[v2,1/2] dt-bindings: i2c: mv64xxx: add reset-gpios property

Message ID 20231016023504.3976746-2-chris.packham@alliedtelesis.co.nz
State New
Headers
Series i2c: mv64xxx: reset-gpios |

Commit Message

Chris Packham Oct. 16, 2023, 2:35 a.m. UTC
  Add reset-gpios and reset-delay-us properties to the marvell,mv64xxx-i2c
binding. These can be used to describe hardware where a common reset
GPIO is connected to all downstream devices on and I2C bus. This reset
will be released before the downstream devices on the bus are probed.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - Update commit message
    - Add reset-delay-us property

 .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml        | 6 ++++++
 1 file changed, 6 insertions(+)
  

Comments

Krzysztof Kozlowski Oct. 16, 2023, 5:25 a.m. UTC | #1
On 16/10/2023 04:35, Chris Packham wrote:
> Add reset-gpios and reset-delay-us properties to the marvell,mv64xxx-i2c
> binding. These can be used to describe hardware where a common reset
> GPIO is connected to all downstream devices on and I2C bus. This reset
> will be released before the downstream devices on the bus are probed.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v2:
>     - Update commit message
>     - Add reset-delay-us property
> 
>  .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml        | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> index 461d1c9ee3f7..7223797b0572 100644
> --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> @@ -70,6 +70,12 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  reset-gpios:
> +    maxItems: 1
> +
> +  reset-delay-us:
> +    description: Delay in us to wait after reset gpio de-assertion.

Add:
  default: XXXX


Best regards,
Krzysztof
  
Rob Herring Oct. 17, 2023, 7:34 p.m. UTC | #2
On Mon, Oct 16, 2023 at 03:35:03PM +1300, Chris Packham wrote:
> Add reset-gpios and reset-delay-us properties to the marvell,mv64xxx-i2c
> binding. These can be used to describe hardware where a common reset
> GPIO is connected to all downstream devices on and I2C bus. This reset
> will be released before the downstream devices on the bus are probed.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v2:
>     - Update commit message
>     - Add reset-delay-us property
> 
>  .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml        | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> index 461d1c9ee3f7..7223797b0572 100644
> --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> @@ -70,6 +70,12 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  reset-gpios:
> +    maxItems: 1

It would be worth saying this is common for all downstream devices on 
the I2C bus here.

> +
> +  reset-delay-us:
> +    description: Delay in us to wait after reset gpio de-assertion.
> +
>    dmas:
>      items:
>        - description: RX DMA Channel
> -- 
> 2.42.0
>
  

Patch

diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 461d1c9ee3f7..7223797b0572 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -70,6 +70,12 @@  properties:
   resets:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  reset-delay-us:
+    description: Delay in us to wait after reset gpio de-assertion.
+
   dmas:
     items:
       - description: RX DMA Channel