diff mbox series

[RESEND,v11,5/5] arm64: dts: ti: k3-am69-sk: Add DP and HDMI support

Message ID 20231005132732.7462-6-j-choudhary@ti.com
State New
Headers
Series Enable Display for J784S4 and AM69-SK platform |

Commit Message

Jayesh Choudhary Oct. 5, 2023, 1:27 p.m. UTC 
  From: Dasnavis Sabiya <sabiya.d@ti.com>

AM69 starter kit features an HDMI port and an eDP port.

Add assigned clocks for DSS, DT node for DisplayPort PHY,
pinmux for HDMI hotplug and power down, mcu_i2c1 and dss_vout
for HDMI.
Also enable Serdes4 settings for DP display.

Add the endpoint nodes to describe connection from:
DSS => MHDP => DisplayPort connector
DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector

Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
[j-choudhary@ti.com: Fix dvi-bridge, dss, mhdp and serdes-refclk]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 229 ++++++++++++++++++++++++++
 1 file changed, 229 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index bc1d21ff6d03..3dc98926f2e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -251,6 +251,76 @@  vdd_sd_dv: regulator-tlv71033 {
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
 	};
+
+	dp0_pwr_3v3: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pwr_en_pins_default>;
+		gpio = <&main_gpio0 4 0>;	/* DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: connector-dp0 {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+		ddc-i2c-bus = <&mcu_i2c1>;
+		hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;	/* HDMI_HPD */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	bridge-dvi {
+		compatible = "ti,tfp410";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_pdn_pins_default>;
+		powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>;	/* HDMI_PDn */
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi1_out0>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_pmx0 {
@@ -308,6 +378,57 @@  J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */
 			J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */
 		>;
 	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */
+		>;
+	};
+
+	dp_pwr_en_pins_default: dp-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */
+			J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */
+			J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */
+			J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */
+			J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */
+			J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */
+			J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */
+			J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */
+			J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */
+			J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */
+			J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */
+			J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */
+			J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */
+			J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */
+			J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */
+			J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */
+			J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */
+			J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */
+			J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */
+			J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */
+			J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */
+			J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */
+			J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */
+			J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */
+			J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */
+			J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */
+			J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */
+			J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */
+		>;
+	};
 };
 
 &wkup_pmx2 {
@@ -382,6 +503,21 @@  J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */
 			J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */
 		>;
 	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			/* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0)
+			/* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0)
+		>;
+	};
+
+	hdmi_pdn_pins_default: hdmi-pdn-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */
+		>;
+	};
 };
 
 &wkup_pmx3 {
@@ -666,3 +802,96 @@  &c71_3 {
 	memory-region = <&c71_3_dma_memory_region>,
 			<&c71_3_memory_region>;
 };
+
+&wkup_gpio_intr {
+	status = "okay";
+};
+
+&mcu_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&serdes_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+	assigned-clocks = <&k3_clks 218 2>,
+			  <&k3_clks 218 5>,
+			  <&k3_clks 218 14>,
+			  <&k3_clks 218 18>;
+	assigned-clock-parents = <&k3_clks 218 3>,
+				 <&k3_clks 218 7>,
+				 <&k3_clks 218 16>,
+				 <&k3_clks 218 22>;
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+	serdes4_dp_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+	};
+};
+
+&mhdp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+	phys = <&serdes4_dp_link>;
+	phy-names = "dpphy";
+};
+
+&dss_ports {
+	/* DP */
+	port@0 {
+		reg = <0>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	/* HDMI */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
+
+&dp0_ports {
+
+	port@0 {
+		reg = <0>;
+
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		dp0_out: endpoint {
+			remote-endpoint = <&dp0_connector_in>;
+		};
+	};
+};