[v3,6/8] wifi: wfx: scan_lock is global to the device
Commit Message
Currently, one scan_lock is associated to each vif. However, concurrent
scan on vifs is explicitly prohibited by the device. Currently,
scan_lock is associated with a vif but it is always locked with
conf_mutex (there is a case where conf_mutex is not associated to
scan_lock but scan_lock is tested on all interfaces). So concurrent scan
on vifs cannot happen.
So, this patch relocate scan_lock to the device and simplify the code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
drivers/net/wireless/silabs/wfx/main.c | 2 ++
drivers/net/wireless/silabs/wfx/scan.c | 4 ++--
drivers/net/wireless/silabs/wfx/sta.c | 11 +++--------
drivers/net/wireless/silabs/wfx/wfx.h | 3 +--
4 files changed, 8 insertions(+), 12 deletions(-)
@@ -246,6 +246,7 @@ static void wfx_free_common(void *data)
mutex_destroy(&wdev->tx_power_loop_info_lock);
mutex_destroy(&wdev->rx_stats_lock);
+ mutex_destroy(&wdev->scan_lock);
mutex_destroy(&wdev->conf_mutex);
ieee80211_free_hw(wdev->hw);
}
@@ -314,6 +315,7 @@ struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_da
gpiod_set_consumer_name(wdev->pdata.gpio_wakeup, "wfx wakeup");
mutex_init(&wdev->conf_mutex);
+ mutex_init(&wdev->scan_lock);
mutex_init(&wdev->rx_stats_lock);
mutex_init(&wdev->tx_power_loop_info_lock);
init_completion(&wdev->firmware_ready);
@@ -95,7 +95,7 @@ void wfx_hw_scan_work(struct work_struct *work)
int chan_cur, ret, err;
mutex_lock(&wvif->wdev->conf_mutex);
- mutex_lock(&wvif->scan_lock);
+ mutex_lock(&wvif->wdev->scan_lock);
if (wvif->join_in_progress) {
dev_info(wvif->wdev->dev, "abort in-progress REQ_JOIN");
wfx_reset(wvif);
@@ -116,7 +116,7 @@ void wfx_hw_scan_work(struct work_struct *work)
ret = -ETIMEDOUT;
}
} while (ret >= 0 && chan_cur < hw_req->req.n_channels);
- mutex_unlock(&wvif->scan_lock);
+ mutex_unlock(&wvif->wdev->scan_lock);
mutex_unlock(&wvif->wdev->conf_mutex);
wfx_ieee80211_scan_completed_compat(wvif->wdev->hw, ret < 0);
}
@@ -97,7 +97,7 @@ void wfx_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
FIF_PROBE_REQ | FIF_PSPOLL;
/* Filters are ignored during the scan. No frames are filtered. */
- if (mutex_is_locked(&wvif->scan_lock))
+ if (mutex_is_locked(&wdev->scan_lock))
return;
mutex_lock(&wdev->conf_mutex);
@@ -621,18 +621,14 @@ int wfx_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set)
void wfx_suspend_resume_mc(struct wfx_vif *wvif, enum sta_notify_cmd notify_cmd)
{
- struct wfx_vif *wvif_it;
-
if (notify_cmd != STA_NOTIFY_AWAKE)
return;
/* Device won't be able to honor CAB if a scan is in progress on any interface. Prefer to
* skip this DTIM and wait for the next one.
*/
- wvif_it = NULL;
- while ((wvif_it = wvif_iterate(wvif->wdev, wvif_it)) != NULL)
- if (mutex_is_locked(&wvif_it->scan_lock))
- return;
+ if (mutex_is_locked(&wvif->wdev->scan_lock))
+ return;
if (!wfx_tx_queues_has_cab(wvif) || wvif->after_dtim_tx_allowed)
dev_warn(wvif->wdev->dev, "incorrect sequence (%d CAB in queue)",
@@ -730,7 +726,6 @@ int wfx_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
complete(&wvif->set_pm_mode_complete);
INIT_WORK(&wvif->tx_policy_upload_work, wfx_tx_policy_upload_work);
- mutex_init(&wvif->scan_lock);
init_completion(&wvif->scan_complete);
INIT_WORK(&wvif->scan_work, wfx_hw_scan_work);
@@ -43,6 +43,7 @@ struct wfx_dev {
struct delayed_work cooling_timeout_work;
bool poll_irq;
bool chip_frozen;
+ struct mutex scan_lock;
struct mutex conf_mutex;
struct wfx_hif_cmd hif_cmd;
@@ -80,8 +81,6 @@ struct wfx_vif {
unsigned long uapsd_mask;
- /* avoid some operations in parallel with scan */
- struct mutex scan_lock;
struct work_struct scan_work;
struct completion scan_complete;
int scan_nb_chan_done;