[v6,7/8] soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
Commit Message
Add ACPI support for Tegra194 & Tegra243 SoC's. This requires
following modifications to the probe when ACPI boot is used:
- Initialize soc data.
- Add nvmem lookups.
- Register soc device.
- use devm_clk_get_optional() instead of devm_clk_get() to get
fuse->clk, as fuse clocks are not required when using ACPI boot.
Also, drop '__init' keyword for tegra_soc_device_register() as this is also
used by tegra_fuse_probe() and use dev_err_probe() wherever applicable.
Signed-off-by: Kartik <kkartik@nvidia.com>
---
v4 -> v5:
* Fix build warnings seen with tegra_fuse_acpi_match when
CONFIG_ACPI is disabled.
v3 -> v4:
* Use dev_fwnode() to dereference the fwnode.
* Add MODULE_DEVICE_TABLE for tegra_fuse_acpi_match.
* Moved tegra_fuse_acpi_match above tegra_fuse_driver i.e.,
close to the user of tegra_fuse_acpi_match.
* Moved the improvements made to fuse clk/rst get error handling
to separate patch.
* Moved ACPI related initialization after fuse->base is
initialized in tegra_fuse_probe(), as this triggers a warning
in tegra_fuse_read_early() which is called from
fuse->soc->init().
v2 -> v3:
* Updated commit message to specify changes related to inclusion
of dev_err_probe().
v1 -> v2:
* Updated ACPI ID table 'tegra_fuse_acpi_match'.
* Removed ',' after "{ /* sentinel */ }" in
'tegra_fuse_acpi_match'.
* Using same probe for ACPI and device-tree boot.
* Added code for required initialization when ACPI boot is used.
* Make clocks optional for ACPI.
* Use dev_err_probe() wherever applicable.
* Check if clock has been initialized only when device-tree
boot is used.
---
drivers/soc/tegra/fuse/fuse-tegra.c | 52 +++++++++++++++++++++++++++--
1 file changed, 49 insertions(+), 3 deletions(-)
Comments
On Mon, Oct 16, 2023 at 03:44:35PM +0530, Kartik wrote:
> Add ACPI support for Tegra194 & Tegra243 SoC's. This requires
> following modifications to the probe when ACPI boot is used:
> - Initialize soc data.
> - Add nvmem lookups.
> - Register soc device.
> - use devm_clk_get_optional() instead of devm_clk_get() to get
> fuse->clk, as fuse clocks are not required when using ACPI boot.
>
> Also, drop '__init' keyword for tegra_soc_device_register() as this is also
> used by tegra_fuse_probe() and use dev_err_probe() wherever applicable.
...
> +static const struct acpi_device_id __maybe_unused tegra_fuse_acpi_match[] = {
Drop __maybe_unused along with ACPI_PTR(), they are more confusing than helpful.
> + { "NVDA200F" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(acpi, tegra_fuse_acpi_match);
> +
> static struct platform_driver tegra_fuse_driver = {
> .driver = {
> .name = "tegra-fuse",
> .of_match_table = tegra_fuse_match,
> + .acpi_match_table = ACPI_PTR(tegra_fuse_acpi_match),
> .pm = &tegra_fuse_pm,
> .suppress_bind_attrs = true,
> },
@@ -3,11 +3,13 @@
* Copyright (c) 2013-2023, NVIDIA CORPORATION. All rights reserved.
*/
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/kobject.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/mod_devicetable.h>
#include <linux/nvmem-consumer.h>
#include <linux/nvmem-provider.h>
#include <linux/of.h>
@@ -152,7 +154,38 @@ static int tegra_fuse_probe(struct platform_device *pdev)
return PTR_ERR(fuse->base);
fuse->phys = res->start;
- fuse->clk = devm_clk_get(&pdev->dev, "fuse");
+ /* Initialize the soc data and lookups if using ACPI boot. */
+ if (is_acpi_node(dev_fwnode(&pdev->dev)) && !fuse->soc) {
+ u8 chip;
+
+ tegra_acpi_init_apbmisc();
+
+ chip = tegra_get_chip_id();
+ switch (chip) {
+#if defined(CONFIG_ARCH_TEGRA_194_SOC)
+ case TEGRA194:
+ fuse->soc = &tegra194_fuse_soc;
+ break;
+#endif
+#if defined(CONFIG_ARCH_TEGRA_234_SOC)
+ case TEGRA234:
+ fuse->soc = &tegra234_fuse_soc;
+ break;
+#endif
+ default:
+ return dev_err_probe(&pdev->dev, -EINVAL, "Unsupported SoC: %02x\n", chip);
+ }
+
+ fuse->soc->init(fuse);
+ tegra_fuse_print_sku_info(&tegra_sku_info);
+ tegra_soc_device_register();
+
+ err = tegra_fuse_add_lookups(fuse);
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "failed to add FUSE lookups\n");
+ }
+
+ fuse->clk = devm_clk_get_optional(&pdev->dev, "fuse");
if (IS_ERR(fuse->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(fuse->clk), "failed to get FUSE clock\n");
@@ -275,10 +308,17 @@ static const struct dev_pm_ops tegra_fuse_pm = {
SET_SYSTEM_SLEEP_PM_OPS(tegra_fuse_suspend, tegra_fuse_resume)
};
+static const struct acpi_device_id __maybe_unused tegra_fuse_acpi_match[] = {
+ { "NVDA200F" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, tegra_fuse_acpi_match);
+
static struct platform_driver tegra_fuse_driver = {
.driver = {
.name = "tegra-fuse",
.of_match_table = tegra_fuse_match,
+ .acpi_match_table = ACPI_PTR(tegra_fuse_acpi_match),
.pm = &tegra_fuse_pm,
.suppress_bind_attrs = true,
},
@@ -300,7 +340,13 @@ u32 __init tegra_fuse_read_early(unsigned int offset)
int tegra_fuse_readl(unsigned long offset, u32 *value)
{
- if (!fuse->read || !fuse->clk)
+ /*
+ * Wait for fuse->clk to be initialized if device-tree boot is used.
+ */
+ if (is_of_node(dev_fwnode(fuse->dev)) && !fuse->clk)
+ return -EPROBE_DEFER;
+
+ if (!fuse->read)
return -EPROBE_DEFER;
if (IS_ERR(fuse->clk))
@@ -383,7 +429,7 @@ const struct attribute_group tegra194_soc_attr_group = {
};
#endif
-struct device * __init tegra_soc_device_register(void)
+struct device *tegra_soc_device_register(void)
{
struct soc_device_attribute *attr;
struct soc_device *dev;