[v2,01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32

Message ID 20230928122427.313271-2-christophe.roullier@foss.st.com
State New
Headers
Series Series to deliver Ethernets for STM32MP13 |

Commit Message

Christophe Roullier Sept. 28, 2023, 12:24 p.m. UTC
  New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 78 +++++++++++++++++--
 1 file changed, 70 insertions(+), 8 deletions(-)
  

Patch

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dc..ca976281bfc22 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -22,18 +22,17 @@  select:
         enum:
           - st,stm32-dwmac
           - st,stm32mp1-dwmac
+          - st,stm32mp13-dwmac
   required:
     - compatible
 
-allOf:
-  - $ref: snps,dwmac.yaml#
-
 properties:
   compatible:
     oneOf:
       - items:
           - enum:
               - st,stm32mp1-dwmac
+              - st,stm32mp13-dwmac
           - const: snps,dwmac-4.20a
       - items:
           - enum:
@@ -74,13 +73,10 @@  properties:
 
   st,syscon:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      - items:
-          - description: phandle to the syscon node which encompases the glue register
-          - description: offset of the control register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
-      encompases the glue register, and the offset of the control register
+      encompases the glue register, the offset of the control register and
+      the mask to set bitfield in control register
 
   st,eth-clk-sel:
     description:
@@ -101,6 +97,38 @@  required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp1-dwmac
+              - st,stm32-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            items:
+              - description: phandle to the syscon node which encompases the glue register
+              - description: offset of the control register
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp13-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            items:
+              - description: phandle to the syscon node which encompases the glue register
+              - description: offset of the control register
+              - description: field to set mask in register
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -161,3 +189,37 @@  examples:
            snps,pbl = <8>;
            phy-mode = "mii";
        };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 4
+     ethernet3: ethernet@5800a000 {
+           compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                                 <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq",
+                             "eth_wake_irq";
+           clock-names = "stmmaceth",
+                         "mac-clk-tx",
+                         "mac-clk-rx",
+                         "eth-ck",
+                         "ptp_ref",
+                         "ethstp";
+           clocks = <&rcc ETHMAC>,
+                    <&rcc ETHTX>,
+                    <&rcc ETHRX>,
+                    <&rcc ETHCK_K>,
+                    <&rcc ETHPTP_K>,
+                    <&rcc ETHSTP>;
+           st,syscon = <&syscfg 0x4 0xff0000>;
+           snps,mixed-burst;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_1>;
+           snps,tso;
+           phy-mode = "rmii";
+     };