL Register must be set to
- * 16'h7A1 and The CL37_TMR_OVR_RIDE bit of the
- * VR_MII_DIG_CTRL1 Register set to 1
- */
- ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
- VR_MII_LINK_TIMER_CTRL, 0x7A1);
- if (ret < 0)
- return ret;
- } else {
- mii_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- an_ctrl &= ~VR_MII_AN_CTRL_SGMII_LINK_STS_;
- dgt_ctrl &= ~VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
- dgt_ctrl |= VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
- }
-
- ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR,
- mii_ctrl);
- if (ret < 0)
- return ret;
-
- ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
- VR_MII_DIG_CTRL1, dgt_ctrl);
- if (ret < 0)
- return ret;
-
- return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
- VR_MII_AN_CTRL, an_ctrl);
-}
-
static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
{
u8 wait_cnt = 0;
@@ -1356,49 +1312,6 @@ static int lan743x_pcs_power_reset(struct lan743x_adapter *adapter)
return lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
}
-static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct phy_device *phydev = netdev->phydev;
- bool status;
- int ret;
-
- ret = lan743x_get_lsd(phydev->speed, phydev->duplex,
- phydev->master_slave_state);
- if (ret < 0) {
- netif_err(adapter, drv, adapter->netdev,
- "error %d link-speed-duplex(LSD) invalid\n", ret);
- return ret;
- }
-
- adapter->sgmii_lsd = ret;
- netif_dbg(adapter, drv, adapter->netdev,
- "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
-
- ret = lan743x_sgmii_aneg_update(adapter);
- if (ret < 0) {
- netif_err(adapter, drv, adapter->netdev,
- "error %d SGMII cfg failed\n", ret);
- return ret;
- }
-
- ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
- if (ret < 0) {
- netif_err(adapter, drv, adapter->netdev,
- "erro %d SGMII get mode failed\n", ret);
- return ret;
- }
-
- if (status)
- netif_dbg(adapter, drv, adapter->netdev,
- "SGMII 2.5G mode enable\n");
- else
- netif_dbg(adapter, drv, adapter->netdev,
- "SGMII 1G mode enable\n");
-
- return lan743x_pcs_power_reset(adapter);
-}
-
static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
u8 *addr)
{
@@ -1535,113 +1448,6 @@ static int lan743x_mac_set_mtu(struct lan743x_adapter *adapter, int new_mtu)
return 0;
}
-/* PHY */
-static int lan743x_phy_reset(struct lan743x_adapter *adapter)
-{
- u32 data;
-
- /* Only called with in probe, and before mdiobus_register */
-
- data = lan743x_csr_read(adapter, PMT_CTL);
- data |= PMT_CTL_ETH_PHY_RST_;
- lan743x_csr_write(adapter, PMT_CTL, data);
-
- return readx_poll_timeout(LAN743X_CSR_READ_OP, PMT_CTL, data,
- (!(data & PMT_CTL_ETH_PHY_RST_) &&
- (data & PMT_CTL_READY_)),
- 50000, 1000000);
-}
-
-static void lan743x_phy_update_flowcontrol(struct lan743x_adapter *adapter,
- u16 local_adv, u16 remote_adv)
-{
- struct lan743x_phy *phy = &adapter->phy;
- u8 cap;
-
- if (phy->fc_autoneg)
- cap = mii_resolve_flowctrl_fdx(local_adv, remote_adv);
- else
- cap = phy->fc_request_control;
-
- lan743x_mac_flow_ctrl_set_enables(adapter,
- cap & FLOW_CTRL_TX,
- cap & FLOW_CTRL_RX);
-}
-
-static int lan743x_phy_init(struct lan743x_adapter *adapter)
-{
- return lan743x_phy_reset(adapter);
-}
-
-static void lan743x_phy_link_status_change(struct net_device *netdev)
-{
- struct lan743x_adapter *adapter = netdev_priv(netdev);
