[v2,4/6] drm/ssd130x: Add support for the SSD132x OLED controller family

Message ID 20231012065822.1007930-5-javierm@redhat.com
State New
Headers
Series drm/solomon: Add support for the SSD132x controller family |

Commit Message

Javier Martinez Canillas Oct. 12, 2023, 6:58 a.m. UTC
  The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

Changes in v2:
- Align the rectangle to the segment width (Geert Uytterhoeven).

 drivers/gpu/drm/solomon/Kconfig       |  12 +-
 drivers/gpu/drm/solomon/ssd130x-i2c.c |  17 +-
 drivers/gpu/drm/solomon/ssd130x-spi.c |  21 ++-
 drivers/gpu/drm/solomon/ssd130x.c     | 234 +++++++++++++++++++++++++-
 drivers/gpu/drm/solomon/ssd130x.h     |   4 +
 5 files changed, 275 insertions(+), 13 deletions(-)
  

Comments

Geert Uytterhoeven Oct. 12, 2023, 7:57 a.m. UTC | #1
Hi Javier,

On Thu, Oct 12, 2023 at 8:58 AM Javier Martinez Canillas
<javierm@redhat.com> wrote:
> The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
> are used by 16 grayscale dot matrix OLED panels, extend the driver to also
> support this chip family.
>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> Changes in v2:
> - Align the rectangle to the segment width (Geert Uytterhoeven).

Thanks for the update!

> --- a/drivers/gpu/drm/solomon/ssd130x.c
> +++ b/drivers/gpu/drm/solomon/ssd130x.c

> +static int ssd132x_update_rect(struct ssd130x_device *ssd130x,
> +                              struct drm_rect *rect, u8 *buf,
> +                              u8 *data_array)
> +{
> +       unsigned int x = rect->x1;
> +       unsigned int y = rect->y1;
> +       unsigned int segment_width = SSD132X_SEGMENT_WIDTH;
> +       unsigned int width = drm_rect_width(rect);
> +       unsigned int height = drm_rect_height(rect);
> +       unsigned int columns = DIV_ROUND_UP(width, segment_width);
> +       unsigned int rows = height;
> +       struct drm_device *drm = &ssd130x->drm;
> +       u32 array_idx = 0;
> +       int ret, i, j;

unsigned int i, j;

> +
> +       drm_WARN_ONCE(drm, x % segment_width != 0, "x must be aligned to screen segment\n");
> +
> +       /*
> +        * The screen is divided in Segment and Common outputs, where
> +        * COM0 to COM[N - 1] are the rows and SEG0 to SEG[M - 1] are
> +        * the columns.
> +        *
> +        * Each Segment has a 4-bit pixel and each Common output has a
> +        * row of pixels. When using the (default) horizontal address
> +        * increment mode, each byte of data sent to the controller has
> +        * two Segments (e.g: SEG0 and SEG1) that are stored in the lower
> +        * and higher nibbles of a single byte representing one column.
> +        * That is, the first byte are SEG0 (D0[3:0]) and SEG1 (D0[7:4]),
> +        * the second byte are SEG2 (D1[3:0]) and SEG3 (D1[7:4]) and so on.
> +        */
> +
> +       /* Set column start and end */
> +       ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_COL_RANGE, x / segment_width, columns - 1);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Set row start and end */
> +       ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_ROW_RANGE, y, rows - 1);
> +       if (ret < 0)
> +               return ret;
> +
> +       for (i = 0; i < height; i++) {
> +               /* Process pair of pixels and combine them into a single byte */
> +               for (j = 0; j < width; j += segment_width) {
> +                       u8 n1 = buf[i * width + j];
> +                       u8 n2 = buf[i * width + j + 1];
> +
> +                       data_array[array_idx++] = (n2 << 4) | n1;
> +               }
> +       }
> +
> +       /* Write out update in one go since horizontal addressing mode is used */
> +       ret = ssd130x_write_data(ssd130x, data_array, columns * rows);
> +
> +       return ret;
> +}

Gr{oetje,eeting}s,

                        Geert
  
Javier Martinez Canillas Oct. 12, 2023, 8:05 a.m. UTC | #2
Geert Uytterhoeven <geert@linux-m68k.org> writes:

Hello Geert,

Thanks for your feedback.

> Hi Javier,
>

[...]

>> +       u32 array_idx = 0;
>> +       int ret, i, j;
>
> unsigned int i, j;
>

Right, I'll change that in v3.
  

Patch

diff --git a/drivers/gpu/drm/solomon/Kconfig b/drivers/gpu/drm/solomon/Kconfig
index e170716d976b..c3ee956c2bb9 100644
--- a/drivers/gpu/drm/solomon/Kconfig
+++ b/drivers/gpu/drm/solomon/Kconfig
@@ -1,31 +1,31 @@ 
 config DRM_SSD130X
-	tristate "DRM support for Solomon SSD130x OLED displays"
+	tristate "DRM support for Solomon SSD13xx OLED displays"
 	depends on DRM && MMU
 	select BACKLIGHT_CLASS_DEVICE
 	select DRM_GEM_SHMEM_HELPER
 	select DRM_KMS_HELPER
 	help
-	  DRM driver for the SSD130x Solomon and SINO WEALTH SH110x OLED
+	  DRM driver for the SSD13xx Solomon and SINO WEALTH SH110x OLED
 	  controllers. This is only for the core driver, a driver for the
 	  appropriate bus transport in your chip also must be selected.
 
 	  If M is selected the module will be called ssd130x.
 
 config DRM_SSD130X_I2C
-	tristate "DRM support for Solomon SSD130x OLED displays (I2C bus)"
+	tristate "DRM support for Solomon SSD13xx OLED displays (I2C bus)"
 	depends on DRM_SSD130X && I2C
 	select REGMAP_I2C
 	help
-	  Say Y here if the SSD130x or SH110x OLED display is connected via
+	  Say Y here if the SSD13xx or SH110x OLED display is connected via
 	  I2C bus.
 
 	  If M is selected the module will be called ssd130x-i2c.
 
 config DRM_SSD130X_SPI
-	tristate "DRM support for Solomon SSD130X OLED displays (SPI bus)"
+	tristate "DRM support for Solomon SSD13xx OLED displays (SPI bus)"
 	depends on DRM_SSD130X && SPI
 	select REGMAP
 	help
-	  Say Y here if the SSD130x OLED display is connected via SPI bus.
+	  Say Y here if the SSD13xx OLED display is connected via SPI bus.
 
 	  If M is selected the module will be called ssd130x-spi.
diff --git a/drivers/gpu/drm/solomon/ssd130x-i2c.c b/drivers/gpu/drm/solomon/ssd130x-i2c.c
index 8f89b89d553f..f2ccab9c06d9 100644
--- a/drivers/gpu/drm/solomon/ssd130x-i2c.c
+++ b/drivers/gpu/drm/solomon/ssd130x-i2c.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * DRM driver for Solomon SSD130x OLED displays (I2C bus)
+ * DRM driver for Solomon SSD13xx OLED displays (I2C bus)
  *
  * Copyright 2022 Red Hat Inc.
  * Author: Javier Martinez Canillas <javierm@redhat.com>
@@ -14,7 +14,7 @@ 
 #include "ssd130x.h"
 
 #define DRIVER_NAME	"ssd130x-i2c"
-#define DRIVER_DESC	"DRM driver for Solomon SSD130x OLED displays (I2C)"
+#define DRIVER_DESC	"DRM driver for Solomon SSD13xx OLED displays (I2C)"
 
 static const struct regmap_config ssd130x_i2c_regmap_config = {
 	.reg_bits = 8,
@@ -92,6 +92,19 @@  static const struct of_device_id ssd130x_of_match[] = {
 		.compatible = "solomon,ssd1309fb-i2c",
 		.data = &ssd130x_variants[SSD1309_ID],
 	},
+	/* ssd132x family */
+	{
+		.compatible = "solomon,ssd1322",
+		.data = &ssd130x_variants[SSD1322_ID],
+	},
+	{
+		.compatible = "solomon,ssd1325",
+		.data = &ssd130x_variants[SSD1325_ID],
+	},
+	{
+		.compatible = "solomon,ssd1327",
+		.data = &ssd130x_variants[SSD1327_ID],
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ssd130x_of_match);
diff --git a/drivers/gpu/drm/solomon/ssd130x-spi.c b/drivers/gpu/drm/solomon/ssd130x-spi.c
index 89989da705d7..84e035a7ab3f 100644
--- a/drivers/gpu/drm/solomon/ssd130x-spi.c
+++ b/drivers/gpu/drm/solomon/ssd130x-spi.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * DRM driver for Solomon SSD130X OLED displays (SPI bus)
+ * DRM driver for Solomon SSD13xx OLED displays (SPI bus)
  *
  * Copyright 2022 Red Hat Inc.
  * Authors: Javier Martinez Canillas <javierm@redhat.com>
@@ -11,7 +11,7 @@ 
 #include "ssd130x.h"
 
