[net-next,v2,2/5] net: stmmac: use correct PPS capture input index
Commit Message
The stmmac supports up to 4 auxiliary snapshots that can be enabled by
setting the appropriate bits in the PTP_ACR bitfield.
Previously as of commit f4da56529da6 ("net: stmmac: Add support for
external trigger timestamping") instead of setting the bits, a fixed
value was written to this bitfield instead of passing the appropriate
bitmask.
Now the correct bit is set according to the ptp_clock_request.extts_index
passed as a parameter to stmmac_enable().
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
---
Changelog:
v1 > v2: no functional changes. reword commit message and remove fixes-tag
as discussed with Simon and Jakub. Thanks to both for reviewing my patches!
---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 5 ++---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 2 +-
2 files changed, 3 insertions(+), 4 deletions(-)
@@ -201,12 +201,11 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
acr_value &= ~PTP_ACR_MASK;
if (on) {
/* Enable External snapshot trigger */
- acr_value |= priv->plat->ext_snapshot_num;
+ acr_value |= PTP_ACR_ATSEN(rq->extts.index);
acr_value |= PTP_ACR_ATSFC;
}
netdev_dbg(priv->dev, "Auxiliary Snapshot %d %s.\n",
- priv->plat->ext_snapshot_num >> PTP_ACR_ATSEN_SHIFT,
- on ? "enabled" : "disabled");
+ rq->extts.index, on ? "enabled" : "disabled");
writel(acr_value, ptpaddr + PTP_ACR);
mutex_unlock(&priv->aux_ts_lock);
/* wait for auxts fifo clear to finish */
@@ -79,7 +79,7 @@
#define PTP_ACR_ATSEN1 BIT(5) /* Auxiliary Snapshot 1 Enable */
#define PTP_ACR_ATSEN2 BIT(6) /* Auxiliary Snapshot 2 Enable */
#define PTP_ACR_ATSEN3 BIT(7) /* Auxiliary Snapshot 3 Enable */
-#define PTP_ACR_ATSEN_SHIFT 5 /* Auxiliary Snapshot shift */
+#define PTP_ACR_ATSEN(index) (PTP_ACR_ATSEN0 << (index))
#define PTP_ACR_MASK GENMASK(7, 4) /* Aux Snapshot Mask */
#define PMC_ART_VALUE0 0x01 /* PMC_ART[15:0] timer value */
#define PMC_ART_VALUE1 0x02 /* PMC_ART[31:16] timer value */