- struct phy_device *phydev = netdev->phydev;
- u32 data;
-
- phy_print_status(phydev);
- if (phydev->state == PHY_RUNNING) {
- int remote_advertisement = 0;
- int local_advertisement = 0;
-
- data = lan743x_csr_read(adapter, MAC_CR);
-
- /* set duplex mode */
- if (phydev->duplex)
- data |= MAC_CR_DPX_;
- else
- data &= ~MAC_CR_DPX_;
-
- /* set bus speed */
- switch (phydev->speed) {
- case SPEED_10:
- data &= ~MAC_CR_CFG_H_;
- data &= ~MAC_CR_CFG_L_;
- break;
- case SPEED_100:
- data &= ~MAC_CR_CFG_H_;
- data |= MAC_CR_CFG_L_;
- break;
- case SPEED_1000:
- data |= MAC_CR_CFG_H_;
- data &= ~MAC_CR_CFG_L_;
- break;
- case SPEED_2500:
- data |= MAC_CR_CFG_H_;
- data |= MAC_CR_CFG_L_;
- break;
- }
- lan743x_csr_write(adapter, MAC_CR, data);
-
- local_advertisement =
- linkmode_adv_to_mii_adv_t(phydev->advertising);
- remote_advertisement =
- linkmode_adv_to_mii_adv_t(phydev->lp_advertising);
-
- lan743x_phy_update_flowcontrol(adapter, local_advertisement,
- remote_advertisement);
- lan743x_ptp_update_latency(adapter, phydev->speed);
- if (phydev->interface == PHY_INTERFACE_MODE_SGMII ||
- phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
- phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
- lan743x_sgmii_config(adapter);
- }
-}
-
-static void lan743x_phy_close(struct lan743x_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct phy_device *phydev = netdev->phydev;
-
- phy_stop(netdev->phydev);
- phy_disconnect(netdev->phydev);
-
- /* using phydev here as phy_disconnect NULLs netdev->phydev */
- if (phy_is_pseudo_fixed_link(phydev))
- fixed_phy_unregister(phydev);
-
-}
-
static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
{
u32 id_rev;
@@ -1650,7 +1456,11 @@ static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
data = lan743x_csr_read(adapter, MAC_CR);
id_rev = adapter->csr.id_rev & ID_REV_ID_MASK_;
- if (adapter->is_pci11x1x && adapter->is_sgmii_en)
+ if (adapter->is_pci11x1x &&
+ adapter->is_sgmii_en &&
+ adapter->is_sfp_support_en)
+ adapter->phy_interface = PHY_INTERFACE_MODE_2500BASEX;
+ else if (adapter->is_pci11x1x && adapter->is_sgmii_en)
adapter->phy_interface = PHY_INTERFACE_MODE_SGMII;
else if (id_rev == ID_REV_ID_LAN7430_)
adapter->phy_interface = PHY_INTERFACE_MODE_GMII;
@@ -1658,65 +1468,9 @@ static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
adapter->phy_interface = PHY_INTERFACE_MODE_MII;
else
adapter->phy_interface = PHY_INTERFACE_MODE_RGMII;
-}
-
-static int lan743x_phy_open(struct lan743x_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct lan743x_phy *phy = &adapter->phy;
- struct fixed_phy_status fphy_status = {
- .link = 1,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
- };
- struct phy_device *phydev;
- int ret = -EIO;
-
- /* try devicetree phy, or fixed link */
- phydev = of_phy_get_and_connect(netdev, adapter->pdev->dev.of_node,
- lan743x_phy_link_status_change);
-
- if (!phydev) {
- /* try internal phy */
- phydev = phy_find_first(adapter->mdiobus);
- if (!phydev) {
- if ((adapter->csr.id_rev & ID_REV_ID_MASK_) ==
- ID_REV_ID_LAN7431_) {
- phydev = fixed_phy_register(PHY_POLL,
- &fphy_status, NULL);
- if (IS_ERR(phydev)) {
- netdev_err(netdev, "No PHY/fixed_PHY found\n");
- return PTR_ERR(phydev);
- }
- } else {
- goto return_error;
- }
- }
-
- lan743x_phy_interface_select(adapter);
-
