[2/2] arm64: dts: qcom: apq8016-sbc-d3-camera: Convert to DT overlay
Commit Message
Follow the example of the recently added apq8016-sbc-usb-host.dtso and
convert apq8016-sbc-d3-camera-mezzanine.dts to a DT overlay that can be
applied on top of the apq8016-sbc.dtb. This makes it more clear that
this is not a special type of DB410c but just an addon board that can
be added on top.
Functionally there should not be any difference since
apq8016-sbc-d3-camera-mezzanine.dtb is still generated as before
(but now by applying the overlay on top of apq8016-sbc.dtb).
Since dtc does not know that there are default #address/size-cells in
msm8916.dtsi, repeat those in the overlay to avoid dtc warnings because
it expects the wrong amount of address/size-cells.
It would be nice to have a generic overlay for the D3 camera mezzanine
(that can be applied to all 96Boards) but that's much more complicated
than providing a board-specific DT overlay as intermediate step.
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
NOTE: I haven't tried booting this (since I don't have the camera
mezzanine) but I compared the resulting apq8016-sbc-d3-camera-mezzanine.dtb
which seems to be equivalent to the old one (aside from phandle
numbering and ordering).
It wouldn't hurt if someone could try booting this to be sure. :-)
---
arch/arm64/boot/dts/qcom/Makefile | 5 +++--
...ra-mezzanine.dts => apq8016-sbc-d3-camera-mezzanine.dtso} | 12 ++++++++++--
2 files changed, 13 insertions(+), 4 deletions(-)
@@ -1,10 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
-apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+apq8016-sbc-d3-camera-mezzanine-dtbs := apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo
+apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
-dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
similarity index 89%
rename from arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
rename to arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
@@ -5,10 +5,12 @@
*/
/dts-v1/;
+/plugin/;
-#include "apq8016-sbc.dts"
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/gpio/gpio.h>
-/ {
+&{/} {
camera_vdddo_1v8: regulator-camera-vdddo {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
@@ -38,6 +40,9 @@ &camss {
status = "okay";
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
@@ -53,6 +58,9 @@ &cci {
};
&cci_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
camera@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;