diff mbox series

[net-next] octeon_ep: pack hardware structures

Message ID 20231006120225.2259533-1-srasheed@marvell.com
State New
Headers
Series [net-next] octeon_ep: pack hardware structures |

Commit Message

Shinas Rasheed Oct. 6, 2023, 12:02 p.m. UTC 
  Add packed attribute to hardware structures.

Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
---
 drivers/net/ethernet/marvell/octeon_ep/octep_rx.h | 6 +++---
 drivers/net/ethernet/marvell/octeon_ep/octep_tx.h | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

Comments

Paolo Abeni Oct. 10, 2023, 9:28 a.m. UTC | #1 
On Fri, 2023-10-06 at 05:02 -0700, Shinas Rasheed wrote:
> Add packed attribute to hardware structures.

Could you please elaborate a bit more why this is needed? Is this a
bugfix? Or something needed by later changes? Please update the
changelog accordingly

Thanks!

Paolo
Shinas Rasheed Oct. 10, 2023, 7:20 p.m. UTC | #2 
Hi Paolo,

Could you please elaborate a bit more why this is needed? 
>>> This is a necessary commit as these structures should be packed since they represent hardware data structures and padding is not allowed by hardware.

Is this a bugfix? 
>>> There are no issues observed due to this, but this should be updated anyway.

Please update the changelog accordingly
>>>  I shall include more information in the changelog as well.

Thanks!

Paolo
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
index 782a24f27f3e..ca42ddb77491 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
@@ -19,7 +19,7 @@ 
 struct octep_oq_desc_hw {
 	dma_addr_t buffer_ptr;
 	u64 info_ptr;
-};
+} __packed;
 
 #define OCTEP_OQ_DESC_SIZE    (sizeof(struct octep_oq_desc_hw))
 
@@ -38,7 +38,7 @@  struct octep_oq_resp_hw_ext {
 
 	/* checksum verified. */
 	u64 csum_verified:2;
-};
+} __packed;
 
 #define  OCTEP_OQ_RESP_HW_EXT_SIZE   (sizeof(struct octep_oq_resp_hw_ext))
 
@@ -49,7 +49,7 @@  struct octep_oq_resp_hw_ext {
 struct octep_oq_resp_hw {
 	/* The Length of the packet. */
 	__be64 length;
-};
+} __packed;
 
 #define OCTEP_OQ_RESP_HW_SIZE   (sizeof(struct octep_oq_resp_hw))
 
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
index 21e75ff9f5e7..74189e5a7d33 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
@@ -35,7 +35,7 @@ 
 struct octep_tx_sglist_desc {
 	u16 len[4];
 	dma_addr_t dma_ptr[4];
-};
+} __packed;
 
 /* Each Scatter/Gather entry sent to hardwar hold four pointers.
  * So, number of entries required is (MAX_SKB_FRAGS + 1)/4, where '+1'
@@ -238,7 +238,7 @@  struct octep_instr_hdr {
 
 	/* Reserved3 */
 	u64 reserved3:1;
-};
+} __packed;
 
 /* Hardware Tx completion response header */
 struct octep_instr_resp_hdr {
@@ -262,7 +262,7 @@  struct octep_instr_resp_hdr {
 
 	/* Opcode for the return packet  */
 	u64 opcode:16;
-};
+} __packed;
 
 /* 64-byte Tx instruction format.
  * Format of instruction for a 64-byte mode input queue.
@@ -292,7 +292,7 @@  struct octep_tx_desc_hw {
 
 	/* Additional headers available in a 64-byte instruction. */
 	u64 exhdr[4];
-};
+} __packed;
 
 #define OCTEP_IQ_DESC_SIZE (sizeof(struct octep_tx_desc_hw))
 #endif /* _OCTEP_TX_H_ */