- ret = phy_connect_direct(netdev, phydev,
- lan743x_phy_link_status_change,
- adapter->phy_interface);
- if (ret)
- goto return_error;
- }
-
- /* MAC doesn't support 1000T Half */
- phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-
- /* support both flow controls */
- phy_support_asym_pause(phydev);
- phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
- phy->fc_autoneg = phydev->autoneg;
-
- phy_start(phydev);
- phy_start_aneg(phydev);
- phy_attached_info(phydev);
- return 0;
-return_error:
- return ret;
+ netif_dbg(adapter, drv, adapter->netdev,
+ "selected phy interface: 0x%X\n", adapter->phy_interface);
}
static void lan743x_rfe_open(struct lan743x_adapter *adapter)
@@ -3283,6 +3037,375 @@ static int lan743x_sfp_register(struct lan743x_adapter *adapter)
return 0;
}
+void lan743x_mac_cfg_update(struct lan743x_adapter *adapter, bool link,
+ int speed, const unsigned long *advertise)
+{
+ int mac_cr;
+
+ mac_cr = lan743x_csr_read(adapter, MAC_CR);
+ mac_cr &= ~(MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+ if (link) {
+ if (speed == SPEED_2500)
+ mac_cr |= (MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+ else if (speed == SPEED_1000)
+ mac_cr |= (MAC_CR_CFG_H_);
+ else if (speed == SPEED_100)
+ mac_cr |= (MAC_CR_CFG_L_);
+ } else if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, advertise) ||
+ test_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, advertise)) {
+ mac_cr |= (MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+ adapter->sgmii_lsd = LINK_2500_MASTER;
+ } else if (test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise) ||
+ test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, advertise)) {
+ mac_cr |= (MAC_CR_CFG_H_);
+ adapter->sgmii_lsd = LINK_1000_MASTER;
+ } else if (test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, advertise) ||
+ test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, advertise) ||
+ test_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, advertise) ||
+ test_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, advertise)) {
+ mac_cr |= (MAC_CR_CFG_L_);
+ adapter->sgmii_lsd = LINK_1000_MASTER;
+ } else {
+ adapter->sgmii_lsd = LINK_1000_MASTER;
+ }
+
+ lan743x_csr_write(adapter, MAC_CR, mac_cr);
+}
+
+static int lan743x_phylink_sgmii_config(struct lan743x_adapter *adapter)
+{
+ int ret;
+
+ ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL,
+ MASTER_SLAVE_STATE_MASTER);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "error %d link-speed-duplex(LSD) invalid\n", ret);
+ return ret;
+ }
+
+ adapter->sgmii_lsd = ret;
+ netif_dbg(adapter, drv, adapter->netdev,
+ "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+ /* Switch to serial bit rate of 1.25 Gbps */
+ ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_pcs_power_reset(adapter);
+}
+
+static int lan743x_phylink_1000basex_config(struct lan743x_adapter *adapter)
+{
+ u32 sgmii_ctl;
+ int ret;
+
+ ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL,
+ MASTER_SLAVE_STATE_MASTER);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "error %d link-speed-duplex(LSD) invalid\n", ret);
+ return ret;
+ }
+
+ adapter->sgmii_lsd = ret;
+ netif_dbg(adapter, drv, adapter->netdev,
+ "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+ /* LINK_STATUS_SOURCE 1000BASE-X PCS link status */
+ sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+ sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_;
+ lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
+ sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+
+ /* Switch to serial bit rate of 1.25 Gbps */
+ ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_pcs_power_reset(adapter);
+}
+
+static int lan743x_phylink_2500basex_config(struct lan743x_adapter *adapter)
+{
+ u32 sgmii_ctl;
+ int ret;
+
+ ret = lan743x_get_lsd(SPEED_2500, DUPLEX_FULL,
+ MASTER_SLAVE_STATE_MASTER);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "error %d link-speed-duplex(LSD) invalid\n", ret);
+ return ret;
+ }
+
+ adapter->sgmii_lsd = ret;
+ netif_dbg(adapter, drv, adapter->netdev,
+ "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+ /* LINK_STATUS_SOURCE 2500BASE-X PCS link status */
+ sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+ sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_;
+ lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
+ sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+
+ /* Switch to serial bit rate of 3.125 Gbps */
+ ret = lan743x_sgmii_2_5G_mode_set(adapter, true);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_pcs_power_reset(adapter);
+}
+
+static struct phylink_pcs *lan743x_phylink_mac_select(struct phylink_config *config,
+ phy_interface_t interface)
+{
+ struct net_device *netdev = to_net_dev(config->dev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->xpcs)
+ return &adapter->xpcs->pcs;
+
+ return NULL;
+}
+
+static void lan743x_phylink_mac_config(struct phylink_config *config,
+ unsigned int link_an_mode,
+ const struct phylink_link_state *state)
+{
+ struct net_device *netdev = to_net_dev(config->dev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ bool status;
+ int ret;
+
+ lan743x_mac_cfg_update(adapter, state->link, state->speed,
+ state->advertising);
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_2500BASEX:
+ lan743x_phylink_2500basex_config(adapter);
+ break;
+ case PHY_INTERFACE_MODE_1000BASEX:
+ lan743x_phylink_1000basex_config(adapter);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ lan743x_phylink_sgmii_config(adapter);
+ break;
+ default:
+ netif_dbg(adapter, drv, adapter->netdev,
+ "RGMII/GMII/MII mode enable\n");
+ return;
+ }
+
+ ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
+ if (ret < 0)
+ netif_err(adapter, drv, adapter->netdev,
+ "erro %d SGMII get mode failed\n", ret);
+
+ if (status)
+ netif_dbg(adapter, drv, adapter->netdev,
+ "SGMII 2.5G mode enable\n");
+ else
+ netif_dbg(adapter, drv, adapter->netdev,
+ "SGMII 1G mode enable\n");
+}
+
+static void lan743x_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int link_an_mode,
+ phy_interface_t interface)
+{
+ netif_tx_stop_all_queues(to_net_dev(config->dev));
+}
+
+static void lan743x_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
+ unsigned int link_an_mode,
+ phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ struct net_device *netdev = to_net_dev(config->dev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ struct lan743x_phy *phy = &adapter->phy;
+ u32 remote_adv;
+ u32 local_adv;
+ u8 cap = 0;
+ int mac_cr;
+
+ mac_cr = lan743x_csr_read(adapter, MAC_CR);
+ mac_cr &= ~(MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+ if (speed == SPEED_2500)