 #define DRIVER_NAME	"ssd130x-spi"
-#define DRIVER_DESC	"DRM driver for Solomon SSD130X OLED displays (SPI)"
+#define DRIVER_DESC	"DRM driver for Solomon SSD13xx OLED displays (SPI)"
 
 struct ssd130x_spi_transport {
 	struct spi_device *spi;
@@ -129,6 +129,19 @@  static const struct of_device_id ssd130x_of_match[] = {
 		.compatible = "solomon,ssd1309",
 		.data = &ssd130x_variants[SSD1309_ID],
 	},
+	/* ssd132x family */
+	{
+		.compatible = "solomon,ssd1322",
+		.data = &ssd130x_variants[SSD1322_ID],
+	},
+	{
+		.compatible = "solomon,ssd1325",
+		.data = &ssd130x_variants[SSD1325_ID],
+	},
+	{
+		.compatible = "solomon,ssd1327",
+		.data = &ssd130x_variants[SSD1327_ID],
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ssd130x_of_match);
@@ -149,6 +162,10 @@  static const struct spi_device_id ssd130x_spi_table[] = {
 	{ "ssd1306", SSD1306_ID },
 	{ "ssd1307", SSD1307_ID },
 	{ "ssd1309", SSD1309_ID },
+	/* ssd132x family */
+	{ "ssd1322", SSD1322_ID },
+	{ "ssd1325", SSD1325_ID },
+	{ "ssd1327", SSD1327_ID },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(spi, ssd130x_spi_table);
diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 4bdc06d6aed4..94a6a6ebd6e8 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * DRM driver for Solomon SSD130x OLED displays
+ * DRM driver for Solomon SSD13xx OLED displays
  *
  * Copyright 2022 Red Hat Inc.
  * Author: Javier Martinez Canillas <javierm@redhat.com>
@@ -37,13 +37,15 @@ 
 #include "ssd130x.h"
 
 #define DRIVER_NAME	"ssd130x"
-#define DRIVER_DESC	"DRM driver for Solomon SSD130x OLED displays"
+#define DRIVER_DESC	"DRM driver for Solomon SSD13xx OLED displays"
 #define DRIVER_DATE	"20220131"
 #define DRIVER_MAJOR	1
 #define DRIVER_MINOR	0
 
 #define SSD130X_PAGE_HEIGHT 8
 
+#define SSD132X_SEGMENT_WIDTH 2
+
 /* ssd13xx commands */
 #define SSD13XX_CONTRAST			0x81
 #define SSD13XX_SET_SEG_REMAP			0xa0
@@ -99,10 +101,29 @@ 
 #define SSD130X_SET_AREA_COLOR_MODE_ENABLE	0x1e
 #define SSD130X_SET_AREA_COLOR_MODE_LOW_POWER	0x05
 
+/* ssd132x commands */
+#define SSD132X_SET_COL_RANGE			0x15
+#define SSD132X_SET_DEACTIVATE_SCROLL		0x2e
+#define SSD132X_SET_ROW_RANGE			0x75
+#define SSD132X_SET_DISPLAY_START		0xa1
+#define SSD132X_SET_DISPLAY_OFFSET		0xa2
+#define SSD132X_SET_DISPLAY_NORMAL		0xa4
+#define SSD132X_SET_FUNCTION_SELECT_A		0xab
+#define SSD132X_SET_PHASE_LENGTH		0xb1
+#define SSD132X_SET_CLOCK_FREQ			0xb3
+#define SSD132X_SET_GPIO			0xb5
+#define SSD132X_SET_PRECHARGE_PERIOD		0xb6
+#define SSD132X_SET_GRAY_SCALE_TABLE		0xb8
+#define SSD132X_SELECT_DEFAULT_TABLE		0xb9
+#define SSD132X_SET_PRECHARGE_VOLTAGE		0xbc
+#define SSD130X_SET_VCOMH_VOLTAGE		0xbe
+#define SSD132X_SET_FUNCTION_SELECT_B		0xd5
+
 #define MAX_CONTRAST 255
 
