arm64: dts: qcom: msm8953: add SPI interfaces
Commit Message
From: Gianluca Boiano <morf3089@gmail.com>
This change add spi_3, spi_5 and spi_6 interfaces to
MSM8953 devices.
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 102 ++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
@@ -726,6 +726,48 @@ i2c_8_sleep: i2c-8-sleep-state {
bias-disable;
};
+ spi_3_default: spi-3-default-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_spi3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_3_sleep: spi-3-sleep-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_5_default: spi-5-default-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_spi5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_5_sleep: spi-5-sleep-state {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_6_default: spi-6-default-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_spi6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_6_sleep: spi-6-sleep-state {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
wcnss_pin_a: wcnss-active-state {
wcss-wlan2-pins {
@@ -1360,6 +1402,26 @@ i2c_3: i2c@78b7000 {
status = "disabled";
};
+ spi_3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_3_default>;
+ pinctrl-1 = <&spi_3_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@ i2c_5: i2c@7af5000 {
status = "disabled";
};
+ spi_5: spi@7af5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07af5000 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_5_default>;
+ pinctrl-1 = <&spi_5_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_6: i2c@7af6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@ i2c_6: i2c@7af6000 {
status = "disabled";
};
+ spi_6: spi@7af6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07af6000 0x600>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_6_default>;
+ pinctrl-1 = <&spi_6_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_7: i2c@7af7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af7000 0x600>;