+ mac_cr |= (MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+ else if (speed == SPEED_1000)
+ mac_cr |= (MAC_CR_CFG_H_);
+ else if (speed == SPEED_100)
+ mac_cr |= (MAC_CR_CFG_L_);
+
+ lan743x_csr_write(adapter, MAC_CR, mac_cr);
+
+ /* Flow Control operation */
+ if (phydev) {
+ local_adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
+ remote_adv = linkmode_adv_to_mii_adv_t(phydev->lp_advertising);
+
+ if (phy->fc_autoneg)
+ cap = mii_resolve_flowctrl_fdx(local_adv, remote_adv);
+ else
+ cap = phy->fc_request_control;
+ } else {
+ if (tx_pause)
+ cap |= FLOW_CTRL_TX;
+ if (rx_pause)
+ cap |= FLOW_CTRL_RX;
+ }
+
+ lan743x_mac_flow_ctrl_set_enables(adapter,
+ cap & FLOW_CTRL_TX,
+ cap & FLOW_CTRL_RX);
+
+ lan743x_rfe_update_mac_address(adapter);
+
+ netif_tx_wake_all_queues(to_net_dev(config->dev));
+}
+
+static const struct phylink_mac_ops lan743x_phylink_mac_ops = {
+ .mac_select_pcs = lan743x_phylink_mac_select,
+ .mac_config = lan743x_phylink_mac_config,
+ .mac_link_down = lan743x_phylink_mac_link_down,
+ .mac_link_up = lan743x_phylink_mac_link_up,
+};
+
+static int lan743x_phylink_create(struct net_device *netdev)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ struct fwnode_handle *fwnode = NULL;
+ struct phylink *phylink;
+ int ret;
+
+ adapter->phylink_config.dev = &netdev->dev;
+ adapter->phylink_config.type = PHYLINK_NETDEV;
+ adapter->phylink_config.mac_managed_pm = true;
+
+ adapter->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
+ MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD | MAC_2500FD;
+
+ /* Config serdes Interface */
+ if (adapter->phy_interface == PHY_INTERFACE_MODE_NA)
+ lan743x_phy_interface_select(adapter);
+
+ if (adapter->is_sgmii_en) {
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ adapter->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ adapter->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ adapter->phylink_config.supported_interfaces);
+ } else {
+ switch (adapter->phy_interface) {
+ case PHY_INTERFACE_MODE_GMII:
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ adapter->phylink_config.supported_interfaces);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ adapter->phylink_config.supported_interfaces);
+ break;
+ default:
+ __set_bit(PHY_INTERFACE_MODE_RGMII,
+ adapter->phylink_config.supported_interfaces);
+ }
+ }
+
+ if (adapter->nodes) {
+ fwnode = software_node_fwnode(adapter->nodes->group[SWNODE_PHYLINK]);
+ if (!fwnode)
+ return -ENODEV;
+ }
+
+ phylink = phylink_create(&adapter->phylink_config,
+ fwnode,
+ adapter->phy_interface,
+ &lan743x_phylink_mac_ops);
+
+ if (IS_ERR(phylink)) {
+ ret = PTR_ERR(phylink);
+ netdev_err(netdev, "Could not create phylink (%pe)\n", phylink);
+ return ret;
+ }
+
+ adapter->phylink = phylink;
+ netdev_dbg(netdev, "lan743x phylink created");
+
+ return 0;
+}
+
+static bool lan743x_phy_handle_exists(struct device_node *dn)
+{
+ dn = of_parse_phandle(dn, "phy-handle", 0);
+ of_node_put(dn);
+ if (IS_ERR(dn))
+ return false;
+
+ return true;
+}
+
+static int lan743x_phylink_connect(struct lan743x_adapter *adapter)
+{
+ struct device_node *dn = adapter->pdev->dev.of_node;
+ struct net_device *dev = adapter->netdev;
+ struct fixed_phy_status fphy_status = {
+ .link = 1,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ };
