[V2,3/3] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

Message ID 20230926162042.14180-4-quic_nitirawa@quicinc.com
State New
Headers
Series Add UFS host controller and Phy nodes for sc7280 |

Commit Message

Nitin Rawat Sept. 26, 2023, 4:20 p.m. UTC
  Add UFS host controller and PHY nodes for sc7280 IDP board.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--
2.17.1
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..a0059527d9e4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@ 
 	status = "okay";
 };

+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };