diff mbox series

[5/6] tty: Add SBI debug console support to HVC SBI driver

Message ID 20231010170503.657189-6-apatel@ventanamicro.com
State New
Headers
Series RISC-V SBI debug console extension support |

Commit Message

Anup Patel Oct. 10, 2023, 5:05 p.m. UTC 
  From: Atish Patra <atishp@rivosinc.com>

RISC-V SBI specification supports advanced debug console
support via SBI DBCN extension.

Extend the HVC SBI driver to support it.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/tty/hvc/Kconfig         |  2 +-
 drivers/tty/hvc/hvc_riscv_sbi.c | 80 ++++++++++++++++++++++++++++++---
 2 files changed, 74 insertions(+), 8 deletions(-)

Comments

Greg KH Oct. 10, 2023, 5:12 p.m. UTC | #1 
On Tue, Oct 10, 2023 at 10:35:02PM +0530, Anup Patel wrote:
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -15,6 +15,7 @@
>  
>  #include "hvc_console.h"
>  
> +#ifdef CONFIG_RISCV_SBI_V01

Please no #ifdef in a .c file, that's not a good style for Linux code at
all.

And what if you want to build the driver for both options here?  What
will happen?

> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf))
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +	else
> +		pa = __pa(buf);
> +
> +	ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> +#ifdef CONFIG_32BIT
> +		  count, pa, (u64)pa >> 32,
> +#else
> +		  count, pa, 0,
> +#endif

This is not how to do an api, sorry, again, please no #ifdef if you want
to support this code for the next 20+ years.

thanks,

gre gk-h
Anup Patel Oct. 11, 2023, 5:51 a.m. UTC | #2 
On Tue, Oct 10, 2023 at 10:42 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Tue, Oct 10, 2023 at 10:35:02PM +0530, Anup Patel wrote:
> > --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> > +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> > @@ -15,6 +15,7 @@
> >
> >  #include "hvc_console.h"
> >
> > +#ifdef CONFIG_RISCV_SBI_V01
>
> Please no #ifdef in a .c file, that's not a good style for Linux code at
> all.
>
> And what if you want to build the driver for both options here?  What
> will happen?

Okay, I will remove all #ifdef from .c file

>
> > +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
> >  {
> > -     return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf))
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +     else
> > +             pa = __pa(buf);
> > +
> > +     ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > +#ifdef CONFIG_32BIT
> > +               count, pa, (u64)pa >> 32,
> > +#else
> > +               count, pa, 0,
> > +#endif
>
> This is not how to do an api, sorry, again, please no #ifdef if you want
> to support this code for the next 20+ years.

Sure, I will update like you suggested.

>
> thanks,
>
> gre gk-h

Thanks,
Anup
diff mbox series

Patch

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 4f9264d005c0..6e05c5c7bca1 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -108,7 +108,7 @@  config HVC_DCC_SERIALIZE_SMP
 
 config HVC_RISCV_SBI
 	bool "RISC-V SBI console support"
-	depends on RISCV_SBI_V01
+	depends on RISCV_SBI
 	select HVC_DRIVER
 	help
 	  This enables support for console output via RISC-V SBI calls, which
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
index 31f53fa77e4a..be8b7e351840 100644
--- a/drivers/tty/hvc/hvc_riscv_sbi.c
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -15,6 +15,7 @@ 
 
 #include "hvc_console.h"
 
+#ifdef CONFIG_RISCV_SBI_V01
 static int hvc_sbi_tty_put(uint32_t vtermno, const char *buf, int count)
 {
 	int i;
@@ -39,21 +40,86 @@  static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
 	return i;
 }
 
-static const struct hv_ops hvc_sbi_ops = {
+static const struct hv_ops hvc_sbi_v01_ops = {
 	.get_chars = hvc_sbi_tty_get,
 	.put_chars = hvc_sbi_tty_put,
 };
+#endif
 
-static int __init hvc_sbi_init(void)
+static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
 {
-	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf))
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+	else
+		pa = __pa(buf);
+
+	ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+#ifdef CONFIG_32BIT
+		  count, pa, (u64)pa >> 32,
+#else
+		  count, pa, 0,
+#endif
+		  0, 0, 0);
+
+	if (ret.error)
+		return 0;
+
+	return count;
 }
-device_initcall(hvc_sbi_init);
 
-static int __init hvc_sbi_console_init(void)
+static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
 {
-	hvc_instantiate(0, 0, &hvc_sbi_ops);
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf))
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+	else
+		pa = __pa(buf);
+
+	ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+#ifdef CONFIG_32BIT
+		  count, pa, (u64)pa >> 32,
+#else
+		  count, pa, 0,
+#endif
+		  0, 0, 0);
+
+	if (ret.error)
+		return 0;
+
+	return ret.value;
+}
+
+static const struct hv_ops hvc_sbi_dbcn_ops = {
+	.put_chars = hvc_sbi_dbcn_tty_put,
+	.get_chars = hvc_sbi_dbcn_tty_get,
+};
+
+static int __init hvc_sbi_init(void)
+{
+	int err;
+
+	if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+	    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 16));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
+	} else {
+#ifdef CONFIG_RISCV_SBI_V01
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 16));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
+#else
+		return -ENODEV;
+#endif
+	}
 
 	return 0;
 }
-console_initcall(hvc_sbi_console_init);
+device_initcall(hvc_sbi_init);