+ struct phy_device *phydev;
+ int ret;
+
+ if (!adapter->is_sfp_support_en) {
+ if (dn)
+ ret = phylink_of_phy_connect(adapter->phylink, dn, 0);
+
+ if (!dn || (ret && !lan743x_phy_handle_exists(dn))) {
+ phydev = phy_find_first(adapter->mdiobus);
+ if (!phydev) {
+ if ((adapter->csr.id_rev & ID_REV_ID_MASK_) ==
+ ID_REV_ID_LAN7431_) {
+ phydev = fixed_phy_register(PHY_POLL,
+ &fphy_status,
+ NULL);
+ if (IS_ERR(phydev)) {
+ netdev_err(dev,
+ "No PHY/fixed_PHY found\n");
+ return PTR_ERR(phydev);
+ }
+ } else {
+ netdev_err(dev, "no PHY found\n");
+ return -ENXIO;
+ }
+ }
+
+ /* attach the mac to the phy */
+ ret = phylink_connect_phy(adapter->phylink, phydev);
+ }
+
+ if (ret) {
+ netdev_err(dev, "Could not attach PHY (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ phylink_start(adapter->phylink);
+
+ return 0;
+}
+
+static void lan743x_phylink_close(struct lan743x_adapter *adapter)
+{
+ phylink_stop(adapter->phylink);
+ phylink_disconnect_phy(adapter->phylink);
+}
+
static int lan743x_netdev_close(struct net_device *netdev)
{
struct lan743x_adapter *adapter = netdev_priv(netdev);
@@ -3296,7 +3419,7 @@ static int lan743x_netdev_close(struct net_device *netdev)
lan743x_ptp_close(adapter);
- lan743x_phy_close(adapter);
+ lan743x_phylink_close(adapter);
lan743x_mac_close(adapter);
@@ -3319,13 +3442,13 @@ static int lan743x_netdev_open(struct net_device *netdev)
if (ret)
goto close_intr;
- ret = lan743x_phy_open(adapter);
+ ret = lan743x_phylink_connect(adapter);
if (ret)
goto close_mac;
ret = lan743x_ptp_open(adapter);
if (ret)
- goto close_phy;
+ goto close_phylink;
lan743x_rfe_open(adapter);
@@ -3355,8 +3478,8 @@ static int lan743x_netdev_open(struct net_device *netdev)
}
lan743x_ptp_close(adapter);
-close_phy:
- lan743x_phy_close(adapter);
+close_phylink:
+ lan743x_phylink_close(adapter);
close_mac:
lan743x_mac_close(adapter);
@@ -3385,11 +3508,14 @@ static netdev_tx_t lan743x_netdev_xmit_frame(struct sk_buff *skb,
static int lan743x_netdev_ioctl(struct net_device *netdev,
struct ifreq *ifr, int cmd)
{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
if (!netif_running(netdev))
return -EINVAL;
if (cmd == SIOCSHWTSTAMP)
return lan743x_ptp_ioctl(netdev, ifr, cmd);
- return phy_mii_ioctl(netdev->phydev, ifr, cmd);
+
+ return phylink_mii_ioctl(adapter->phylink, ifr, cmd);
}
static void lan743x_netdev_set_multicast(struct net_device *netdev)
@@ -3491,6 +3617,9 @@ static void lan743x_hardware_cleanup(struct lan743x_adapter *adapter)
static void lan743x_mdiobus_cleanup(struct lan743x_adapter *adapter)
{
+ if (adapter->xpcs)
+ xpcs_destroy(adapter->xpcs);
+
mdiobus_unregister(adapter->mdiobus);
}
@@ -3498,6 +3627,8 @@ static void lan743x_full_cleanup(struct lan743x_adapter *adapter)
{
unregister_netdev(adapter->netdev);
+ phylink_destroy(adapter->phylink);
+
if (adapter->sfp_dev)
platform_device_unregister(adapter->sfp_dev);
@@ -3548,17 +3679,13 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
if (ret)
return ret;
- if (adapter->is_sfp_support_en) {
+ if (adapter->is_sfp_support_en && !adapter->nodes) {
ret = lan743x_swnodes_register(adapter);
if (ret) {
netdev_err(adapter->netdev,
"failed to register software nodes\n");
return ret;
}
- } else {
- ret = lan743x_phy_init(adapter);
- if (ret)
- return ret;
}
ret = lan743x_ptp_init(adapter);