 enum ssd130x_family_ids {
-	SSD130X_FAMILY
+	SSD130X_FAMILY,
+	SSD132X_FAMILY
 };
 
 static const struct ssd130x_funcs ssd130x_family_funcs[];
@@ -150,6 +171,22 @@  const struct ssd130x_deviceinfo ssd130x_variants[] = {
 		.default_width = 128,
 		.default_height = 64,
 		.funcs = &ssd130x_family_funcs[SSD130X_FAMILY],
+	},
+	/* ssd132x family */
+	[SSD1322_ID] = {
+		.default_width = 480,
+		.default_height = 128,
+		.funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
+	},
+	[SSD1325_ID] = {
+		.default_width = 128,
+		.default_height = 80,
+		.funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
+	},
+	[SSD1327_ID] = {
+		.default_width = 128,
+		.default_height = 128,
+		.funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
 	}
 };
 EXPORT_SYMBOL_NS_GPL(ssd130x_variants, DRM_SSD130X);
@@ -643,6 +680,189 @@  static void ssd130x_clear_screen(struct ssd130x_device *ssd130x, u8 *data_array)
 	}
 }
 
+static int ssd132x_init(struct ssd130x_device *ssd130x)
+{
+	int ret;
+
+	/* Set initial contrast */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_CONTRAST, 0x80);
+	if (ret < 0)
+		return ret;
+
+	/* Set column start and end */
+	ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_COL_RANGE, 0x00,
+				ssd130x->width / SSD132X_SEGMENT_WIDTH - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Set row start and end */
+	ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_ROW_RANGE, 0x00, ssd130x->height - 1);
+	if (ret < 0)
+		return ret;
+	/*
+	 * Horizontal Address Increment
+	 * Re-map for Column Address, Nibble and COM
+	 * COM Split Odd Even
+	 */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_SET_SEG_REMAP, 0x53);
+	if (ret < 0)
+		return ret;
+
+	/* Set display start and offset */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_DISPLAY_START, 0x00);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_DISPLAY_OFFSET, 0x00);
+	if (ret < 0)
+		return ret;
+
+	/* Set display mode normal */
+	ret = ssd130x_write_cmd(ssd130x, 1, SSD132X_SET_DISPLAY_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	/* Set multiplex ratio value */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_SET_MULTIPLEX_RATIO, ssd130x->height - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Set phase length */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PHASE_LENGTH, 0x55);
+	if (ret < 0)
+		return ret;
+
+	/* Select default linear gray scale table */
+	ret = ssd130x_write_cmd(ssd130x, 1, SSD132X_SELECT_DEFAULT_TABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Set clock frequency */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_CLOCK_FREQ, 0x01);
+	if (ret < 0)
+		return ret;
+
+	/* Enable internal VDD regulator */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_FUNCTION_SELECT_A, 0x1);
+	if (ret < 0)
+		return ret;
+
+	/* Set pre-charge period */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PRECHARGE_PERIOD, 0x01);
+	if (ret < 0)
+		return ret;
+
+	/* Set pre-charge voltage */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PRECHARGE_VOLTAGE, 0x08);
+	if (ret < 0)
+		return ret;
+
+	/* Set VCOMH voltage */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_VCOMH_VOLTAGE, 0x07);
+	if (ret < 0)
+		return ret;
+
+	/* Enable second pre-charge and internal VSL */
+	ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_FUNCTION_SELECT_B, 0x62);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ssd132x_set_buffer_sizes(struct ssd130x_device *ssd130x)
+{
+	unsigned int buffer_pitch;
+	unsigned int columns = DIV_ROUND_UP(ssd130x->width, SSD132X_SEGMENT_WIDTH);
+	unsigned int rows = ssd130x->height;
+
+	ssd130x->data_array_size = columns * rows;
+
+	ssd130x->buffer_fi = drm_format_info(DRM_FORMAT_R8);
+
+	if (!ssd130x->buffer_fi)
+		return -EINVAL;
+
+	buffer_pitch = drm_format_info_min_pitch(ssd130x->buffer_fi, 0, ssd130x->width);
+	ssd130x->buffer_size = buffer_pitch * ssd130x->height;
+
+	return 0;
+}
+
+static void ssd132x_align_rect(struct ssd130x_device *ssd130x,
+			       struct drm_rect *rect)
+{
+	/* Align x to display segment boundaries */
+	rect->x1 = round_down(rect->x1, SSD132X_SEGMENT_WIDTH);
+	rect->x2 = min_t(unsigned int, round_up(rect->x2, SSD132X_SEGMENT_WIDTH),
+			 ssd130x->width);
+}
+
+static int ssd132x_update_rect(struct ssd130x_device *ssd130x,
+			       struct drm_rect *rect, u8 *buf,
+			       u8 *data_array)
+{
+	unsigned int x = rect->x1;
+	unsigned int y = rect->y1;
+	unsigned int segment_width = SSD132X_SEGMENT_WIDTH;
+	unsigned int width = drm_rect_width(rect);
+	unsigned int height = drm_rect_height(rect);
+	unsigned int columns = DIV_ROUND_UP(width, segment_width);
+	unsigned int rows = height;
+	struct drm_device *drm = &ssd130x->drm;
+	u32 array_idx = 0;
+	int ret, i, j;
+
+	drm_WARN_ONCE(drm, x % segment_width != 0, "x must be aligned to screen segment\n");
+
+	/*
+	 * The screen is divided in Segment and Common outputs, where
+	 * COM0 to COM[N - 1] are the rows and SEG0 to SEG[M - 1] are
+	 * the columns.
+	 *
+	 * Each Segment has a 4-bit pixel and each Common output has a
+	 * row of pixels. When using the (default) horizontal address
+	 * increment mode, each byte of data sent to the controller has
+	 * two Segments (e.g: SEG0 and SEG1) that are stored in the lower
+	 * and higher nibbles of a single byte representing one column.
+	 * That is, the first byte are SEG0 (D0[3:0]) and SEG1 (D0[7:4]),
+	 * the second byte are SEG2 (D1[3:0]) and SEG3 (D1[7:4]) and so on.
+	 */
+
+	/* Set column start and end */
+	ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_COL_RANGE, x / segment_width, columns - 1);
+	if (ret < 0)
+		return ret;
+
+	/* Set row start and end */
+	ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_ROW_RANGE, y, rows - 1);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < height; i++) {
+		/* Process pair of pixels and combine them into a single byte */
+		for (j = 0; j < width; j += segment_width) {
+			u8 n1 = buf[i * width + j];
+			u8 n2 = buf[i * width + j + 1];
+
+			data_array[array_idx++] = (n2 << 4) | n1;
+		}
+	}
+
+	/* Write out update in one go since horizontal addressing mode is used */
+	ret = ssd130x_write_data(ssd130x, data_array, columns * rows);
+
+	return ret;
+}
+
+static void ssd132x_clear_screen(struct ssd130x_device *ssd130x, u8 *data_array)
+{
+	memset(data_array, 0, ssd130x->data_array_size);
+
+	/* Write out update in one go since horizontal addressing mode is used */
+	ssd130x_write_data(ssd130x, data_array, ssd130x->data_array_size);
+}
+
 static const struct ssd130x_funcs ssd130x_family_funcs[] = {
 	[SSD130X_FAMILY] = {
 		.init = ssd130x_init,
@@ -652,6 +872,14 @@  static const struct ssd130x_funcs ssd130x_family_funcs[] = {
 		.clear_screen = ssd130x_clear_screen,
 		.fmt_convert = drm_fb_xrgb8888_to_mono,
 	},
+	[SSD132X_FAMILY] = {
+		.init = ssd132x_init,
+		.set_buffer_sizes = ssd132x_set_buffer_sizes,
+		.align_rect = ssd132x_align_rect,
+		.update_rect = ssd132x_update_rect,
+		.clear_screen = ssd132x_clear_screen,
+		.fmt_convert = drm_fb_xrgb8888_to_gray8,
+	}
 };
 
 static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb,
diff --git a/drivers/gpu/drm/solomon/ssd130x.h b/drivers/gpu/drm/solomon/ssd130x.h
index b508ab98be2f..e93288b5a9c2 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -32,6 +32,10 @@  enum ssd130x_variants {
 	SSD1306_ID,
 	SSD1307_ID,
 	SSD1309_ID,
+	/* ssd132x family */
+	SSD1322_ID,
+	SSD1325_ID,
+	SSD1327_ID,
 	NR_SSD130X_VARIANTS
 };