diff mbox series

[RFC] ASoC: codecs: aw88261: Remove non-existing reset gpio

Message ID 20230929-aw88261-reset-v1-1-fcbce194a823@fairphone.com
State New
Headers
Series [RFC] ASoC: codecs: aw88261: Remove non-existing reset gpio |

Commit Message

Luca Weiss Sept. 29, 2023, 10:28 a.m. UTC 
  According to the AW88261 datasheet (V1.1) and device schematics I have
access to, there is no reset gpio present on the AW88261. Remove it.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
In case this looks okay, also to the driver author at Awinic, the
binding doc also needs to be updated to include this change and not
require (or even allow) the reset-gpios anymore.

Therefore this is marked RFC for now.
---
 sound/soc/codecs/aw88261.c | 15 ---------------
 1 file changed, 15 deletions(-)


---
base-commit: b216fb8946f819cf1b63dc12c7867cc501bda57e
change-id: 20230929-aw88261-reset-7e00d9e25952

Best regards,
diff mbox series

Patch

diff --git a/sound/soc/codecs/aw88261.c b/sound/soc/codecs/aw88261.c
index 45eaf931a69c..e7683f70c2ef 100644
--- a/sound/soc/codecs/aw88261.c
+++ b/sound/soc/codecs/aw88261.c
@@ -10,7 +10,6 @@ 
 
 #include <linux/i2c.h>
 #include <linux/firmware.h>
-#include <linux/of_gpio.h>
 #include <linux/regmap.h>
 #include <sound/soc.h>
 #include "aw88261.h"
@@ -1175,14 +1174,6 @@  static const struct snd_soc_component_driver soc_codec_dev_aw88261 = {
 	.remove = aw88261_codec_remove,
 };
 
-static void aw88261_hw_reset(struct aw88261 *aw88261)
-{
-	gpiod_set_value_cansleep(aw88261->reset_gpio, 0);
-	usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
-	gpiod_set_value_cansleep(aw88261->reset_gpio, 1);
-	usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
-}
-
 static void aw88261_parse_channel_dt(struct aw88261 *aw88261)
 {
 	struct aw_device *aw_dev = aw88261->aw_pa;
@@ -1254,12 +1245,6 @@  static int aw88261_i2c_probe(struct i2c_client *i2c)
 
 	i2c_set_clientdata(i2c, aw88261);
 
-	aw88261->reset_gpio = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(aw88261->reset_gpio))
-		dev_info(&i2c->dev, "reset gpio not defined\n");
-	else
-		aw88261_hw_reset(aw88261);
-
 	aw88261->regmap = devm_regmap_init_i2c(i2c, &aw88261_remap_config);
 	if (IS_ERR(aw88261->regmap)) {
 		ret = PTR_ERR(aw88261->regmap);