@@ -3588,6 +3715,7 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
{
+ struct dw_xpcs *xpcs;
u32 sgmii_ctl;
int ret;
@@ -3608,8 +3736,14 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
"SGMII operation\n");
adapter->mdiobus->read = lan743x_mdiobus_read_c22;
adapter->mdiobus->write = lan743x_mdiobus_write_c22;
- adapter->mdiobus->read_c45 = lan743x_mdiobus_read_c45;
- adapter->mdiobus->write_c45 = lan743x_mdiobus_write_c45;
+ if (adapter->is_sfp_support_en) {
+ adapter->mdiobus->read_c45 = pci11x1x_pcs_read;
+ adapter->mdiobus->write_c45 = pci11x1x_pcs_write;
+ } else {
+ adapter->mdiobus->read_c45 = lan743x_mdiobus_read_c45;
+ adapter->mdiobus->write_c45 = lan743x_mdiobus_write_c45;
+ }
+
adapter->mdiobus->name = "lan743x-mdiobus-c45";
netif_dbg(adapter, drv, adapter->netdev,
"lan743x-mdiobus-c45\n");
@@ -3645,9 +3779,26 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
ret = mdiobus_register(adapter->mdiobus);
if (ret < 0)
goto return_error;
+
+ if (adapter->is_sfp_support_en) {
+ if (!adapter->phy_interface)
+ lan743x_phy_interface_select(adapter);
+
+ xpcs = xpcs_create_mdiodev(adapter->mdiobus, 0,
+ adapter->phy_interface);
+ if (IS_ERR(xpcs)) {
+ netdev_err(adapter->netdev,
+ "failed to create xpcs\n");
+ return PTR_ERR(xpcs);
+ }
+
+ adapter->xpcs = xpcs;
+ }
+
return 0;
return_error:
+ mdiobus_free(adapter->mdiobus);
return ret;
}
@@ -3717,6 +3868,15 @@ static int lan743x_pcidev_probe(struct pci_dev *pdev,
adapter->netdev->features = NETIF_F_SG | NETIF_F_TSO |
NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
adapter->netdev->hw_features = adapter->netdev->features;
+ /* Default Link-Speed-Duplex (LSD) state */
+ adapter->sgmii_lsd = LINK_2500_MASTER;
+
+ ret = lan743x_phylink_create(adapter->netdev);
+ if (ret < 0) {
+ netif_err(adapter, probe, netdev,
+ "failed to setup phylink (%d)\n", ret);
+ goto cleanup_hardware;
+ }
if (adapter->is_sfp_support_en) {
adapter->i2c_adap->dev.fwnode =
@@ -3730,9 +3890,6 @@ static int lan743x_pcidev_probe(struct pci_dev *pdev,
}
}
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
ret = register_netdev(adapter->netdev);
if (ret < 0)
goto cleanup_mdiobus;
@@ -6,6 +6,7 @@
#include <linux/phy.h>
#include <linux/property.h>
+#include <linux/phylink.h>
#include "lan743x_ptp.h"
#define DRIVER_AUTHOR "Bryan Whitehead <Bryan.Whitehead@microchip.com>"
@@ -317,6 +318,9 @@
/* Vendor Specific SGMII MMD details */
#define SR_VSMMD_PCS_ID1 0x0004
#define SR_VSMMD_PCS_ID2 0x0005
+#define SR_MII_CTRL MII_BMCR
+#define SR_MII_STS MII_BMSR
+#define SR_MII_STS_LINK_STS_ BIT(2)
#define SR_VSMMD_STS 0x0008
#define SR_VSMMD_CTRL 0x0009
@@ -1083,6 +1087,9 @@ struct lan743x_adapter {
struct lan743x_sw_nodes *nodes;
struct i2c_adapter *i2c_adap;
struct platform_device *sfp_dev;
+ struct dw_xpcs *xpcs;
+ struct phylink *phylink;
+ struct phylink_config phylink_config;
};
#define LAN743X_COMPONENT_FLAG_RX(channel) BIT(20 + (channel))
@@ -1203,5 +1210,7 @@ void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
void lan743x_mac_flow_ctrl_set_enables(struct lan743x_adapter *adapter,
bool tx_enable, bool rx_enable);
int lan743x_sgmii_read(struct lan743x_adapter *adapter, u8 mmd, u16 addr);
+void lan743x_mac_cfg_update(struct lan743x_adapter *adapter, bool link,
+ int speed, const unsigned long *advertise);
#endif /* _LAN743X_H */