diff mbox series

USB: serial: option: add Fibocom to DELL custom modem FM101R-GL

Message ID 20231016073616.519051-1-puliang.lu@fibocom.com
State New
Headers
Series USB: serial: option: add Fibocom to DELL custom modem FM101R-GL |

Commit Message

Puliang Lu Oct. 16, 2023, 7:36 a.m. UTC 
  From: Puliang Lu <puliang.lu@fibocom.com>

Update the USB serial option driver support for the Fibocom
FM101R-GL
LTE modules as there are actually several different variants.
- VID:PID 413C:8213, FM101R-GL are laptop M.2 cards (with
MBIM interfaces for Linux)
- VID:PID 413C:8215, FM101R-GL ESIM are laptop M.2 cards(with
MBIM interface for Linux)

0x8213: mbim, tty
0x8215: mbim, tty

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=8213 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=8215 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
---
 drivers/usb/serial/option.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Johan Hovold Oct. 16, 2023, 8:23 a.m. UTC | #1 
On Mon, Oct 16, 2023 at 03:36:16PM +0800, L-鲁璞亮 wrote:
> From: Puliang Lu <puliang.lu@fibocom.com>
> 
> Update the USB serial option driver support for the Fibocom
> FM101R-GL

> T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=413c ProdID=8213 Rev= 5.04
> S:  Manufacturer=Fibocom Wireless Inc.
> S:  Product=Fibocom FM101-GL Module
> S:  SerialNumber=a3b7cbf0
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
> A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
> E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
> I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
> E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Thanks for resending with the author address fixed.

You did however not answer my question whether there could ever be more
vendor class interfaces (e.g. for adb) so that you should be using a
more specific match for the entries (i.e. USB_DEVICE_AND_INTERFACE_INFO())?

> +	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R, 0xff) },
> +	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R_ESIM, 0xff) },

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8ac98e60fff5..1dcd1f068f23 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -203,6 +203,9 @@  static void option_instat_callback(struct urb *urb);
 #define DELL_PRODUCT_5829E_ESIM			0x81e4
 #define DELL_PRODUCT_5829E			0x81e6
 
+#define DELL_PRODUCT_FM101R			0x8213
+#define DELL_PRODUCT_FM101R_ESIM		0x8215
+
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
 #define KYOCERA_PRODUCT_KPC680			0x180a
@@ -1107,6 +1110,8 @@  static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(0) | RSVD(6) },
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM),
 	  .driver_info = RSVD(0) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R_ESIM, 0xff) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },