Briefly introduce FRED, and its advantages compared to IDT.
Signed-off-by: Xin Li <xin3.li@intel.com>
---
Changes since v10:
* Reword a sentence to improve readability (Nikolay Borisov).
---
Documentation/arch/x86/x86_64/fred.rst | 96 +++++++++++++++++++++++++
Documentation/arch/x86/x86_64/index.rst | 1 +
2 files changed, 97 insertions(+)
create mode 100644 Documentation/arch/x86/x86_64/fred.rst
new file mode 100644
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Flexible Return and Event Delivery (FRED)
+=========================================
+
+Overview
+========
+
+The FRED architecture defines simple new transitions that change
+privilege level (ring transitions). The FRED architecture was
+designed with the following goals:
+
+1) Improve overall performance and response time by replacing event
+ delivery through the interrupt descriptor table (IDT event
+ delivery) and event return by the IRET instruction with lower
+ latency transitions.
+
+2) Improve software robustness by ensuring that event delivery
+ establishes the full supervisor context and that event return
+ establishes the full user context.
+
+The new transitions defined by the FRED architecture are FRED event
+delivery and, for returning from events, two FRED return instructions.
+FRED event delivery can effect a transition from ring 3 to ring 0, but
+it is used also to deliver events incident to ring 0. One FRED
+instruction (ERETU) effects a return from ring 0 to ring 3, while the
+other (ERETS) returns while remaining in ring 0. Collectively, FRED
+event delivery and the FRED return instructions are FRED transitions.
+
+In addition to these transitions, the FRED architecture defines a new
+instruction (LKGS) for managing the state of the GS segment register.
+The LKGS instruction can be used by 64-bit operating systems that do
+not use the new FRED transitions.
+
+Furthermore, the FRED architecture is easy to extend for future CPU
+architectures.
+
+Software based event dispatching
+================================
+
+FRED operates differently from IDT in terms of event handling. Instead
+of directly dispatching an event to its handler based on the event
+vector, FRED requires the software to dispatch an event to its handler
+based on both the event's type and vector. Therefore, an event dispatch
+framework must be implemented to facilitate the event-to-handler
+dispatch process. The FRED event dispatch framework takes control
+once an event is delivered, and employs a two-level dispatch.
+
+The first level dispatching is event type based, and the second level
+dispatching is event vector based.
+
+Full supervisor/user context
+============================
+
+FRED event delivery atomically save and restore full supervisor/user
+context upon event delivery and return. Thus it avoids the problem of
+transient states due to %cr2 and/or %dr6, and it is no longer needed
+to handle all the ugly corner cases caused by half baked entry states.
+
+FRED allows explicit unblock of NMI with new event return instructions
+ERETS/ERETU, avoiding the mess caused by IRET which unconditionally
+unblocks NMI, e.g., when an exception happens during NMI handling.
+
+FRED always restores the full value of %rsp, thus ESPFIX is no longer
+needed when FRED is enabled.
+
+LKGS
+====
+
+LKGS behaves like the MOV to GS instruction except that it loads the
+base address into the IA32_KERNEL_GS_BASE MSR instead of the GS
+segment’s descriptor cache. With LKGS, it ends up with avoiding
+mucking with kernel GS, i.e., an operating system can always operate
+with its own GS base address.
+
+Because FRED event delivery from ring 3 and ERETU both swap the value
+of the GS base address and that of the IA32_KERNEL_GS_BASE MSR, plus
+the introduction of LKGS instruction, the SWAPGS instruction is no
+longer needed when FRED is enabled, thus is disallowed (#UD).
+
+Stack levels
+============
+
+4 stack levels 0~3 are introduced to replace the nonreentrant IST for
+event handling, and each stack level should be configured to use a
+dedicated stack.
+
+The current stack level could be unchanged or go higher upon FRED
+event delivery. If unchanged, the CPU keeps using the current event
+stack. If higher, the CPU switches to a new event stack specified by
+the MSR of the new stack level, i.e., MSR_IA32_FRED_RSP[123].
+
+Only execution of a FRED return instruction ERET[US], could lower the
+current stack level, causing the CPU to switch back to the stack it was
+on before a previous event delivery that promoted the stack level.
@@ -15,3 +15,4 @@ x86_64 Support
cpu-hotplug-spec
machinecheck
fsgs
+ fred